sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
sentrol - DIY Alarm Forum
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
.........................................................................................................................................................................<br />
Residential & Commercial Applications<br />
APPLICATION<br />
INSTALLATION<br />
RECOMMENDED<br />
PRODUCTS<br />
PROTECTING PAINTINGS AND<br />
OTHER HANGING ART OBJECTS<br />
Paintings and other hanging works of art can be protected with surface or<br />
recessed-mount wide gap switches.<br />
Inspect frame for area to place magnet and switch.<br />
For surface mount, attach magnet to frame as in Figure 1.<br />
Install switch on wall behind magnet.<br />
For recessed mount, install switch in wall at right angles to magnet, forming an<br />
“L” with the switch and magnet as in Figure 2.<br />
Wire into 24-hour loop, if available, to provide protection even if the perimeter<br />
loop is off.<br />
Note: Use wide gap switches if gap is more than 1/2" (1.27 cm).<br />
1035W, 1145W, 1275W<br />
Figure 1.<br />
Surface Installation<br />
MAGNETIC CONTACTS<br />
WWW.<strong>DIY</strong>ALARMFORUM.COM<br />
Figure 2.<br />
Recessed Installation<br />
3.44