Layer 2-7 High Availability Deployment Guide - Force10 Networks
Layer 2-7 High Availability Deployment Guide - Force10 Networks
Layer 2-7 High Availability Deployment Guide - Force10 Networks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix C - Helpful NetScaler CLI<br />
Commands<br />
The NetScaler Application switch can also be managed and configured via CLI Commands, by connecting to the Serial port or a SSH<br />
connection to the NSIP. The following commands can be used in lieu of the NetScaler GUI for operations detailed in this deployment guide.<br />
> nsconfig (configns)<br />
> show rpcnodes<br />
> set rpcnode -password <br />
> disable interface <br />
> set interface -hamonitor OFF<br />
> add node <br />
> set node -hastatus STAYSECONDARY<br />
> set node -hastatus ENABLE<br />
> show node<br />
> force HA sync<br />
> force HA failover<br />
> set ha node –hasync DISABLE<br />
> set ha node –hasync ENABLE<br />
> show ip<br />
> show interface<br />
28
Change language