User Manual
User Manual
User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
19<br />
Touch Control Panel Operation- continued:<br />
Specific features<br />
Your cooker hood’s electronic system is equipped with special functions<br />
designed to facilitate maintenance and correct utilisation.<br />
Metal filters cleaning required warning<br />
Every 30 hours of utilisation the microprocessor warns the user, by<br />
means of a pulsing “A” on the display, that it is time to clean the anti-<br />
grease metal filters. Cleaning the filters will guarantee better ducting<br />
performance and improved hygiene. To delete this prompt, once the<br />
filters have been cleaned and with the cooker hood off (not powered),<br />
hold buttons 2 and 3 pressed for more than 4 seconds: on the screen<br />
the number “8” will be displayed, it will disappear after 4 seconds.<br />
The microprocessor will reset the filters’s cleaning clock and begin the<br />
countdown to the next prompt.<br />
Carbon filters cleaning warning (only if mounted)<br />
If your cooker hood utilises the re-circulation air filtering system, and<br />
therefore is equipped with active carbon filters to purify the recirculated<br />
air, it is necessary to set the Cooker hood controls<br />
accordingly. While the hood is not in operation, hold button 3 for more<br />
than 4 seconds. On the screen will be displayed the symbol “-” (this<br />
means that the hood, for the time being, is not utilising the carbon<br />
filter), this symbol will be replaced after 4 seconds by the letter “C”<br />
(this means that the hood is now using the Carbon Filter).<br />
From now on the microprocessor will prompt for “Carbon<br />
Filters cleaning required” every 120 hours of utilisation by displaying a<br />
pulsing “C” on the screen. Cleaning the filter will guarantee better<br />
ducting performance and improved hygiene. To delete this prompt,<br />
once the filters have been replaced and with the cooker hood off (not<br />
powered), hold buttons no. 1 and no.3 pressed for more than 4<br />
seconds: on the screen will be displayed the number “8”, it will<br />
disappear after 4 seconds hence the microprocessor will reset the<br />
filter’s cleaning clock and begin to count the 120 hours to the next<br />
prompt for filters cleaning.
Change language