IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R GAINR gain level setting<br />
The allowable setting range is -128 to 127.<br />
Pressing the R button increases a numeric value to make the R video signal gain higher. Pressing<br />
the L button decreases a numeric value to lower the R video signal gain. For 0 (zero) setting, hold<br />
down both the L and R buttons for approx. two seconds.<br />
B GAINB gain level setting<br />
The allowable setting range is -128 to 127.<br />
Pressing the R button increases a numeric value to make the B video signal gain higher. Pressing<br />
the L button decreases a numeric value to lower the B video signal gain. For 0 (zero) setting, hold<br />
down both the L and R buttons for approx. two seconds.<br />
(Note) CAM MODE In case of AUTO, numeric values of R BLK, B BLK, R GAIN and B GAIN<br />
become ineffective.<br />
WHITE BAL In case of AUTO, numeric values of R GAIN and B GAIN become ineffective.<br />
INITIALIZE<br />
Red and blue gain settings are initialized for each application. Simultaneously press the L and R<br />
buttons for about 2 seconds to return the selected files to the factory settings. See Page 24 for the<br />
factory settings of each application file.<br />
10. MASKING<br />
Menu for setting the masking.<br />
<br />
R HUE: Change red color phase<br />
<br />
<br />
Y HUE: Change yellow color phase<br />
<br />
<br />
G HUE: Change green color phase<br />
<br />
<br />
C HUE: Change cyan color phase<br />
<br />
B HUE: Change blue color phase<br />
<br />
<br />
<br />
M HUE: Change magenta color phase<br />
<br />
<br />
The above items can be set in the range of -32 to +31. Respectively <br />
<br />
press the R button to increase and the L button to decrease the vector<br />
color hue as indicated in the figure. Each item can be set to 0 by<br />
simultaneously pressing the L and R buttons for about 2 seconds.<br />
R SAT: Increase red color level<br />
Y SAT: Increase yellow color level<br />
G SAT: Increase green color level<br />
10C SAT: Increase cyan color level<br />
11B SAT: Increase blue color level<br />
12M SAT: Increase magenta color level<br />
The above items can be set in the range of -32 to +31. Respectively press the R button to increase and<br />
the L button to decrease the color level. Each item can be set to 0 by simultaneously pressing the L<br />
and R buttons for about 2 seconds.<br />
14