sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
......................................................................................................................................................................... Introduction<br />
CONTROL SWITCHING<br />
Control Switching Using DPDT Switches<br />
This information describes how to achieve dual switching with one magnetic<br />
contact and one magnet. DPDT magnetic contacts such as the Sentrol 1087D,<br />
1084D, 2507AD, or 2707AD (see catalog) may be used in place of two contacts or<br />
one contact and a floor mat for an annunciator panel. Other applications include<br />
access control multiplex systems, computer monitoring of doors, lighting control<br />
and safety systems. DPDT switches are available in recessed, steel door, surface<br />
and industrial outdoor models.<br />
Note: Each switch is electrically and mechanically isolated from the other and<br />
may switch at a slightly different point.<br />
To <strong>Alarm</strong> System<br />
To Annunciator Panel<br />
or Light or Low<br />
Current Chime<br />
DPDT Switch<br />
Contacts<br />
To <strong>Alarm</strong> System<br />
DPDT Switch<br />
Contacts<br />
To CCTV<br />
To <strong>Alarm</strong> System<br />
Relay Coil<br />
1 Amp Diode<br />
DPDT Switch<br />
Contacts<br />
MAGNETIC CONTACTS<br />
Relay Contacts<br />
To 110V Lights,<br />
Horn or High<br />
Current Device<br />
To <strong>Alarm</strong> System<br />
DPDT Switch<br />
Contacts<br />
WWW.<strong>DIY</strong>ALARMFORUM.COM<br />
To Computer or<br />
Access Control<br />
System<br />
3.6