Weinig Tools

Normal clamping
3. Use two angled Allen keys (3) with shank to clamp
the V-ledge and tighten the clamping screws
simultaneously. Torque screws down to 25 Nm.
Never tension the complete cutter groove in
one operation, otherwise the tool could
become deformed.
Do not use damaged Allen keys or keys on
which the hexagon head has become round,
as this may result in damage to the clamping
screws.
3.2.5 Technical data
– Tool body of high-strength steel or aluminium
– Fitted with 2 or 4 straight reversible cutters
– Optionally fitted with HSS or carbide
– Positive, form-fitting clamping of the cutters
– Hardened clamping ledges with ground clamping
area
– Cutting angle: 12° / 27° / 35°
– Cutter cutting circle dia. 125 or 140 mm
– Max. speed n = 9,000 rpm
Subject to change without notice!
3 3
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG AG Weinig Tools 3-5
DOKW0056