Weinig Tools
Weinig Tools
Weinig Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Normal clamping<br />
3.4.6 Removing and fitting the cutters<br />
Removal:<br />
1. Clean the clamping screws in the cutterhead before<br />
removing the cutters.<br />
2. Undo the clamping screws on the cutterhead,<br />
working from the outside inwards.<br />
Planing knives have compression springs<br />
behind the cutters which press the cutter<br />
upwards.<br />
Care must be taken when undoing the last<br />
clamping screw, as the planing knife (1) may<br />
suddenly spring up out of the mount.<br />
3. Press against the planing knife with a piece of hard<br />
wood (2) when undoing the last clamping screw.<br />
4. Remove the cutter and clamping ledge.<br />
Tech. Dok. / WNW 850 02 / 02.2005.A / © MICHAEL WEINIG AG <strong>Weinig</strong> <strong>Tools</strong> 3-13<br />
2<br />
1<br />
DOKW0036
Change language