Manual (PDF) - certon systems GmbH
Manual (PDF) - certon systems GmbH
Manual (PDF) - certon systems GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.<strong>certon</strong>.de<br />
6.11 Language<br />
• You may change the language of the Control-Center to German, English, Russian or French with<br />
the Button Language. Select the right Language and acknowledge with OK.<br />
6.12 Create date and time.<br />
• Out of the Box your studioRAID Blueline is set up for automatic updating of system time via<br />
the Internet. You can change the settings for date and time manually if you disable the<br />
checkbox. By pressing OK you can acknowledge your settings.<br />
6.13 Set up network<br />
• Factory-provided the studioRAID Blueline-System is configured for use with a DHCP-Server.<br />
• The studioRAID Blueline-System is accessible at the address given by the DHCP-Server. Type<br />
the address in the address bar of your web browser.<br />
• If no DHCP-Server is available in your network, you can reach the studioRAID Blueline-System<br />
at IP address 192.168.0.149.<br />
• You can always reach the studioRAID Blueline if:<br />
• No DHCP-Server is available in the network, that gives an automatically assigned address to the<br />
studioRAID Blueline and no other computer in the network is available with the address<br />
192.168.0.149. In this case the new address is reported at the display. You did not manually<br />
assign another fixed IP address in the Control Center. Then the studioRAID Blueline NAS is<br />
available at your fixed IP address.<br />
Furthermore the studioRAID Blueline supports Bonjour/Zeroconf. This protocol is useful for the<br />
automatic assignment of IP addresses in small networks without a DHCP server. The studioRAID<br />
Blueline is always accessible at a second address. This second IP address is in the range of<br />
Seite 18