HOT167-1

More documents

Recommendations

Info

Infineon Technologies Corp. June 99 How to set up your system: kitCON-167CR/CS HW setup Connect your Starter Kit board to your IBM compatible PC using a serial cable (connector P1 to COM1) Attention Windows 95 users: It is recommended to disable the FIFO Buffer in Settings/Control Panel/System/Device Manager/Ports/COM1/Port Settings/Advanced. Switch 1 of the blue DIP switches needs to be set to ON (this activates the bootstrap loader)* Attach an unregulated power supply with 8V to 12V / 500 mA to X5 on the kitCON-167. Double check the correct polarity. The red LED in the power supply area will light to indicate correct power supply. Press switch S1 to perform a reset. * older versions of the kitCON-167 boards (without blue DIP switches): Connect jumper JP2 at 1+2 (usually a red jumper) <strong>HOT167</strong>-1 Version 2.0 46
Infineon Technologies Corp. June 99 How to set up your system: kitCON-167CR/CS HW setup (cont.) Memory Map of kitCON-167CR/CS in Bootstrap Mode: Data Area: 0x0FEA00 .. 0x0FEBFF Code Area: 0x0FEC00 .. 0x0FFFFF The available RAM is 0 .. 0xD8FF and may be used as ROM or RAM in the Options - Target dialog <strong>HOT167</strong>-1 Version 2.0 47
Page 1 and 2: Infineon Technologies Corp. June 99
Page 3: Infineon Technologies Corp. June 99
Page 14 and 15: High-Integration General Purpose Lo
Page 28: Code Segments (64K each) 256KB Inte
Page 95:
Infineon Technologies Corp. June 99
Page 101 and 102:
Page 103 and 104:
Page 106:
Page 109:
Page 113 and 114:
Page 115:
Page 118:
Page 123 and 124:
Page 125:
Page 131 and 132:
Page 133 and 134:
Page 136:
Page 139 and 140:
Page 141 and 142:
Page 144 and 145:
Page 146:
Page 151 and 152:
Page 153:
Page 159 and 160:
Page 161 and 162:
Page 164:
Page 168 and 169:
Page 171:
Page 175 and 176:
Page 179 and 180:
Page 184:
Page 188 and 189:
Page 190 and 191:
Page 192:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218:
Page 223 and 224:
Page 225:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238:
Page 241 and 242:
Page 243 and 244:
Page 246 and 247:
Page 248:
Page 251:
show all

HOT167-1

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?