Weinig Tools
Weinig Tools
Weinig Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety<br />
1.3.1 Hydraulic tools<br />
Hydraulic tools may only be clamped on the mounting arbor or spindle.<br />
The clamping pressure (300 bar) on the hydro cutterhead and on the outboard bearing,<br />
if applicable, must be checked daily with the aid of a high-pressure grease gun before<br />
starting up the machine.<br />
A safety collar must be used on the spindle.<br />
The safety collars must not clamp the tool in axial direction. It must be clamped via the<br />
hydraulic sleeves (300 bar).<br />
The permissible clamping length must be taken into account when clamping hydraulic<br />
tools on spindles without outboard bearing (see operating manual for the planer).<br />
Further information on accident prevention is available on request from your employers'<br />
liability insurance association. Please request this information.<br />
This operating manual must be read through completely by every authorized user before<br />
working with <strong>Weinig</strong> tools. This must be confirmed in writing.<br />
The Instruction Manual has been read and thoroughly understood.<br />
Date: Signature:<br />
Owner ................................ .......................................................<br />
Operating personnel ................................ .......................................................<br />
................................ .......................................................<br />
................................ .......................................................<br />
................................ .......................................................<br />
Important:<br />
This manual must be retained for future reference!<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG AG <strong>Weinig</strong> <strong>Tools</strong> 1-9