sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Residential & Commercial Applications<br />
APPLICATION<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
PROTECTING ROOF ENTRY<br />
USING BARRIER BARS ®<br />
Protect against unwanted intrusion through a hinged skylight, attic vents,<br />
basement windows, or any other oddly shaped opening, with pressure switch<br />
activated, spring loaded Barrier Bars.<br />
Barrier Bars can be surface or frame mounted in wired or wireless systems. Springloaded<br />
assembly snaps into place with no screws or drilling. Self-adhesive, epoxybased<br />
switch adheres to brick or cement surfaces, forming a strong, permanent<br />
bond.<br />
Select location for switch so that bar crosses center of opening. Remove adhesive<br />
backing and press switch in place. Run cable to switch and attach to terminals.<br />
Snap bar into place, using spacer for openings wider than 32" (81.3 cm).<br />
Test for proper operation.<br />
BB-1GS Pressure-Sensitive, BB-2 Mercury Tilt Switch, AMB-1 bracket, OVB-1<br />
vertical bars<br />
MAGNETIC CONTACTS<br />
WWW.<strong>DIY</strong>ALARMFORUM.COM<br />
3.37