IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EXTFIELD-ON-DEMAND FANCTION<br />
Frame-on-demand refer to a function for picking up rapidly moving objects by applying a trigger pulse input at a<br />
desired timing to provide a desired or a fixed exposure time. The function is effective since the object is always<br />
taken at the same position in the picture.<br />
FIXFixed<br />
When a single trigger pulse (TRIG-A) is applied, exposure starts at the pulse rising edge. The exposure<br />
time is fixed (1/100(NTSC) ,1/60(PAL) to 1/2000) and set by the L or R button.<br />
The video output is obtained immediately after exposure ends.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
SHORT When a single trigger pulse (TRIG-A) is applied, exposure starts at the pulse rising edge<br />
and ends at the falling edge. One filed of the picture is obtained immediately at vertical reset. The pulse<br />
width determines the exposure time.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
LONG When a single trigger pulse (TRIG-A) is applied, exposure starts at the pulse rising edge and<br />
ends at the falling edge. At the FRM CCD mode setting, one frame of the picture is obtained immediately<br />
at vertical sync reset. The pulse width determines the exposure time.<br />
At the FLD CCD mode setting, operation is the same as the Short mode.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
(Note) Wite an increase in store time , the degree of characterristic pattern noise , white scratch , etc.<br />
14