sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Residential & Commercial Applications<br />
APPLICATION<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
PROTECTING ROOF ENTRY—<br />
PROTECTING HINGED SKYLIGHTS<br />
Protecting against unwanted intrusion through a hinged skylight using surfacemount<br />
magnetic contacts.<br />
Select location for switch and magnet on side opposite the hinges. Mount switch<br />
on frame and magnet on skylight. Observe gap distance tolerances. You may have<br />
to use spacers to achieve proper alignment.<br />
If skylight has steel frame, gap distance is generally reduced by half. In this case,<br />
use wide gap switches. Mount switch and magnet so Sentrol logo on both reads in<br />
the same direction (switch is polarity sensitive).<br />
Test for proper operation.<br />
1032, 1035, 1085, 1145, 1032W, 1035W, 1085W, 1085TW, 1085T<br />
Magnet<br />
Switch<br />
Hinge<br />
Roof<br />
Figure 1<br />
Magnet<br />
Switch<br />
MAGNETIC CONTACTS<br />
Hinges<br />
WWW.<strong>DIY</strong>ALARMFORUM.COM<br />
Figure 2<br />
3.35
Change language