ProtectION+ leaflet - Saint-Gobain Performance Plastics Foams

More documents

Recommendations

Info

inTerface maTerial Technology... Cushioning Protect the performance and improve the operating life of pouch cells. PF40 : Micro-cellular Polyurethane Foam SF50 : Silicone Foam Li-Ion Pouch Cell Battery Module Cooling Plate Aluminum Heat Sink Li-Ion Pouch Cell Thermal Management Protect modules and packs against electrical shorts and overheating with our Dual-Purpose Layer solutions. DPL 1.0 : Silicone coated fabric DPL 1.3 : Solid silicone rubber DPL 1.6 & DPL 3.0 : Silicone gap filler Multi-Purpose Protect cylindrical cells, modules and packs against electrical shorts, overheating and vibration with our unique, multi-purpose sponge. MPS : Multi-Purpose silicone Sponge Sealing Protect battery packs from external environment hazards. DYNAFOAM 7440FC : Automated Foam-In-Place gasket SF12 : Silicone Foam gasket Battery Case Top Battery Case Bottom Thermal Insulation Protect battery packs from external temperature variations. HPI 40.0 : High-<strong>Performance</strong> Insulation moulded composite fibers SF12 : Silicone Foam
Cushioning PROTECT the performance and improve the operating life of pouch cells. Properties and Benefits : PF40 and SF50 ensure a stable Compression Force Deflection (CFD) over a wide range of compression rate (%), which makes it possible to compensate for battery cells’ expansion and design tolerances. Over battery’s lifetime the foams maintain their properties (very low Compression-Set and high Resiliency), even under extreme conditions of temperature and compressive force. With those properties, they are able to maintain an optimal range of pressure on cells and maintain thermal contact between cells and heat sink. Moreover, PF40 and SF50 protect your cells against shocks and vibrations, increasing the battery pack safety. They are standard products whose properties (like CFD behavior) can be adapted to your design and technical requirements. If you need a flame retardant interface, SF50 is listed UL94 V0. Thermal Management PROTECT batteries against overheating and electrical shorts. Properties and Benefits: Our DPL solutions offer a wide range of Thermal Interface Materials (TIM), ranging from very soft gap pads to firm silicone rubbers to coated fabrics. DPL products offer an excellent thermal conductivity, ranging from 1.0 to 3.0 W/mK, according to ASTM D5470 and ASTM E1530. They thus enhance interface heat transfer and aid battery to cool down. Moreover, they are able to homogenize temperatures across the cells and hence improve battery life time. In addition to this, DPL products offer an outstanding electrical isolation (greater than 5 kV/mm), which makes it possible to protect your cells against any electrical short hazards, improving greatly the battery pack safety. DPL products are all flame retardant, most of them being UL94 V-0. To better meet your needs, they are also offered with reinforcement options. Products : PF40 : Micro-cellular Polyurethane Foam SF50 : Silicone Foam Li-Ion Pouch Cell Battery Module Cooling Plate Aluminum Heat Sink Li-Ion Pouch Cell Products : DPL 1.0 : Silicone coated fabric DPL 1.3 : Solid silicone rubber DPL 1.6 & DPL 3.0 : Silicone gap filler
Page 1: Thermal, elecTrical & mechanical Pr
Page 5 and 6: ProducT daTa charT UL Listing Avail

ProtectION+ leaflet - Saint-Gobain Performance Plastics Foams

Create successful ePaper yourself

Delete template?

Save as template?