FinePix A201 Owner's Manual - Fujifilm USA

3
ERASING SINGLE FRAME
Press “d” or “c” to display the image to be
erased.
4
Press the “MENU/OK” button to erase the
displayed image. When erasing is complete,
the next image appears and the “¨”
message is displayed.
●! “≠” is displayed for frames with DPOF settings
and they cannot be erased (➡ P.74).
●! If the “– ” message appears, you
cannot erase the frame. Use the camera on which
the frame was protected to unprotect the frame.
30 ●! Press the “BACK” button to cancel frame erasing.
To continue erasing images, repeat the
procedure from step 3 .
31
3
Advanced Features
Photography
ADVANCED FEATURES PHOTOGRAPHY
The “Advanced Features Photography” section introduces a range of camera functions that you can
access by setting the Mode switch to “q” or “e”.
■ Photography mode specifications
Mode switch
q Still image
e Movie
Photography mode Accessible menu settings
1 AUTO (➡P.32)
This is the easiest mode
for taking pictures and can
be used in a wide range of
conditions.
2 MANUAL (➡P.32)
This mode allows you to
set the “EV” and “White
balance” settings.
e Movie (➡P.41)
In this mode, you can
shoot up to 20 seconds of
video at a time.
y Flash (➡P.34)
l Self-timer (➡P.37)
y Flash (➡P.34)
a EV (Exposure Compensation)
(➡P.39)
s White balance (Selecting the
Light Source) (➡P.40)
Factory
default
AUTO
OFF
AUTO
0
AUTO
— —
Shared menu
settings
dOPTION
✽ See P.52 for
more information
on each of the
settings.
3