Body Builders Info FUSO HD EURO V FPFVFSNZ PART 10.4 10.10 ...
Body Builders Info FUSO HD EURO V FPFVFSNZ PART 10.4 10.10 ...
Body Builders Info FUSO HD EURO V FPFVFSNZ PART 10.4 10.10 ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10 Technical data<br />
Maximum permissible mass moments of inertia<br />
i<br />
Engine<br />
Table values are applicable only with key data for the<br />
released clutch A 906 250 00 01 or A 444 250 00 01<br />
Attachment with elastic clutch (variant 3)<br />
• Clutch A 444 250 00 01<br />
10.9 Power take-offs<br />
note:<br />
1) Both flexible clutches must be arranged on unit side<br />
2) When the power take-off is running at full capacity, the engine’s speed must not fall below 1200 rpm.<br />
PTO Gear drive<br />
Variant 1 Variant 2 Variant 3<br />
A (kgm 2 ) B (kgm 2 ) C (kgm 2 )<br />
Rotational direction and transmission ratios (looking at the flywheel)<br />
D (kgm 2 )<br />
D1 D2<br />
Definition of the transmission ratio: i = N driving / N driven (over engine speed)<br />
or i = Z driven / Z driving (over the number of teeth)<br />
E (kgm 2 )<br />
OM 457 0.01 0.01 0.026 0.014 0.034 0.11<br />
MITSUBISHI <strong>FUSO</strong> body/equipment mounting directives for FP.FV.FS Issue date: 16. 01. 2013<br />
! Only print out complete sections from the current version<br />
346