Fendt 900 Vario

More documents

Recommendations

Info

Power lift linkage with Electro Hydraulic Response (EHR) Powerful hydraulics for heavy implements The lift capacities of the front and rear power lift linkages on the 900 Vario have been significantly increased compared to the previous models. The EHR rear linkage has a maximum capacity of 19,800 lbs (8,981 kg) at link ends and 9,000 lbs (4,082 kg) at link ends on the front. This allows the 900 Vario to lift heavy implements. The front power lift is an integral part of the tractor design. The coupling point is therefore relatively close to the tractor, which has a favorable effect on the weight distribution of the tractor when equipped with mounted front implements. Regarding linkage design, the 900 Vario is well designed to the last detail. For example, the top link can remain on the tractor, even when not in use. Premium class hydraulic equipment In the Profi version, the 900 Vario has enough hydraulic options for most farm applications. The EHR rear linkage can be switched over to double-acting mode with the terminal. A double-acting comfort front power lift and front power lift are available as options instead of the standard comfort front ballast. In the Profi version, up to eight electric double-acting auxiliary control units are optionally available. The connections at the rear are all connect-under-pressure lever couplings. Modern implements demand even greater flexibility and performance from the tractor hydraulics. Fast lifting and high flow rates are required for economical operation. The 900 Vario models, with their loadsensing hydraulics and electrical hydraulic valves, are well-equipped for comfortable operation. Electrical valves: first-rate work and control comfort flow rate raise timer function settings flow rate lower The 900 Vario in the Power version has a simpler range of equipment than the Profi version and is designed for heavy-duty traction work with conventional implements. It can be equipped with a maximum of four electric auxiliary control valves (4 electric hydraulic valves are standard). These are controlled by the fingertip controls. A crossgate lever and multi-function joystick are not available in the Power version. When using the optional front hydraulics, these are controlled via one of the fingertip controls. A double-acting comfort power lift is not available with this model. In contrast to the Profi version, the rear linkage is single-acting. lock Powerful hydraulic system activate timer function activate external valve actuation You can control electric proportional valves with the multi-function joystick, crossgate lever, and the fingertip controls. These are all double-acting controlled valves, which can be used in a single-acting capacity, and also feature a floating position. The valve controls for the first two valves are located on the convenient crossgate lever. Setting the valve functions with the Varioterminal is simple. Using the rotary control and function keys, you can easily and precisely control the flow rates and actuation times of all electric proportional valves, set valve priority or activate external controls for a valve. The 900 Vario is equipped with a load-sensing hydraulic system. Modern axial piston pumps deliver the exact quantity of hydraulic oil required–up to 42 gpm (160 Lpm). A maximum of 23 gallons (87 liters) of hydraulic oil is available for mounted or trailed implements. The hydraulics and transmission have separate oil reservoirs, which permit unrestricted use of bio-oils for the hydraulics.
EHR rear power lift with reserves The electrohydraulic rear power lift, which has a maximum lift capacity of 19,800 lbs (8,981 kg) at link ends, guarantees that in practical operation even heavy rear-mounted implements designed for this power class can be lifted to the fullest lift height without trouble. The standardequipment shock-load stabilizing counteracts vehicle bounce by actively raising and lowering the power lift during transport. Auxiliary valve equipment for all tasks In the Profi version, the 900 Vario already has four electric double-acting auxiliary control valves as standard and can be upgraded to eight control valves. These are controlled via the crossgate lever, fingertip control valve and the multi-function joystick. If front hydraulic valves are required, individual hydraulic lines are available when used with the comfort front power lift. • Load-sensing hydraulics • Hydraulic oil delivery capacity: 4 gpm (160 lpm) (optional 57 gpm ( 16 lpm) • EHR maximum lift capacities: Rear: 19,800 lbs (9,000 kg) at link ends Front: 9,000 lbs (4,091 kg) at link ends • Rear linkage with: - shock-load stabilizing - quick lift - lift height limiter - lowering rate control - position, draft and mixed control - external actuation • Double-acting rear power lift * • Integral front power lift with gas shock absorbers and external controls • Up to 8 electric hydraulic valve controls* • Crossgate lever* • Maximum available hydraulic oil quantity: gallons (87 L) • Bio-oils can be used for the hydraulics thanks to separate oil supplies * Profi version
Page 1 and 2: Fendt 900 Vario
Page 3 and 4: Fendt 9 180 PTO hp 1 4 kW Fendt 9 4
Page 5 and 6: More power and more comfort The new
Page 7 and 8: More than ordinary suspension The t
Page 9 and 10: The multi-function armrest can be a
Page 11: AGRex external EGR - economical and
Page 14 and 15: Leading-edge technology The fourth-
Page 16 and 17: They said it couldn’t be done - t
Page 19 and 20: New tire size High engine power alo
Page 21: The automatic PTO start-up control
Page 25 and 26: egardless of the length of operatio
Page 27 and 28: All operating functions are integra
Page 29 and 30: Fast, accurate diagnostics from tra
Page 31 and 32: 1 Standard and optional equipment 9

Fendt 900 Vario

Create successful ePaper yourself

Delete template?

Save as template?