CATALOGUE 2010/11 - Grundmann Beschlagtechnik GmbH
CATALOGUE 2010/11 - Grundmann Beschlagtechnik GmbH
CATALOGUE 2010/11 - Grundmann Beschlagtechnik GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CATALOGUE</strong><br />
<strong>2010</strong>/<strong>11</strong><br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
<strong>Grundmann</strong> | Introduction 1
PRODUCTS<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
2 <strong>Grundmann</strong> | Introduction<br />
on
GEOS and WG4 Fittings for Public<br />
and Commercial Sectors<br />
explanations, technical support<br />
fitting series with matching window pulls<br />
knobs<br />
36<br />
38<br />
46<br />
66<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
BUILDINGS<br />
GEOS and WG4-Fittings<br />
for Tubular Frame Doors<br />
fitting series including series «Z»<br />
GEOS-knobs<br />
69<br />
70<br />
85<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
Contact<br />
4<br />
WG-Fittings for House and Home<br />
explanations<br />
WG-models 500 - 18000<br />
knobs<br />
roses, backplates<br />
87<br />
88<br />
90<br />
124<br />
126<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
News<br />
6<br />
MYDESIGN – custom<br />
desires become true<br />
Our seven principles<br />
Fittings Introduction<br />
8<br />
10<br />
26<br />
Anti-burglary Fittings<br />
explanations<br />
anti-burglary series WK 1-4<br />
knobs for anti-burglary series<br />
131<br />
132<br />
134<br />
152<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Supplementary Products<br />
155<br />
fittings for glass doors<br />
for handicapped people<br />
name plates<br />
doors stops, wardrobe hooks<br />
156<br />
157<br />
158<br />
160<br />
162<br />
SUPPLE-<br />
MENTARY<br />
PRODUCTS<br />
GEOS-locks and WG-Locks<br />
explanations<br />
series 300 and 400<br />
special locks and strike plates<br />
167<br />
168<br />
176<br />
180<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
Anti-burglary Locks<br />
series 421E(F)Rand 451(F)<br />
strike plates and hinge guards<br />
multi-point lock MVS 900<br />
187<br />
188<br />
190<br />
192<br />
ANTI-<br />
BURGLARY<br />
LOCKS<br />
Transponder Access Control – TAC<br />
Innovation opens uo new worlds<br />
234<br />
236<br />
TAC<br />
ACCESS<br />
CONTROL<br />
3
Distributing Agents<br />
Austria<br />
WIEN | NIEDERÖSTERREICH | BURGENLAND<br />
Alexander Nekam<br />
Mobile: +43.664.39 49 048<br />
Fax: +43.2764.2202-168<br />
nekam@grundmann.com<br />
Karl Hager<br />
Mobile: +43.664.443 79 17<br />
Fax: +43.2764.2202-169<br />
hager@grundmann.com<br />
Andreas Lipp<br />
Mobile: +43.664.968 24 25<br />
Fax: +43.2764.2202-401<br />
lipp@grundmann.com<br />
STEIERMARK | KÄRNTEN | OSTTIROL<br />
Helmut Deutsch<br />
Phone: +43 3136.55 472<br />
Fax: +43 3136.55 472<br />
Mobile: +43.664.44 53 999<br />
deutsch.h@aon.at<br />
OBERÖSTERREICH<br />
Josef Fischer<br />
Mobile: +43.664.443 76 48<br />
fischer@grundmann.com<br />
SALZBURG | TIROL | VORARLBERG<br />
Wolfgang Gradenegger<br />
Mobile: +43.664.24 09 413<br />
Fax: +43.0662.6270 2710<br />
wolfgang@gradenegger.at<br />
Product management and<br />
advice Transponder Access Control (TAC)<br />
Thomas Müllner<br />
Phone.: +43.2764.2202-178<br />
Mobile: +43.664.25 04 562<br />
t.muellner@grundmann.com<br />
Distributing Agents<br />
Export<br />
GERMANY<br />
POSTCODE-REGION 80 – 85, 86000 – 86709,<br />
86800 – 86989, 87, 89300 – 89449,<br />
94000 – 94169, 94400 – 94579<br />
Gerhard Fuchs<br />
82166 Gräfelfing, Würmstr. 7a<br />
Phone: +49.89-85 2471<br />
Fax: +49.89-85 41355<br />
Mobile: 0171-6257252<br />
Objektberatung.GerhardFuchs@gmx.net<br />
POSTCODE-REGION 86710 – 86759,<br />
90 – 93, 94200 – 94379, 95 – 97<br />
Manfred Eckl<br />
90530 Wendelstein, Carl-Orff-Ring 33<br />
Phone: +49.9129-27 9060<br />
Fax: +49.9129-27 9061<br />
Mobile: +49.171-21 57584<br />
Manfred.Eckl@t-online.de<br />
POSTCODE-REGION 1–09,<br />
except for 06<br />
Gerthold Thalheim<br />
09599 Freiberg,<br />
Franz-Kögler-Ring 32<br />
Phone: +49.3731.724 94<br />
Fax: +49.3222.1484440<br />
Mobile: +49.162.270 6643<br />
beschlagstechnik@netkabel.de<br />
POSTCODE-REGION 06000-06999, 38800-<br />
38999, 39000-39999<br />
Jens Hostmann<br />
39<strong>11</strong>4 Magdeburg,<br />
Schlossstraße 22<br />
Phone: +49.3928-464 727<br />
Fax: +49.3928-464 728<br />
Mobile: +49.171-777 22 80<br />
hostmann-handelsvertretung@web.de<br />
POSTCODE-REGION 21600-21749, 26000-<br />
26969, 27200-27809, 28700-28879,48400-<br />
48539, 49000-49849:<br />
Gärtner Handelsvertretung<br />
26131 Oldenburg, Hundsmühler Str. 107a<br />
Phone: +49.441-500 8760<br />
Fax: +49.441-500 8761<br />
Mobile: +49-171 413 10 94<br />
info@hv-gaertner.de<br />
POSTCODE-REGION 40000 – 48399:<br />
BSX-Bauservice UG<br />
Handelsvertretung Weyermann<br />
Kriemhildstr. <strong>11</strong><br />
46509 Xanten<br />
Phone: +49.2801-986923<br />
Fax: +49.2801-986924<br />
E-Mail: weyermann@grundmann.com<br />
LIECHTENSTEIN | SOUTH TYROL<br />
Wolfgang Gradenegger<br />
Mobile: +43.664.24 09 413<br />
Fax: +43.0662.6270 2710<br />
wolfgang@gradenegger.at<br />
CROATIA | MACEDONIA | SLOVENIA<br />
Helmut Deutsch<br />
8141 Unterpremstätten, Kochn-Weg 3/3<br />
Phone: +43.3136.55 472<br />
Fax: +43.3136.55 472<br />
Mobile: +43.664.44 53 999<br />
deutsch.h@aon.at<br />
NETHERLANDS, BELGIUM<br />
CK Design<br />
73<strong>11</strong> AM Apeldoorn NL,<br />
Professor Röntgenstraat 8-4A<br />
Phone: +31-55-578 92 88<br />
Fax: +31-55 576 0805<br />
info@ck-design.nl<br />
www.ckdesign.nl<br />
USA<br />
<strong>Grundmann</strong> America<br />
Lauren Serebrenik<br />
NY 10013, <strong>11</strong>0 Reade Street, Floor 2<br />
New York, U.S.A.<br />
Phone: +01.212-7314933<br />
E-Mail: Lauren@grundmannamerica.com<br />
www.<strong>Grundmann</strong>america.com<br />
4 <strong>Grundmann</strong> | Introduction
<strong>Grundmann</strong> <strong>Beschlagtechnik</strong> <strong>GmbH</strong><br />
3170 Hainfeld | Austria<br />
T +43.2764.22 02 - Serie<br />
F +43.2764.22 02 DW 160<br />
E-Mail: beschlaege@grundmann.com<br />
www.grundmann.com<br />
Price catalogue <strong>2010</strong><br />
valdid from 01.04.<strong>2010</strong><br />
until the next general markup<br />
no cartel prices<br />
calculated for the resail<br />
Management<br />
Mag. Lilly Gaschler DW <strong>11</strong>9<br />
Management and Sales<br />
DI Klaus Sommeregger DW 120<br />
Sales Austria<br />
Christian Engleitner DW 121<br />
Kornelia Kerschner DW 231<br />
Helga Lemmerer DW 123<br />
Günter Siegl DW 128<br />
Sales Transponder Access Control (TAC)<br />
Doris Hintermayer DW 232<br />
Beatrix Kapeller DW 124<br />
Export<br />
Friederike Gramm DW 131<br />
Technical advice<br />
Ing. Reinhold Hofmann DW 173<br />
Bank account<br />
Bank Austria Creditanstalt AG, St. Pölten,<br />
Kto.Nr. 323133<strong>11</strong>100, BLZ 12000<br />
IBAN AT 12 1200 0323 1331 <strong>11</strong>00<br />
BIC BKAUATWW<br />
Sparkasse Niederösterreich Mitte West AG,<br />
Kto.Nr. 07700014215, BLZ 20256<br />
IBAN AT02 2025 6077 0001 4215<br />
S.W.I.F.T (BIC) SPSPAT21<br />
Linz<br />
St. Pölten<br />
Wien<br />
Salzburg<br />
Hainfeld<br />
Graz<br />
Linz<br />
Passau<br />
Salzburg<br />
München<br />
St. Pölten<br />
B20<br />
Traisen Rohrbach<br />
an der Gölsen<br />
Ob der Kirche<br />
Hainfeld<br />
B19<br />
Altlengbach<br />
B18<br />
B<strong>11</strong><br />
Wien/Auhof<br />
A1<br />
A21<br />
Mayerling<br />
A2<br />
Wien<br />
Knoten Vösendorf<br />
Leobersdorf<br />
Graz<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
<strong>Grundmann</strong> | Introduction 5
News <strong>2010</strong>/<strong>11</strong><br />
Our company is increasingly becoming<br />
specialists for commercial<br />
and security areas. This trend is<br />
also readable in the catalogue<br />
<strong>2010</strong>/<strong>11</strong>.<br />
The GEOS brand has enhanced<br />
its high quality, while the new WG4<br />
commercial bearing is positioned<br />
as the low-priced alternative to it.<br />
The new locks and fittings range<br />
for emergency exit doors brings yet<br />
more expertises to the commercial<br />
area. And all these product groups<br />
can be combined with the TAC<br />
locking system.<br />
New bearings<br />
In the product section of each model,<br />
you will find reference to the two<br />
commercial bearings, which essentially<br />
differ first of all in terms of the load<br />
capacities and the guarantee period<br />
assured by us. In the price section you<br />
will find GEOS and WG4 clearly separated<br />
– in own lists for solid or tubular<br />
frame doors.<br />
Short plates in reinforced<br />
commercial finish<br />
All GEOS and WG4 short plates are<br />
now equipped with an M5 screw fitting,<br />
which is specially suitable for<br />
the pinch screws of panic bars.<br />
6 <strong>Grundmann</strong> | Introduction<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
Range for emergency<br />
exit doors<br />
In the price pages,<br />
we also point out the<br />
combination possibilities<br />
of our new product<br />
range for emergency<br />
exit doors. If<br />
you want more details, we'll be glad to<br />
send you the appropriate catalogue.<br />
TAC now speaks a second<br />
language: Mifare®<br />
Beside the already renowned and<br />
well-established Legic® system, we<br />
can now offer a second contactless<br />
transponder technology. Mifare® is<br />
combined with TAC mortise locks<br />
and is as comfortable and conforming<br />
to standards as the first<br />
system.<br />
Safe and well shaped<br />
The ZA3 series fills a gap in our<br />
wide range of burglar-proof series.<br />
This fitting with a 15-mm high protection<br />
plate and a massive carrier<br />
plate fulfils the requirements of the<br />
resistance class 3 of the ÖNORM<br />
B 5351 (Austrian standard) and is<br />
available with or without the plug<br />
protection plate.<br />
Alt-Wien' model door fittings<br />
in brass-PVD<br />
All 'Alt-Wien' 900 model interior<br />
door fittings according to ÖNORM<br />
are now supplied with the abrasion-<br />
and corrosion-resistant MS-<br />
PVD surface as standard instead<br />
of the MS finish. So far all strongly<br />
stressed parts like house doors and<br />
burglar-proof doors of the ZAL/ZEL<br />
series were already manufactured<br />
with this finish.<br />
Conversion of the lock surfaces:<br />
from GP to VZ<br />
Due to the harmful effects of Cr (VI)<br />
compounds in the galvanic surface<br />
treatment on health, all lock series,<br />
the corresponding locking plates<br />
as well as the insertion rods and<br />
window pulls from the window product<br />
range, are converted from GP<br />
surface to blue galvanised (VZ) and/<br />
or Niro Look (NL) in a smooth transitional<br />
period.<br />
This conversion is a significant<br />
contribution to the protection of<br />
environment and workplace safety.<br />
This surface will not be<br />
delivered any more: GP<br />
As series<br />
from now on: VZ
The new lock for glass doors series 300GT<br />
is part of our programm <strong>2010</strong>, as well.<br />
<strong>Grundmann</strong> n | Introduction on<br />
7
Your imagination – our experience: MYDESIGN made by <strong>Grundmann</strong><br />
Do you have an idea, a design<br />
already drafted, or would you simply<br />
like to have a lever handle design<br />
for your special building, that<br />
exclusively matches your theme?<br />
Now the opportunity of implementing<br />
your own ideas in a personal<br />
model is available to you. In coordination<br />
with our MYDESIGN team<br />
your ideas and our experience will<br />
be shaped into a tangible whole. As<br />
part of the new MYDESIGN product<br />
line, individual fittings are produced<br />
at reasonable costs – with delivery<br />
time of six weeks after all details have<br />
been clarified.<br />
6 steps to a new design:<br />
1. You explain your desires to us. If<br />
available, sketches or 3D files can<br />
be discussed. On request we will<br />
integrate a project designer in the<br />
project team.<br />
2. Working out the technical implementation<br />
and execution in accordance<br />
with standards.<br />
3. Presentation of the solution and<br />
submission of proposal.<br />
4. Production of a hand-made<br />
sample<br />
5. Specification of the final model<br />
6. Order is placed with delivery<br />
schedule confirmation<br />
8 <strong>Grundmann</strong> | Introduction
<strong>Grundmann</strong> n |In<br />
Introduction ti<br />
on<br />
9
If you have decided on a product in our current<br />
catalog, you also buy various «Soft Facts» with<br />
it like quality, delivery time and service. Two products<br />
that look the same need not be equals by<br />
a long way.<br />
From the following pages you‘ll come to know<br />
about the invisible product qualities of our company.<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
10 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
1. The three-day production time<br />
2. Service<br />
3. Custom-tailored solutions<br />
4. Certificates, standards<br />
5. Quality brands GEOS, WG,<br />
WG4 and TAC<br />
6. Core competence functional<br />
Design<br />
7. Quality «made in Austria»<br />
12<br />
14<br />
16<br />
18<br />
20<br />
22<br />
24<br />
<strong>Grundmann</strong> | Introduction <strong>11</strong>
The «three-day production time» has proved<br />
itself.<br />
Our production system with the concept - to<br />
dispatch the goods from the factory 3 days after<br />
receipt of the order - «goes like clockwork» and<br />
offers every customer quick access to the major<br />
part of our products.<br />
95% of all articles listed in the catalog can be produced<br />
within 3 workdays. Some particularly workintensive<br />
products or models still require a little<br />
more time are identified with an x in the catalog<br />
(e.g. the E-POL model). For special requirements<br />
we will specify the delivery time on request - these<br />
products are identified in the catalog with a 3.<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
12 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
1.<strong>Grundmann</strong> manufactures<br />
within<br />
three days.<br />
<strong>Grundmann</strong> | Introduction 7 Prinzipien principles 13
Our service is exemplary, a fact that is confirmed<br />
to us again and again.<br />
For us service means making things as easy as possible<br />
for you, ensuring a smooth procedure for you,<br />
and delivering products to you that represent the<br />
highest level of quality.<br />
Therefore we constantly strive to further improve<br />
our service; <strong>Grundmann</strong> team spirit plays a significant<br />
role in this regard. Our service concept rests<br />
on 3 pillars:<br />
· Extensive information material that offers you a<br />
perfect basis for your work: meaningful, informative,<br />
and clear.<br />
· Your personal <strong>Grundmann</strong> consultant is at your<br />
service throughout Austria and in selected export<br />
markets. He will competently advise you in all<br />
issues concerning opening and closing.<br />
· Also you can benefit from our in-house technical<br />
support (ext. 173) and logistical support<br />
(ext. -131).<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
14 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
2.<strong>Grundmann</strong> offers<br />
optimum service.<br />
<strong>Grundmann</strong> | Introduction 7 principles 15
As a small company, and thus an extremely vital<br />
and flexible company, we can also offer you the<br />
luxury of quick and non-bureaucratic implementation<br />
of unusual concepts.<br />
With the new product line «MYDESIGN» you can<br />
materialize your own notions of opening and closing.<br />
And that too at a reasonable price and interesting<br />
delivery times (see Page 8).<br />
The standard catalog also offers more flexibility<br />
than seems possible by the - already numerous<br />
- ticketed complete sets of fittings. For this reason<br />
we have also listed a number of individual prices<br />
in addition to the prices for complete sets. For all<br />
those who like the special solutions.<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
16 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
3.<strong>Grundmann</strong><br />
offers customtailored<br />
solutions.<br />
<strong>Grundmann</strong> | Introduction 7 principles 17
Internationally the market offers a broad and<br />
diverse range of products. Standards are a<br />
protection for both producers and customers<br />
especially for security related products like antiburglary<br />
fittings or fittings for fireproof doors.<br />
Norms and standards are important instruments<br />
that enable us to guarantee high quality over the<br />
long-term. Consequently we not only adhere<br />
to national and international standards, we also<br />
participate actively in national and international<br />
standards committees, to further optimise these<br />
standards.<br />
You will find detailed information on standards in<br />
this catalog, where each product is appropriately<br />
identified.<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
18 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
4.<strong>Grundmann</strong><br />
sets standards.<br />
<strong>Grundmann</strong> | Introduction 7 principles 19
GEOS, WG4, WG and TAC are our quality trademarks:<br />
In general we offer fittings and locks for<br />
the application areas commercial and residential<br />
building.<br />
The GEOS brand – Commercial building fittings<br />
from door stop to lever handle, EN 1906, use class 4,<br />
the ball bearing handles at least 1.000.000 times of<br />
open-close movements, guarantee period of 5 years<br />
GEOS stands for GEOmetric design and safety<br />
and since its introduction in 1973, has developed<br />
into a synonym for functional and top quality<br />
commercial building fittings. The strengths of the<br />
brand is the top class bearing and the numerous<br />
application potentials of a design - from fire retardant<br />
through anti-panic up to anti-burglary. Besides<br />
the popular round tube models, a variety of freeform<br />
designs of Austrian designers have also been<br />
available for long in the product range.<br />
The WG4 brand – Commercial building fittings,<br />
EN 1906, use class 4, the bearing handles at least<br />
200.000 times of open-close movements, guarantee<br />
period of 2 years<br />
Nearly all GEOS lever handle models are available<br />
with the WG4-bearing, as well.<br />
The WG brand – from the elegant interior door till<br />
the anti-burglary exterior range tested in compliance<br />
with EN 1906 (available in the use classes 2, 3 and 4<br />
according to security requirement).<br />
Residential building fittings from <strong>Grundmann</strong><br />
are offered in 3 groups - Classic, Basic and Home<br />
Office. So you find fittings like the legendary model<br />
Elegant from the Viennese Wilhelminian period and<br />
also the designs of contemporary designers like<br />
Gottfried Palatin, Michael Schaefer or Wolfgang<br />
Hints.<br />
For the protection of the entrance area, several<br />
anti-burglary series are available and can of course<br />
be combined with all handle shapes. This flexibility<br />
is one of the strongest features of the WG brand.<br />
The TAC brand – stands for Transponder Access<br />
Control, a contactless, battery-operated access control,<br />
packaged in sophisticated design.<br />
TAC was designed and developed mainly for the<br />
office and hotel sector and so is the ideal supplement<br />
to the commercial building fittings.<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
20 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
5.<strong>Grundmann</strong><br />
stands for the<br />
quality brands<br />
GEOS, WG4, WG<br />
and TAC.<br />
<strong>Grundmann</strong> | Introduction 7 principles 21
The opportunity to participate in shaping part of<br />
our daily culture is both natural for a manufacturer<br />
of fittings and it is also a challenge. This is<br />
why <strong>Grundmann</strong> has cultivated a long-standing<br />
tradition of close collaboration with designers.<br />
A look at the past: Between 1950 and 1970 Ernst<br />
Oskwarek was responsible for graphics and product<br />
design as <strong>Grundmann</strong>‘s creative all-round genius.<br />
In 1957 he designed the Favorit model that became<br />
the bestseller of the following decade. Ernst Oskwarek<br />
also participated in the development of our commercial<br />
building GEOS product line.<br />
In 1966, Count Sigvard Bernadotte, the long-time<br />
owner of the largest design firms in Copenhagen<br />
and Stockholm, a top designer in today‘s parlance,<br />
designed the models Kungsholm and Gripsholm.<br />
This design convinces us even today, which is<br />
stamped by the formal reduction of Scandinavian<br />
modernity.<br />
Since the early 90‘s we have built up a new product<br />
line in collaboration with Austrian designers.<br />
It has always been our declared goal to introduce<br />
fittings to the market that are not trendy but rather<br />
modern, in the sense of sustainable formal quality.<br />
Not all of these designs are still listet in our catalogue,<br />
nevertheless we are still proud about these<br />
cooperations.<br />
Stefan Zinell for example: he designed a contemporary<br />
interpretation of a rustic fitting: His redefinition<br />
of the term «rustic», which does not remain in<br />
retro design, but rather establishes intelligent references<br />
to the traditions of our daily culture.<br />
The fruitful collaboration with the Vienna designer<br />
Michael Schaefer commenced in 1991. Among<br />
other things he designed the Servus model for us,<br />
which was awarded the coveted iF design prize. He<br />
also designed the TAC-rose, which attracts a lot of<br />
interest.<br />
Gottfried Palatin, another Austrian designer, inspired<br />
us with new forms and the high art of traditional<br />
handcraft: The lever handles Palatin and 1500<br />
GEOS that he modeled nestle formally in the hand<br />
in their harmonious workmanship. His designs have<br />
also won awards.<br />
Wolfgang Hints created among others the<br />
models Lilly, Sissy and Felix for the basic group. In<br />
the process he had to survive the difficult tightrope<br />
walk to find generally pleasing shapes and at the<br />
same time to design not highly elaborate, but simply<br />
well-designed everyday products.<br />
We also marked out design areas on every aspect<br />
of the door with Austrian designers. The Viennese<br />
designer and calligrapher Veronika Kyral once designed<br />
a key rack for <strong>Grundmann</strong>.<br />
In the current product range you will find the door<br />
stop 1737 by Michael Schaefer and the wardrobe<br />
hook 6230 designed for our company by the architect<br />
Michael Wagner in the mid 1990s.<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
22 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
6.<strong>Grundmann</strong> and<br />
functional design -<br />
this is our core competence.<br />
<strong>Grundmann</strong> | Introduction 7 principles 23
Today, as in the past the name «Austria» has a<br />
good reputation in international competition.<br />
We are working on keeping it that way. Together<br />
with our staff we have been successful in developing<br />
a company concept that consistently relies on<br />
quality; the quality of the products, the quality of<br />
the design, and the quality of our service offerings.<br />
And to demonstrate how seriously we take our<br />
promises, we offer a quality guarantee of 5 years for<br />
all GEOS products with ball beraing.<br />
We are convinced that this is the right stamp of<br />
quality «made in Austria».<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
24 <strong>Grundmann</strong> | Introduction
7x reliability in the<br />
<strong>Grundmann</strong> context<br />
7.<strong>Grundmann</strong>,<br />
is quality<br />
«made in Austria».<br />
<strong>Grundmann</strong> | Introduction 7 principles 25
26 <strong>Grundmann</strong> | Fittings | Introduction<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong>
Introduction<br />
GEOS and WG4<br />
Fittings for Commercial<br />
and Public Buildings<br />
WG Fittings<br />
for House and Home<br />
Anti-burglary Fittings<br />
Standards<br />
Fire-resistant Fittings<br />
Finishes<br />
Fittings Design – Survey<br />
Materials, Maintenance<br />
Direction Determination<br />
28<br />
29<br />
30<br />
32<br />
34<br />
35<br />
<strong>Grundmann</strong> | Fittings | Introduction 27
Fittings | Standards<br />
Standards for fittings | ÖNORM EN 1906<br />
ÖNORM EN 1906 - Use category<br />
ÖNORM EN 1906 governs the basic requirements for fittings throughout<br />
Europe. In Austria ÖNORM B 5340, which governs dimensions and additional<br />
definitions, has been reworked as an extension.<br />
Use categories of ÖNORM EN 1906<br />
In ÖNORM EN 1906 the load capacity of door fittings is divided into the following<br />
four use categories (cited from the standard text):<br />
Class 1<br />
Average use frequency by persons who are motivated to great care and from<br />
whom a low risk of incorrect application can be assumed, e.g. interior doors<br />
of apartment buildings.<br />
Class 2<br />
Medium use frequency by persons who are motivated to care, however<br />
there is a certain risk of incorrect application, e.g. interior doors in office<br />
buildings.<br />
Class 3<br />
Frequent use by the public or other persons with low motivation for care<br />
and with whom a high risk of incorrect application exists, e.g. doors in office<br />
buildings .<br />
Class 4<br />
For use in doors that are frequently subject to the application of force and<br />
property damage, e.g. soccer stadiums, on oil drilling platforms, in barracks<br />
or public lavatories.<br />
GRUNDMANN fittings are tested in accordance with<br />
ÖNORM EN 1906<br />
GEOS fittings for commercial and<br />
public sector buildings Use category 4<br />
WG4 fittings for commercial and<br />
public sector buildings Use category 4<br />
WG apartment building fittings Use category 2 and 3<br />
Anti-burglary fittings Use category 4<br />
Fire-resistant fittings in accordance with ÖNORM B 3859<br />
must correspond to use category 3 of ÖNORM EN 1906.<br />
An important feature of commercial and public sector fittings is the rotatable<br />
handle suspension with a plate, a rosette or a support construction in<br />
order to better accommodate the tensile load of the handle connection.<br />
Moreover in ÖNORM EN 1906 a test of handle fittings for „tensile load<br />
of special fittings for increased security“ is optionally provided. Our GEOS<br />
fittings for commercial and public sector buildings are tested for increased<br />
security.<br />
Only door handle fittings that satisfy this requirement should be mounted<br />
at points where there is an increased hazard of falling, e.g. for doors at<br />
the top of cellar stairways or other stairways.<br />
In addition this test also provides information as to whether the fitting can<br />
withstand the effects of various forms of vandalism.<br />
In addition to the complete test cycle, the manufacturer voluntarily subjects<br />
the fitting to a tensile test with a force of 2 500 N .<br />
Additional important fitting criteria must be checked against the table<br />
„Main test parameters“ – please compare the table values:<br />
Use class 1 2 3 4<br />
Torque 20 Nm 30 Nm 40 Nm 60 Nm<br />
Tensile load 300 N 500 N 800 N 1 000 N<br />
Fatigue test 100 000 100 000 200 000 200 000<br />
Tensile load* 1 500 N 1 500 N 2 500 N 2 500 N<br />
*) Test exempt, applicable only to special fittings with increased security (e.g. vandalism)<br />
Explanation: Force is specified in N (Newton) – 10 N corresponds to approximately 1 kg.<br />
Torque is specified in Nm (Newton meter) – 20 Nm is the torque that exerts a force of 20 N with a<br />
lever arm at a distance of 1 m from the fulcrum.<br />
28 <strong>Grundmann</strong> | Fittings | Introduction
Fittings | Fire resistant<br />
90min<br />
ÖNORM<br />
B 3859<br />
90min<br />
DIN<br />
18273FS<br />
Fittings standards | ÖNORM B 3859, DIN 18273FS, fire-resistant fittings<br />
Fire-resistant doors are tested in Austria in accordance with ÖNORM EN<br />
1634-1 and ÖNORM B 3850. Fittings that are used on these doors must be<br />
manufactured in a manner that is fire-resistant and that satisfies door standard<br />
ÖNORM B 3850 and ÖNORM B 3859.<br />
In the European fittings standard ÖNORM EN 1906 in the version that was<br />
valid when the catalogue went to press (November 2005) a CE mark and<br />
registration were not yet provided (these are currently being reworked),<br />
consequently for registration, the valid national standards for fire-resistant<br />
fittings apply.<br />
We differentiate the following models for fittings<br />
→ not fire-resistant<br />
→ fire-resistant in accordance with ÖNORM B 3859 with fire-resistant insert<br />
in the plate or rose, however without steel insert in the handle.<br />
→ fire-resistant in accordance with DIN 18273 FS with fire-resistant insert<br />
in the plate or rose and steel insert in the handle (with 9 mm square pin)<br />
Structure of fire-resistant handle fittings<br />
An important characteristic of fire-resistant fittings is the steel insert in the<br />
plate or in the rose, to prevent the door leaf from burning through. This is<br />
also stipulated in the standards ÖNORM B 3859 und DIN 18273FS.<br />
The difference between handle fittings tested in accordance with ÖNORM B<br />
3859 and DIN 18273FS is in the structure of the handle.<br />
Fire-resistant insert<br />
ÖNORM B 3859<br />
For handles made of a material with a melting point less than 1000°C (e.g.<br />
aluminium) a fire-resistant steel insert is not provided. However there must<br />
be a handle connection (= in the form of a steel handle pin) available, which<br />
prevents the door leaf from burning through.<br />
DIN 18273FS<br />
For handles made of a material with a melting point less than 1000°C (e.g.<br />
aluminium) a fire-resistant steel insert must be incorporated.<br />
All fire-resistant fittings are identified in the catalogue, as well as in the<br />
price list with a flame symbol and with a standard designation – „Tested<br />
in accordance with ÖNORM B 3859“ / „Tested in accordance with DIN<br />
18273FS“.<br />
In the article number fire-resistant fittings are identified with the<br />
supplement FH:<br />
1754/D6K/55ZFH – handle fitting tested<br />
in accordance with ÖNORM B 3859<br />
1754FH/D6K/55ZFH – handle fitting tested<br />
in accordance with DIN 18273 FS<br />
Provisional regulation with ÜA mark (Austrian certification for<br />
construction products)<br />
In Austria fire-protection doors are subject to ÜA designation. The ÜA<br />
mark ensures that only tested door elements are used.<br />
Basically all of our fittings that have a flame symbol and the standard<br />
designation ÖNORM B 3859 in the catalogue can be used on doors that have<br />
the ÜA mark.<br />
Please contact your registration authority for questions concerning the<br />
use of our fittings tested in accordance with ÖNORM B 3859 on doors that<br />
are tested in accordance with ÖNORM B 3850.<br />
→ Further informations about «emergency exit doors» you find in the GEOSintroduction.<br />
Rose support construction<br />
Sectional view<br />
Fire-resistant steel insert<br />
in accordance with DIN 18273FS<br />
<strong>Grundmann</strong> | Fittings | Introduction 29
Fittings | Finishes<br />
E-POL E-SAT F1-SAT F2<br />
MS-CR-SAT MS-CR MS/MS-PVD POL<br />
30 <strong>Grundmann</strong> | Fittings | Introduction
Fittings | Powder Coatings<br />
golden yellow (RAL 1004) pale red orange (RAL 2008) ruby red (RAL 3003)<br />
leaf green (RAL 6002) ultramarine blue (RAL 5002) sepia brown (RAL 8014)<br />
greyish white (RAL 9002) pure white (RAL 9010) white-aluminium (RAL 9006)<br />
Colours<br />
Standard RAL colours:<br />
Colour register RAL 841GL or RAL 840HR<br />
(all colour samples are simulated in 4c)<br />
colour samples are available on request.<br />
graphite black (RAL 90<strong>11</strong>) traffic white (RAL 9016)<br />
<strong>Grundmann</strong> | Fittings | Introduction 31
: Fittings for Commercial and Public Sectors<br />
Fittings for Wooden Doors<br />
1554 GEOS 1654 GEOS 1754 GEOS 2154 GEOS<br />
page 46 page 48 page 50 page 52<br />
2254 GEOS 2354 GEOS 2554 GEOS 2554N GEOS<br />
page 54 page 56 page 58 page 60<br />
4654 GEOS 17<br />
page 62<br />
17354 GEOS 17<br />
page 64<br />
Special fittings for tubular frame doors<br />
1554Z GEOS 1754Z GEOS 2354Z GEOS 2454M GEOS<br />
page 71 page 74 page 78 page 79<br />
2554NZ GEOS<br />
4654Z GEOS<br />
page 82 page 84<br />
Knob program<br />
3154a GEOS 3054 GEOS 3254L WG4 3054M GEOS 3154aM GEOS 5664G GEOS<br />
page 66 page 66 page 66 page 85 page 85 page 85<br />
32 <strong>Grundmann</strong> | Fittings | Introduction
: Fittings for House and Home<br />
WG Classic<br />
500 Elegant 600 Standard 900 Alt-Wien 1000 Favorit <strong>11</strong>00 Servus<br />
page 90 page 94 page 98 page 102 page 104<br />
WG Basic<br />
700 Palatin 1700L 2000 18000<br />
page 96 page 108 page <strong>11</strong>0 page 122<br />
7000 Lilly 7200 Sissy 7300 Felix<br />
page <strong>11</strong>6 page <strong>11</strong>8 page 120<br />
<strong>Grundmann</strong> | Fittings | Introduction 33
Fittings | Materials, Maintenance<br />
Aluminium<br />
Aluminum is a light metal and can be cast in moulds or<br />
rolled in sheets to the finest foils.<br />
We offer aluminum fittings in the surfaces, polished<br />
aluminum (POL), as well as in the anodized surfaces,<br />
satined aluminum silver anodized (F1-SAT) and anodized<br />
aluminum German silver (F2).<br />
Polished aluminum<br />
Polished aluminum fittings are ground and then polished<br />
to a high gloss after the casting process, or after<br />
the shaping process in the case of sheets, and we work<br />
with increasingly fine grinding and polishing wheels<br />
to achieve a texture depth that is as low as possible.<br />
The surface becomes smooth and glossy through this<br />
process.<br />
Aluminum surfaces polished to a high gloss form a<br />
natural oxidation coating (matte grey color) after longer<br />
use that protects the surface (except from mechanical<br />
effects).<br />
Anodized aluminum<br />
ELECTROLYTIC OXIDATION of ALUMINIUM<br />
For anodized oxidation of aluminum, also referred to<br />
as the eloxal process, the surface of the aluminum<br />
workpiece is converted to an oxide coating in an electrochemical<br />
process. This coating can be defined in its<br />
thickness and makes products treated in this manner<br />
wear-resistant and resistant to corrosion, which is not<br />
the case with polished aluminum surfaces. In addition<br />
it also allows the possibility of implementing colors (for<br />
our F1-SAT, F2 fittings).<br />
However the surface of aluminum fittings with<br />
polished or anodized surfaces can be mechanically<br />
damaged in daily use by harder materials. Scratches<br />
from rings or key chains are often the cause of damage.<br />
Under some circumstance such damage to the aluminum<br />
surface can impair the appearance; however it<br />
cannot impair the function of the fitting.<br />
Powder coated aluminum<br />
Powder coating is an environmentally friendly process.<br />
The powder coating is applied through electrostatic<br />
charging. In the subsequent burn in process the<br />
powder particles are networked at a temperature<br />
of approximately 200°C. After cooling the surface is<br />
immediately ready for use. Due to the system-based<br />
higher coating thickness there is good resistance to<br />
mechanical stress.<br />
All of our fittings can be powder coated in standard<br />
RAL colors (see page 27), as well as in other RAL colors.<br />
Brass<br />
Brass fittings are manufactured in the forging or<br />
casting process. A precisely defined copper-zinc alloy<br />
ensures high quality.<br />
Untreated brass surfaces tend to quickly develop a<br />
patina, which is why we offer our brass fittings in the<br />
finish „Brass high gloss polished and enameled“ with<br />
the catalogue designation „MS“. In this regard however<br />
we must point out that particularly outdoors, due to<br />
weather influences and mechanical damage, the paint<br />
coat can be damaged. Consequently we also offer the<br />
surface finish „Brass high-gloss polished unpainted“<br />
(„MS-N“) as an alternative, which develops a much<br />
desired patina or „Brass zirconium nitride“ („MS-PVD)<br />
that is virtually indestructible.<br />
In the version „Brass high-gloss polished unpainted“<br />
(„MS-N“) the surface is given a tarnish prevention<br />
treatment for delivery. This is similar to a transparent<br />
lacquer; however it can be easily removed. To remove<br />
this coating, moisten a soft cloth with solvent and wipe<br />
off the fitting so that no sealing remnants remain. Now<br />
the fitting can form a uniform patina.<br />
PVD hard coatings<br />
With our polished brass fittings (MS-POL) and polished<br />
stainless steel fittings (E-POL) we offer you the possibility<br />
of a PVD hard coating.<br />
We use a cathodic sputtering process supported in a<br />
magnetic field to apply coatings with extreme bonding<br />
strength that are particularly resistant to corrosion and<br />
oxidation.<br />
The versions, brass zirconium nitride coated (MS-<br />
PVD), and stainless steel PVD brass color coated (E-MS-<br />
PVD), are examples of these highly abrasion resistant<br />
hard coatings that are particularly well suited for<br />
outdoor implementation, thanks to their UV-resistance<br />
and resistance to corrosion.<br />
Stainless steel<br />
Stainless steel as a material is outstanding for door<br />
fittings and window pulls, both indoors and outdoors,<br />
due to its resistance to corrosion.<br />
Stainless steel fittings are particularly well suited<br />
for all high traffic doors, such as those in public buildings,<br />
hospitals, schools, kindergartens, or in sport<br />
facilities. Even under the heaviest continuous use the<br />
material hardly abrades at all, nor does it show traces<br />
of mechanical damage, such as scratches and impact.<br />
Due to the alloy components nickel and chrome, fittings<br />
made of stainless steel are very easy to maintain.<br />
A chrome-nickel steel is used for WG fittings with a<br />
material quality in accordance with DIN 17 440, material<br />
no. 1.4301 for lever handles, backplates, and roses.<br />
Maintenance instructions<br />
Our fittings are generally maintenance-free.<br />
We recommend to retight all attachment screws<br />
and to control the attachment screw of the lever handle<br />
after 4–6 weeks or before putting into service. You<br />
can compensate a decrease of the door leafs (in case<br />
of wooden doors) as well as mounting tolerances or<br />
bracings (loosenings).<br />
Likewise we also recommend you to check the<br />
firm seating of the screws once or twice a year, and<br />
to tighten them if necessary.<br />
Agents<br />
To maintain fittings we recommend that only mild<br />
cleaning agents (e.g. suds) are used. In no case should<br />
aggressive cleaning agents, scouring powders, solvents<br />
or thinners be used.<br />
Additionally we recommend you to check all fastening<br />
screws including those of the lever handle and to<br />
tighten if necessary.<br />
Mounting<br />
Correct mounting can only be guaranteed when using<br />
our drilling templates (see accessory program).<br />
The advantages<br />
– correct mounting<br />
– full warranty<br />
– rapid mounting time<br />
Precise boreholes provide support for the mounting<br />
components and therefore the entire fitting. Mounting<br />
is faster and also less expensive. Drilling templates are<br />
delivered in a plastic case and, for easier identification,<br />
have a coloured powder coating.<br />
Please note our mounting instructions as well.<br />
Fittings for Gates<br />
If fittings are used for door leafs that exceed the<br />
guidelines of the ÖNORM B 5330 and B 3850 in their<br />
dimensions and requirements, and therefore fall in the<br />
section of „Gates“ or special door constructions, please<br />
contact the supplier to discuss details.<br />
34 <strong>Grundmann</strong> | Fittings | Introduction
Fittings | Direction Determination<br />
These tables are used to determine the direction of locks<br />
and door fittings.<br />
If handed left/right data is required, this will be indicated for the<br />
relevant products in the catalogue.<br />
Please enter the opening direction of the door (e.g. right outwards)<br />
and not the direction in which the lever handle should be mounted.<br />
Direction determination for half sets<br />
left = showing to the left<br />
right = showing to the right<br />
Direction determination<br />
for square backplates-<br />
WC-set<br />
right<br />
left<br />
door left inwards<br />
ÖNORM DIN CH-NORM<br />
lock left left right<br />
lever handle set left left left<br />
entrance set left left left<br />
lever handle pair left left left<br />
lever handle female part left left left<br />
lever handle male part right right right<br />
DIN left<br />
inside<br />
outside<br />
door left inwards<br />
door left outwards<br />
ÖNORM DIN CH-NORM<br />
lock left left right<br />
lever handle set right right right<br />
entrance set right right right<br />
lever handle pair right right right<br />
lever handle female part right right right<br />
lever handle male part left left left<br />
DIN left<br />
inside<br />
outside<br />
door right outwards<br />
ÖNORM DIN CH-NORM<br />
lock right right left<br />
lever handle set left left left<br />
entrance set left left left<br />
lever handle pair left left left<br />
lever handle female part left left left<br />
lever handle male part right right right<br />
DIN right<br />
inside<br />
outside<br />
door left outwards<br />
door right outwards<br />
door right inwards<br />
ÖNORM DIN CH-NORM<br />
lock right right left<br />
lever handle set right right right<br />
entrance set right right right<br />
lever handle pair right right right<br />
lever handle female part right right right<br />
lever handle male part left left left<br />
DIN right<br />
inside<br />
outside<br />
door right inwards<br />
<strong>Grundmann</strong> | Fittings | Introduction 35
36 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong>
GEOS-OBJEKT-<br />
BESCHLÄGE WG4<br />
FÜR VOLLBAU-<br />
TÜREN FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
BUILDINGS<br />
product group<br />
GEOS and WG4<br />
Standard-fittings for<br />
Commercial and Public<br />
Buildings<br />
Explanations,<br />
Technical Support<br />
Fittings for wooden, steel<br />
and glass doors, with<br />
matching window pulls<br />
Knobs<br />
38<br />
46<br />
66<br />
<strong>Grundmann</strong> Einleitung 37
GEOS and WG4 | Fittings for Commercial and Public Buildings<br />
Product Specification | classification<br />
GEOS commercial fittings have a twist mount<br />
bearing and are suitable for use in wood, metal,<br />
glass and metal frame doors. They are tested in<br />
accordance with ÖNORM EN 1906 and conform<br />
to the requirements of use category 4.<br />
→ All models are available tested for fire resistance in<br />
accordance with DIN 18273FS and ÖNORM B 3859.<br />
→ The majority of the models can also be used in<br />
emergency escape doors in accordance with EN 179.<br />
Please also take the notes on the individual products<br />
into account.<br />
→ The fittings are marked «GEOS», on fire resistant<br />
fittings the fire-resistance marking is located on the<br />
fire-resistant cover of the support structure.<br />
→ GEOS offers a wide range of plates, with or without<br />
visible screws.<br />
→ GEOS offers additional products such as door<br />
handles, doorstops and window fittings with metal<br />
screens.<br />
→ GEOS offers a special range of fittings for hospitals<br />
and homes of people with special needs.<br />
→ GEOS offers fittings with ball bearings especially for<br />
use in schools.<br />
→ GEOS locks in the 400 series are an addition to the<br />
range. They are also characterised by high load capacity<br />
– see chapter entitled «locks».<br />
GEOS-fittings<br />
GEOS commercial fittings generally include a ball bearing.<br />
By this we mean a twisting handle mount with the<br />
plate and/or with the rose and the substructure in order<br />
to be better able to absorb tensile load that is exerted<br />
on the handle connection. GEOS commercial fittings<br />
are of high quality and are very well suited for use in<br />
situations with unusually high load factors, such as in<br />
schools, hospitals or authority offices.<br />
→ All GEOS commercial fittings are designed as a<br />
female element on both sides.<br />
→ The handle pin is simple to exchange. This enables<br />
easy and exact adjustment to the actual thickness of<br />
the door leaf.<br />
→ The door thickness is usually 38mm – 43 mm; special<br />
door thicknesses must be stated.<br />
WG4-fittings<br />
WG4 commercial fittings are equipped with a commercial<br />
mounting in the form of a metal plain bearing. The<br />
handle is equipped with a firmly pivoted circlip.<br />
Classification key for GEOS- and WG4-fittings<br />
GEOS-fittings with ball bearing - classification key in accordance with EN 1906<br />
Item 1 2 3 4 5 6 7 8<br />
Use category Durability Door mass Fire resistance Security<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Class 4 7 – 1 1 2 0 U<br />
WG4-fittings with metal slide bearing - classification key in accordance with EN 1906<br />
Item 1 2 3 4 5 6 7 8<br />
Use category Durability Door mass Fire resistance Security<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Class 4 7 – 1 0 2 0 U<br />
38 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
BUILDINGS<br />
GEOS-ball bearing (K)<br />
→ The handle is riveted in the inner ring of the ball bearing so that it is fully turnable.<br />
→ The outer ring of the ball bearing is permanently worked into the rosette holder.<br />
This connection ensures an additional hold of the handle fittings on the door leaf<br />
and is characterized by its capacity to withstand high stresses in the axial and<br />
radial direction.<br />
→ The ball bearing offers particular ease of movement and is maintenance free.<br />
→ Reinforced design for at least 1.000.000 times of open-close movements<br />
(= This is 5 times more than the required capacity according to the standards<br />
of EN 1906 class 4.): suited for schools, hospitals and public buildings.<br />
→ guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
→ The slide bearing is made of brass.<br />
→ The handle is mounted tightly pivoted in the brass plain bearing.<br />
The brass bearing with different handle neck materials (aluminium or<br />
stainless steel) offers an ideal combination of bearing materials and suits best<br />
as commercial mounting.<br />
→ The bearing is maintenance free.<br />
→ Tested according to the standards of EN 1906 class 4: 200.000 times of openclose<br />
movements . Suited for offices, hotels and public buildings.<br />
→ guarantee period: 2 years<br />
Reinforced design of the ball bearing (K)<br />
suited for D52/D51-backplates<br />
→ Especially suited for emergency exit doors,when they are counter-screwed<br />
with horizontal bars<br />
→ Reinforced base plate made of a steel sheet (3,5 mm thickness).<br />
→ Screwing M5<br />
Reinforced design of the metal slide bearing(M)<br />
suited for D52/D51-backplates<br />
→ Especially suited for emergency exit doors,when they are counter-screwed<br />
with horizontal bars<br />
→ Reinforced base plate made of a steel sheet (3,5 mm thickness).<br />
→ Screwing M5<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction 39
Area of use<br />
For specialist solutions: radiation protection doors | construction without obstacles |<br />
corrosion risk<br />
Area of use «radiation protection doors»<br />
ÖNORM S 5210 regulates the requirements for radiation protection doors. A<br />
specialist lock with two nuts and two cylinder penetrations is used because<br />
of the lead plates that are installed. We can offer our GEOS half fittings<br />
especially for this lock, mounted displaced from one another on the door<br />
leaf and individually on each side. This arrangement of lock and fitting prevents<br />
radiation passing through the door leaf when installed correctly. GEOS<br />
half handle fittings with a counterbracing pin 248 are used, as it is not permitted<br />
to drill or screw through the door leaf. The screws only on the rebate<br />
side are usually a problem (there is often only a wood thickness of 5mm - 6<br />
mm available). For this reason we offer you rosette fittings with a special<br />
screw system against a counterplate with integrated M4 screws. The exact<br />
arrangement of the half handle fittings can be seen in this sketch.<br />
Model 1700 GEOS - Area of use «corrosion risk»<br />
Special requirements for stainless steel<br />
Corrosion risk exists everywhere where the support structure of the fitting<br />
can come into contact with aggressive, corrosive liquids or vapour. In<br />
tunnels, for example the saliferous atmosphere can have an effect on the<br />
fittings and during cleaning of tunnels or slaughterhouses the cleaning<br />
materials can have a destructive effect on the material. Another example<br />
can be found in swimming pools, the chlorine atmosphere which can also<br />
cause damage, as can the use of fittings near the coast.<br />
We can offer the stainless steel fitting model 1700 GEOS in the following<br />
qualities:<br />
→ door handle in accordance with DIN 17 440, material no. 1.4301 (SUS<br />
304, V2A),<br />
→ for plates and/or rosettes material no. 1.4307 (SUS 304, V2A)<br />
e.g. in the finishes E-POL or E-PVD<br />
Further important product specifications in the case of corrosion risk are as<br />
follows:<br />
→ The support structure with connection screws and square pins is<br />
delivered in stainless steel 1.4301 (SUS 304, V2A) in this version.<br />
→ Use of the door handle bearing D6PFH in round roses and D51PFH or<br />
D52PFH for short backplates.<br />
→ square 9 mm spindle<br />
1.4301<br />
Area of use «construction without obstacles»<br />
Construction without obstacles is regulated in ÖNORM B 1600 and<br />
ÖNORM B 1601. Opening doors is often an obstacle that is difficult to overcome<br />
for people with special needs, children or people with a short-term<br />
handicap (e.g. a broken foot).<br />
This is why we offer fittings for handicapped persons. A specialist WC<br />
solution is also available.<br />
1.4301 1.4407 1.4301 1.4301<br />
1.4301 1.4407<br />
1.4301<br />
40 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
BUILDINGS<br />
For specialist solutions: emergency exit doors<br />
EN 179 and EN <strong>11</strong>25<br />
For emergency escape and panic bolt<br />
Both standards are in effect for bolting systems in emergency escape and<br />
emergency services routes since April 1st, 2003. Where emergency escape<br />
bolts were used primarily in earlier times these were falsely termed panic<br />
bolts, the two new standards both differentiate between emergency escape<br />
and panic bolts. There are:<br />
→ Emergency escape bolts, which are regulated in accordance with EN 179<br />
and<br />
→ Panic bolts, which are regulated in EN <strong>11</strong>25.<br />
Both standards only, however, regulate the regulations and tests of the corresponding<br />
bolt systems as well as their CE markings and do not provide any<br />
information on the condition of the emergency escape route and the corresponding<br />
doors. These requirements are each prescribed by the authorities,<br />
who must also determine which of the two systems should be used. When in<br />
doubt we always specify fittings in accordance with DN <strong>11</strong>25.<br />
A mutual inspection and certification of the lock and the fitting is necessary<br />
in order to ensure that the operating forces are achieved. The unity of<br />
the parts must be clearly recognizable in the manufacturer’s documents, e.g.<br />
with number code or similar.<br />
In principle we can state: panic bolts can be used as emergency escape<br />
bolts but emergency escape bolts are not suitable for use as panic bolts!<br />
The screws on the fitting elements are to be executed throughout.<br />
The assembly accessories such as fixing screws and door handle pins are<br />
part of the bolt unit and thus also part of the inspection.<br />
<br />
EN 179<br />
Area of use «emergency escape»<br />
Emergency escape bolts in accordance with EN 179 are for use in emergency<br />
escape doors in buildings that do not have public traffic as a rule and the<br />
visitors of which know the function of the emergency escape doors.<br />
Fittings:<br />
→ Operating elements – handles or push plates. The free end of the door<br />
handle must face the surface of the door leaf in order to prevent injury.<br />
→ Door handle or combination sets.<br />
Emergency escape bolt Type A (from EN 179 edition april 2008)<br />
C Minimum clearance between door handle and door surface (> 40 mm)<br />
W Maximum projection<br />
(< 100 mm)<br />
X Minimum length<br />
(> 120 mm)<br />
Z Distance from the leading edge of the door<br />
(< 150 mm)<br />
outside EN 179 inside EN 179<br />
70 N<br />
Farbe hellgrau<br />
Farbe dunkelgrau<br />
15° max<br />
Block 95x35<br />
U<br />
W<br />
Z<br />
X<br />
30° max.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction 41
Area of use<br />
For specialist solutions: emergency exit doors<br />
EN <strong>11</strong>25<br />
Area of use «emergency escape»<br />
Panic bolts in accordance with EN <strong>11</strong>25 are, on the other hand, used on<br />
emergency escape doors in public buildings where the visitors do not know<br />
the function of the emergency escape doors and must be able to use them in<br />
an emergency without instruction when necessary, e.g. in hospitals, schools<br />
or shopping centres.<br />
This is not valid for doors on apartments and doors on single and twofamily<br />
homes and terrace houses.<br />
Fittings:<br />
→ Escape side: rod handles or push rod across the entire width of the door.<br />
→ Outside: door handle, knob or blind plates, tested in accordance with DIN<br />
18273FS. It is not required that the free door handle end must face the<br />
door leaf!<br />
→ Double leaf doors (driving bar lock): rod handle<br />
DO numbers for GEOS fittings<br />
→ DO 20.26.01 for leaf doors (= wooden doors)<br />
Suitable for round rosettes and plate fittings<br />
→ DO 20.26.02 for metal frame doors<br />
Suitable for oval rosette fittings<br />
DO numbers for locks<br />
→ BKS<br />
EU Conformity certificate no.0432-BPR-0003<br />
Inspection ID DO 5.0/ DO 5.1/ DO 9.1/ DO 9.2/ DO 9.6<br />
→ BMH<br />
EU Conformity certificate no.0432-BPR-000041<br />
Inspection ID DO 5.3/ DO 6.16/ DO 6.8/ DO 9.2<br />
→ KABA<br />
Kabamatic lock Series 128 and Kabamatic elolegic lock Series 128,<br />
-in accordance with inspection certificate no. 12000<strong>11</strong>38.85 and no.<br />
12000<strong>11</strong>38.95, Inspection ID DO no. 6.17<br />
→ DORMA<br />
EU Conformity certificate no.0432-BPR-0005<br />
Inspection ID DO no. 20.4.01/DO 20.4.02<br />
outside EN <strong>11</strong>25 inside EN <strong>11</strong>25<br />
The release pressure is regulated with two<br />
different tests (A + B)<br />
1000 N<br />
80 N 220 N<br />
Test A<br />
Door without<br />
pre-load<br />
Test B<br />
Door with<br />
pre-load<br />
42 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
BUILDINGS<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction 43
Area of use<br />
Spindle variations<br />
Spindles for fire retardant and emergency exit doors<br />
Spindles for locks with normal function<br />
→ full-lenght door handle pin<br />
Item no. 251V<br />
Locks and fire retardant locks<br />
Normal follower<br />
outside<br />
inside<br />
A<br />
B<br />
Article no. lever handle follower spindle length<br />
246V/D8,5/N9<br />
246V/D9/N9<br />
241V/8,5<br />
241V/9<br />
8,5<br />
9<br />
8,5<br />
9<br />
9<br />
9<br />
9<br />
9<br />
45, 50, 55, 60, 65,<br />
70, 80 per lever<br />
handle male parte<br />
55, 65, 105<br />
SWING DOOR WING<br />
T<br />
C<br />
D<br />
248V/D8,5/N9<br />
248V/D9/N9<br />
248V/D8,5/N8,5<br />
8,5<br />
9<br />
8,5<br />
9<br />
9<br />
8,5<br />
50, 55, 60, 65,<br />
70, 80<br />
the split lever handle spindle is delivered from the producer<br />
of the push bar<br />
E 242V/9 9 9 90, 120<br />
Stifte für Schlösser für Fluchttüren<br />
→ Variation A<br />
with split spindle<br />
outside<br />
inside<br />
→ Variation C<br />
with expanding half set spindle<br />
outside<br />
inside<br />
item no. 246V<br />
→ fire retardant locks, locks for emergency exit doors<br />
in accordance with EN 179 and EN <strong>11</strong>25.<br />
→ split follower – SWING DOOR WING<br />
25–32 TA TI 25–32<br />
item no. 248V<br />
→ fire retardant locks, locks for emergency exit doors<br />
in accordance with EN 179 and EN <strong>11</strong>25.<br />
→ normal follower<br />
→ door leaf not drilled through<br />
→ cremone bolt lock –LOCKED DOOR WING<br />
<strong>11</strong> TI 25–32<br />
→ Variation B<br />
with half set spindle<br />
outside<br />
item no. 241V<br />
→ fire retardant locks, locks for emergency exit doors<br />
in accordance with EN 179 and EN <strong>11</strong>25.<br />
→ normal follower<br />
→ door leaf drilled through<br />
→ cremone bolt lock –LOCKED DOOR WING<br />
inside<br />
7 TI 25–32<br />
→ Variation D<br />
Short plate half set<br />
Counter-screwed for panic locks<br />
with horizontal bar<br />
in accordance with EN <strong>11</strong>25<br />
→ GEOS fire resistant short plate half set with door<br />
handle or with knob or push plate in accordance<br />
with DIN 18273FS, with support neck M4, consistent<br />
with the counter-screw for panic bolt with<br />
horizontal bar – see <strong>Grundmann</strong>-catalogues for<br />
emergency exit doors.<br />
outside<br />
25–32<br />
TA<br />
inside<br />
→ Variation E<br />
with rotating half set spindle<br />
item no. 242V<br />
→ fire retardant locks, locks for emergency exit<br />
doors in accordance with EN 179<br />
with latch lever-function<br />
→ normal follower<br />
→ SWING DOOR WING<br />
outside<br />
T<br />
inside<br />
TA = distance from centre of lock, outside of door leaf<br />
TI = distance from centre of lock, inside of door leaf<br />
Note<br />
In the event that a door handle set for fire resistant or emergency escape<br />
door locks has to be exchanged for an entrance set, but the split spindle must<br />
remain, we can offer spindle 246W.<br />
44 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
BUILDINGS<br />
GEOS-Fittings<br />
for flush door leaves made of<br />
wood and metal<br />
→ STANDARD DOORS<br />
Set of lever handles, ÖNORM and DIN<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D6K, D51K, D52K, D53K, D55K<br />
GEOS-set of lever handles (or entrance set) with round<br />
roses (short backplates or square backplates), with ball<br />
bearing with snap-in mounting, for standard doors.<br />
Fixed-rotating housed lever handle, anti-loosening<br />
protected and fully adjustable lever handle connection<br />
with solid square spindle.<br />
Roses (backplates) with hidden screws, suitable<br />
for profile cylinder (or with bit keyhole or red/white<br />
display and emergency release).<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model), e.g. GEOS 1554/D6K/55Z F1-SAT.<br />
In case entrance sets or WC-sets of square backplates<br />
are ordered, left/right data is required.<br />
→ FIRE RETARDANT DOORS<br />
Set of lever handles, ÖNORM B 3859<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D6K, D51K, D52K, D53K, D55K<br />
GEOS-set of lever handles (or entrance set) with round<br />
roses (short backplates or square backplates), with<br />
ball bearing, for fire retardant doors. Fixed-rotating<br />
housed lever handle, anti-loosening protected and fully<br />
adjustable lever handle connection with solid square<br />
spindle.<br />
Roses (backplates) with hidden screws, suitable for<br />
profile cylinder.<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model), e.g. GEOS 1554/D6K/55ZFH<br />
F1-SAT. In case entrance sets of square backplates are<br />
ordered, left/right data is required.<br />
ÖNORM<br />
B 3859<br />
→ FIRE RETARDANT DOORS<br />
Set of lever handles, DIN 18273FS<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D6K, D51K, D52K, D53K, D55K<br />
GEOS-set of lever handles (or entrance set) with round<br />
roses (short backplates or square backplates), with<br />
ball bearing, for fire retardant doors. Fixed-rotating<br />
housed lever handle, anti-loosening protected and fully<br />
adjustable lever handle connection with solid square<br />
spindle.<br />
Roses (backplates) with hidden screws, suitable for<br />
profile cylinder.<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model),e.g. GEOS 1554FH/ D6K/55ZFH<br />
F1-SAT. In case entrance sets of square backplates are<br />
ordered, left/right data is required.<br />
DIN<br />
18273FS<br />
GEOS | Tender texts<br />
→ EMERGENCY EXIT DOORS<br />
Set of lever handles, ÖNORM EN 179<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D6K, D51K, D52K, D53K, D55K<br />
GEOS-set of lever handles (or entrance set) with round<br />
roses (short backplates or square backplates), with<br />
ball bearing, for emergency exit doors. Fixed-rotating<br />
housed lever handle, anti-loosening protected and fully<br />
adjustable lever handle connection with solid square<br />
spindle.<br />
Roses (backplates) with hidden screws, suitable for<br />
profile cylinder.<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model), e.g. GEOS 1554AFH/D6K/55ZFH<br />
F1-SAT. In case entrance sets of square backplates are<br />
ordered, left/right data is required.<br />
<br />
GEOS-Fittings<br />
for tubular frame doors<br />
→ TUBULAR FRAME DOORS/STANDARD<br />
Set of lever handles, ÖNORM and DIN<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D8K<br />
GEOS-set of lever handles (or entrance set) with<br />
small roses, with ball bearing, for standard tubular<br />
frame doors. Fixed-rotating housed lever handle, antiloosening<br />
protected and fully adjustable lever handle<br />
connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder.<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model), e.g. GEOS 1554/D8K/55Z F1-SAT.<br />
→ FIRE RETARDANT TUBULAR FRAME DOORS<br />
Set of lever handle, DIN 18273FS<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D8K<br />
GEOS-set of lever handles (or entrance set) with small<br />
roses, with ball bearing, for fire retardant tubular<br />
frame doors. Fixed-rotating housed lever handle, antiloosening<br />
protected and fully adjustable lever handle<br />
connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder.<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model), e.g. GEOS 1554FH/D8K/55ZFH<br />
F1-SAT.<br />
DIN<br />
18273FS<br />
<br />
→ TUBULAR FRAME DOORS FOR ESCAPE<br />
ROUTES<br />
Set of lever handles, EN 179<br />
ÖNORM EN 1906<br />
Category of use grade 4<br />
Ball bearing D8K<br />
GEOS-set of lever handles (or entrance set) with small<br />
roses, with ball bearing, for emergency exit doors.<br />
Fixed-rotating housed lever handle, anti-loosening<br />
protected and fully adjustable lever handle connection<br />
with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder.<br />
Finish aluminium silver anodized satin finish (other<br />
finishes see model), e.g. GEOS 1554AFH/D8K/55ZFH<br />
F1-SAT.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | Introduction 45
Fittings for Commercial and<br />
Public Sectors<br />
Model 1500<br />
GEOS / WG4<br />
Strict specifications such as the level handle end that<br />
turns back toward the door and certain technical<br />
details for casting in the fire-resistant insert, narrow<br />
the creative options when designing fittings for<br />
commercial buildings. However Gottfried Palatin is a<br />
tinkerer and a master of his craft. A gentle convexity<br />
on the handle nestles the lever handle in the hand and<br />
the tapering silhouette clearly distinguishes the model<br />
from its colleagues in the classic round tube design.<br />
Design: G O TTFRIED PALATIN<br />
lever handle model 1554<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 1504HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 1554 Lever handle bearings for selection Standards<br />
8<br />
56<br />
136<br />
42<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according to ÖNORM B 3859<br />
or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short ot long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 1554/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
46 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 1554 F1-SAT<br />
with square backplate D55<br />
lever handle model 1554 F1-SAT<br />
with short backplate, angled D52<br />
lever handle model 1554 F1-SAT<br />
with short backplate, rounded D51<br />
lever handle model 1554 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) Window pull model 1504H, HA<br />
ø ø<br />
ø8<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
90<br />
75,5<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 47
Fittings for Commercial and<br />
Public Sectors<br />
Model 1600<br />
GEOS / WG4<br />
In spite of its strict functionality or perhaps<br />
because of this extremely reduced language<br />
of form the model has been well established in<br />
the market for many years. A simple round tube<br />
bent once in a simple swing, a form that does no<br />
more, and does not want to do anything more<br />
than perform its function; something for purists.<br />
Design: GRUNDMANN<br />
lever handle model 1654<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 1604HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 1654 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859<br />
or DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short ot long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 1654/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
48 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 1654 E-POL<br />
with square backplate D55<br />
lever handle model 1654 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 1654 E-POL<br />
with short backplate, rounded D51<br />
lever handle model 1654 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) Window pull model 1604H, HA<br />
ø ø<br />
ø8<br />
38<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
166<br />
23 60 60<br />
46<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
21,5 24<br />
90<br />
75,5<br />
<br />
<br />
126,5<br />
E<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
ø 8<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 49
Fittings for Commercial and<br />
Public Sectors<br />
Model 1700<br />
GEOS / WG4<br />
Our U-shaped round tube lever handle remains the<br />
bestseller among commercial building fittings. This<br />
has been part of our product catalogue since 1976,<br />
it quickly proved itself as a virtually ideal solution<br />
for large commercial buildings as it is robust, has<br />
a clear language of form, and it is secure. A classic<br />
example of the almost unnoticed but far-reaching<br />
design of everyday culture.<br />
Design: GRUNDMANN<br />
lever handle model 1754<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 1704HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 1754 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 1754/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
50 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 1754 MS<br />
with square backplate D55<br />
lever handle model 1754 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 1754 E-POL<br />
with short backplate, rounded D51<br />
lever handle model 1754 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) Window pull model 1704H, HA<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<br />
<br />
<br />
<br />
ø ø<br />
ø8<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
90<br />
75,5<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 51
Fittings for Commercial and<br />
Public Sectors<br />
Model 2100<br />
GEOS / WG4<br />
Inspired by the intense construction activity of<br />
our new State Capital St. Pölten, we commissioned<br />
Michael Schaefer to design a commercial<br />
building fitting. He presented a design where<br />
the basic idea is characterized by a round neck<br />
resting within itself that transitions to a flat<br />
sympathetic handle with an end that has been<br />
pressed into an oval. This gives the lever handle<br />
a tapering dynamic swing to the door.<br />
Design: SCHAEFER-DESIGN<br />
lever handle model 2154<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 2104HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2154 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 2154/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
52 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2154 E-POL<br />
with square backplate D55<br />
lever handle model 2154 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 2154 E-POL<br />
with short backplate, rounded D51<br />
lever handle model 2154 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) ) Window pull model 2104H, HA<br />
ø ø<br />
ø8<br />
38<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
90<br />
75,5<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 53
Fittings for Commercial and<br />
Public Sectors<br />
Model 2200<br />
GEOS / WG4<br />
A high oval lever handle that tapers slightly –<br />
this is a simple description of the Model 2200.<br />
This discretely elegant design makes the Model<br />
2200 a secret tip in the GEOS product line and<br />
it is particularly interesting for restoration of old<br />
buildings. Thus for example it can be effectively<br />
combined with the Model 600, an Early Modern<br />
apartment building classic.<br />
Design: GRUNDMANN<br />
lever handle model 2254<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 2204HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2254 Lever handle bearings for selection Standards<br />
60 8<br />
<strong>11</strong><br />
136<br />
42<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 2254/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
54 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2254 F1-SAT<br />
with square backplate D55<br />
lever handle model 2254 F1-SAT<br />
with short backplate, angled D52<br />
lever handle model 2254 F1-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2254 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) Window pull model 2204H, HA<br />
ø ø<br />
ø8<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
65<br />
43<br />
31<br />
7<br />
ø10<br />
3<br />
35 12<br />
73<br />
<strong>11</strong><br />
136<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
42<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
90<br />
75,5<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273FS<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 55
Fittings for Commercial and<br />
Public Sectors<br />
Model 2300<br />
GEOS / WG4<br />
We added this model to our product line in the<br />
early seventies at the suggestion of a Swiss<br />
customer. Because the Swiss Railways used<br />
a very similar model, it became known as the<br />
“Swiss Railways door lever”. The form became<br />
famous through a concept by the architect Max<br />
Bill, who further developed this design for the<br />
Ulm College of Art.<br />
Design:<br />
GRUNDMANN<br />
(based on a concept for the<br />
Swiss Railway)<br />
lever handle model 2354<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 2304HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2354 Lever handle bearings for selection Standards<br />
8<br />
62<br />
ø 21<br />
133<br />
44<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 2354/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
56 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2354 F1-SAT<br />
with square backplate D55<br />
lever handle model 2354 F1-SAT<br />
with short backplate, angled D52<br />
lever handle model 2354 F1-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2354 F1-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) Window pull model 2304H, HA<br />
ø ø<br />
ø8<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
65<br />
43<br />
31<br />
7<br />
ø 10<br />
3<br />
35<br />
75<br />
ø21<br />
133<br />
38<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105.5 21 31.5<br />
90<br />
75,5<br />
E 41<br />
178<br />
105.5 21<br />
<br />
<br />
189<br />
E 50<br />
105.5 21<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
ø 8<br />
46<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Backplates – fire retardant according to DIN 18273FS<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
<br />
<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
ø 8<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 57
Fittings for Commercial and<br />
Public Sectorse<br />
Model 2500<br />
GEOS / WG4<br />
Stylistically this model that is distributed<br />
throughout the industry can be considered as<br />
«Early Modern». Thus it is the most modern of the<br />
classic lever handles. Since this form is shaped<br />
with such purity special value must be placed on<br />
execution of the details. Particular value is placed<br />
on a precise weld seam in the mitre and a cleanly<br />
worked lever handle end. And because the provisions<br />
for escape doors sensibly require a handle<br />
end that is bent back to the door, we have added<br />
the model 2500N to its side.<br />
Design: GRUNDMANN<br />
lever handle model 2554<br />
with roses D6 E-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 2504HA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
window fitting model 1626HA<br />
(E-SAT only)<br />
with 90° latch<br />
prices see page 243<br />
Technical details<br />
Lever handle model 2554 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 2554/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
58 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2554 E-SAT<br />
with square backplate D55<br />
lever handle model 2554 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 2554 E-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2554 E-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm)<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
WG4 roses (50 mm ø, rose height 7 mm)<br />
Window pull model 2504H, HA<br />
<br />
<br />
<br />
<br />
<br />
<br />
Window fittings model 1626H, HA<br />
<br />
<br />
<br />
<br />
<br />
ø ø<br />
ø8<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
<br />
<br />
<br />
<br />
<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
90<br />
75,5<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
<br />
<br />
189<br />
E 50<br />
105 21.5<br />
245<br />
126,5<br />
E<br />
21,5 24<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 59
Fittings for Commercial and<br />
Public Sectors<br />
Model 2500N<br />
GEOS / WG4<br />
This model is a sensible extension to the Model<br />
2500, as it can also be proposed in accordance<br />
with the new EN standards for escape doors.<br />
However fans of mitre joint welded stainless<br />
steel parts could also go into raptures at the sight<br />
of this technically pure solution.<br />
Design: GRUNDMANN<br />
lever handle model 2554N<br />
with roses D6 F1-SAT<br />
GEOS prices see page 214<br />
WG4 prices see page 246<br />
window pull 2504NHA F1-SAT<br />
with 90° latch<br />
prices see page 242<br />
Technical details<br />
Lever handle model 2554N Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 2554N/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
60 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 2554N E-SAT<br />
with square backplate D55<br />
lever handle model 2554N E-SAT<br />
with short backplate, angled D52<br />
lever handle model 2554N E-SAT<br />
with short backplate, rounded D51<br />
lever handle model 2554N E-SAT<br />
with long backplate, rounded D53<br />
Technical details<br />
GEOS roses (aluminium 51 mm ø, stainless steel 50 mm ø, rose height 8 mm) WG4 roses (50 mm ø, rose height 7 mm) Window pull model 2504NH, HA<br />
38<br />
Attention: distance from outer edge of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<br />
<br />
<br />
<br />
ø ø<br />
ø8<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
38<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
E 41<br />
175<br />
105 21.5 31.5<br />
24<br />
E 41<br />
178<br />
105 21.5<br />
189<br />
E 50<br />
105 21.5<br />
126,5<br />
E<br />
245<br />
21,5 24<br />
90<br />
75,5<br />
<br />
<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 61
Fittings for Commercial and<br />
Public Sectors<br />
Model 4600<br />
GEOS<br />
The new model «4600 GEOS» makes a very confident<br />
appearance. With large volume in vertical<br />
design, and exclusively in the best execution<br />
- stainless steel and ball bearings. It is designed<br />
for those buildings that are subjected to real continuous<br />
stress, such as hospitals and schools.<br />
For these types of applications there is no use<br />
starting with compromises.<br />
Design: GRUNDMANN<br />
lever handle model 4654<br />
with roses D6 E-SAT<br />
GEOS prices see page 214<br />
Technical details<br />
Lever handle model 4654 Lever handle bearings for selection Standards<br />
8<br />
63<br />
21<br />
141<br />
50<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
<br />
Standard-Finish<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with<br />
square backplates (short or long backplates or round<br />
roses), with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. GEOS 4654/D55K/62Z, E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 66.<br />
Picture of WC-roses see page 67.<br />
Combination with small roses for tubular frame doors<br />
see next chapter.<br />
62 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
lever handle model 4654 E-SAT<br />
with square backplate D55<br />
lever handle model 4654 E-SAT<br />
with short backplate, angled D52<br />
lever handle model 4654 E-SAT<br />
with short backplate, rounded D51<br />
lever handle model 4654 E-SAT<br />
with long backplate, rounded D53<br />
Technical detailsails<br />
D6 roses (50 mm ø, rose height 8 mm)<br />
38<br />
GEOS-Fittings<br />
Distance E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
50<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 92 72 78 78<br />
For round cylinder 90 90 74 74 78 78<br />
50<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8,5 8 10** 9 8 9<br />
38<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Square backplate D55 Short backplate – angled D52 Short backplate – rounded D51 Long backplate D53<br />
46<br />
166<br />
23 60 60<br />
46<br />
46<br />
175<br />
E 41<br />
105 21.5 31.5<br />
24<br />
178<br />
E 41<br />
105 21.5<br />
189<br />
E 50<br />
105 21.5<br />
126,5<br />
E<br />
245<br />
21,5 24<br />
90<br />
75,5<br />
<br />
<br />
ø8<br />
R 7.5<br />
ø8<br />
R 5<br />
ø8<br />
46<br />
ø 8<br />
<strong>11</strong>2<br />
DIN 72<br />
21.5<br />
Suited for the counter-screwing of panic<br />
bolts according to EN <strong>11</strong>25 with an horizontal<br />
release rod, checked DIN 18273:<br />
- Short backplate half set with supporting<br />
extensions M5<br />
- Long and square backplate half sets with<br />
supporting extensions M4<br />
245<br />
<strong>11</strong>2 90<br />
72 75,5<br />
21,5 24<br />
Long plate D53 fire retardant according to DIN 18273FS<br />
<br />
<br />
Backplates – fire retardant according to DIN 18273<br />
ø 8<br />
GEOS backplate height: 8 mm<br />
WG4 backplate height: 7 mm<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors<br />
63
Fittings for Commercial and<br />
Public Sectors<br />
Model 17300<br />
GEOS 17<br />
Aficionados among the fittings fanciers appreciate<br />
the L-shaped classic with a somewhat<br />
thinner round pipe. A mere 17 mm diameter<br />
bestows more subtlety and finesse. Anyhow one<br />
takes it not just for its pure beauty.<br />
Design: GRUNDMANN<br />
lever handle model<br />
17354/17K/55Z E-SAT<br />
prices see page 236<br />
Technical details<br />
Lever handle model 17354 Lever handle bearings for selection Standards<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
ball bearing (K)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859 or DIN 18273FS<br />
<br />
Standard-Finish<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
for flush door leaves made of wood<br />
GEOS-lever handle sets (or entrance sets) with round<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Backplates with hidden screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), finish e.g. stainless<br />
steel satin finish, e.g. z.B. GEOS 17354/17K/55Z<br />
E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
64 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
window pull<br />
model 17304V E-SAT<br />
prices see page 243<br />
ball knob<br />
model 3154c/17148 E-SAT<br />
WC-thumb turn<br />
model 17184G E-SAT<br />
WC red/white-display<br />
model 17186 E-SAT<br />
Technical details<br />
Roses 17K (height: 6 mm, fire retardant rose: 8 mm) WC-thumb turn 17184G Ball knob 3154c Window pull 17304V (rose-height: 5 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
GEOS-Beschläge<br />
<br />
Entfernung E ÖNORM ÖN-FH DIN DIN92 DIN-FH CH-NORM CH-FH<br />
<br />
<br />
<br />
<br />
<br />
BB 90 72 78<br />
PZ 88 88 72 92 72 78 78<br />
RZ 90 90 74 74 78 78<br />
<br />
WC (WC-Stift) 90/7 78/8* 78/8*<br />
Drückerstift 8,5 8,5 8 10** 9 8 9<br />
*) mit Ausgleichshülse 7/8 Vkt., **) mit Ausgleichshülse 8/10 Vkt.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 65
Fittings for Commercial and<br />
Public Sectors<br />
Knobs<br />
GEOS / WG4<br />
In the Anglo-Saxon area the knob plays a much<br />
more prominent role than it does with us for<br />
opening and closing doors. We prefer the<br />
GEOS<br />
knob 3154a/648AFH F1-SAT<br />
schaefer-design<br />
prices see page 239<br />
handle lever, which ergonomically is much more<br />
sophisticated. But these small spherical door<br />
openers are pretty and consequently we have<br />
consistently studied this theme. By the way our<br />
knobs can be ordered in designs that turn. With<br />
a turning doorknob it’s OK if you forget your key<br />
on occasion.<br />
Design: GRUNDMANN,<br />
SCHAEFER-DESIGN<br />
GEOS<br />
knob 3054/648AFH F1-SAT<br />
design by <strong>Grundmann</strong><br />
prices see page 239<br />
WG4<br />
knob 3254L F1-SAT<br />
design by <strong>Grundmann</strong><br />
(WG4 only)<br />
Technical details<br />
Knob model 3054 3154a 3254L (WG4 only)<br />
prices see page 269<br />
<br />
<br />
ø23<br />
<br />
<br />
<br />
39<br />
16<br />
ø49<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Advices and patterns of finishes see «Explanations»,<br />
necessary ordering information see price-chapter.<br />
66 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
Fittings for Commercial and<br />
Public Sectors<br />
WC-details<br />
GEOS / WG4<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
COMMERCIAL<br />
AND PUBLIC<br />
SECTORS<br />
You surely know the following situation: You are<br />
in a public place, standing indecisively in front<br />
of a toilet door, thinking whether the longed for<br />
«quiet little place» is occupied or not. WC roses<br />
and WC plates from <strong>Grundmann</strong> are all equipped<br />
with a red/white display. And we will continue<br />
with this discrete detail in the future as well.<br />
Design: GRUNDMANN<br />
GEOS<br />
WC-rose with red/white-display<br />
prices see page 239<br />
WG4<br />
WC-rose with red/white-display<br />
prices see page 269<br />
GEOS and WG4<br />
WC-rose with thumb turn<br />
prices see page 239 and 269<br />
Technical details<br />
GEOS model 684GA (with thumb turn) and 686T (with red/white-display)<br />
WG4 model 7084GA (with thumb turn) and 7086T (with red/white-display)<br />
ø51<br />
ø50<br />
8<br />
5<br />
19<br />
7<br />
ø8<br />
ø8<br />
15<br />
ø7<br />
ø7<br />
38<br />
5<br />
38<br />
GEOS-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
WG4-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors 67
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
68 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Wooden, Steel and Glass Doors
product group<br />
GEOS and WG4<br />
Fittings for Tubular<br />
Frame Doors<br />
GEOS<br />
WG4<br />
OBJEKT-<br />
BESCHLÄGE<br />
FÜR ROHR-<br />
RAHMEN-<br />
TÜREN<br />
Models 1500- 4600<br />
incl. the Z-Series<br />
Knobs for Tubular Frame<br />
Doors<br />
70<br />
85
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 1500<br />
GEOS / WG4<br />
Strict specifications such as the level handle end<br />
that turns back toward the door and certain technical<br />
details for casting in the fire-resistant insert,<br />
narrow the creative options when designing<br />
fittings for commercial buildings. However<br />
Gottfried Palatin is a tinkerer and a master of his<br />
craft. A gentle convexity on the handle nestles<br />
the lever handle in the hand and the tapering silhouette<br />
clearly distinguishes the model from its<br />
colleagues in the classic round tube design.<br />
Design: G O TTFRIED PALATIN<br />
lever handle model 1554<br />
with roses D8 F1-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 1554 Small rose model D8 Technical features<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 1554/D8K/55Z F1-SAT.<br />
<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
70 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 1500Z<br />
GEOS / WG4<br />
Usually the builder’s desire is to use a single<br />
model of lever handle throughout the entire<br />
building. Regardless of whether these are fireprotection<br />
doors, escape doors, or profile frame<br />
doors – application areas that are really quite<br />
different and that impose strict measures on the<br />
door furniture. The Series Z enables adaptation<br />
of standard forms for profile frame doors. The<br />
outlet part is an Z-shaped neck piece in the problem<br />
area near the metal frame, which then can<br />
further transport the desired form in the handle.<br />
The standard lever handle can be inserted on the<br />
non-dangerous sloping side.<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
Lever handle design:<br />
GOTTFRIED PALATIN<br />
lever handle model 1554Z<br />
with roses D8 E-SAT<br />
GEOS-prices see page 278<br />
WG4-prices see pag 288<br />
Design Series Z:<br />
SCHAEFER-DESIGN<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 1554Z Small rose model D8 Technical features<br />
56<br />
48 22<br />
ø20<br />
13<br />
136<br />
ø20<br />
42<br />
42<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
136<br />
160<br />
Standard-Finish<br />
E-SAT = stainless steel satin finish<br />
<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish 1554Z/D8K/55Z F1-SAT.<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
71
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 1600<br />
GEOS / WG4<br />
In spite of its strict functionality or perhaps<br />
because of this extremely reduced language<br />
of form the model has been well established in<br />
the market for many years. A simple round tube<br />
bent once in a simple swing, a form that does no<br />
more, and does not want to do anything more<br />
than perform its function; something for purists.<br />
Design: GRUNDMANN<br />
lever handle model 1654<br />
with roses D8 E-POL<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 1654 Small rose model D8 Technical features<br />
<br />
<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 1654/D8K/55Z F1-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
72 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 1700<br />
GEOS / WG4<br />
Our U-shaped round tube lever handle remains<br />
the bestseller among commercial building<br />
fittings. This has been part of our product catalogue<br />
since 1976, it quickly proved itself as a<br />
virtually ideal solution for large commercial<br />
buildings as it is robust, has a clear language of<br />
form, and it is secure. A classic example of the<br />
almost unnoticed but far-reaching design of<br />
everyday culture.<br />
Design: GRUNDMANN<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
lever handle model 1754<br />
with roses D8 F1-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 1754 Small rose model D8 Technical features<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 1754/D8K/55Z F1-SAT.<br />
<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
73
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 1700Z<br />
GEOS / WG4<br />
Of course our U-shaped bestseller is also available<br />
in the Z Series. The outlet part is a Z-shaped<br />
neck piece in the problem area near the metal<br />
frame, which then can further transport the<br />
desired form unchanged in the handle part<br />
Lever handle design: GRUNDMANN<br />
Design Series Z: SCHAEFER-DESIGN<br />
lever handle model 1754Z<br />
with roses D8 E-SAT<br />
GEOS-prices see page 278<br />
WG4-prices see page 288<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 1754Z Small rose model D8 Technical features<br />
GEOS-ball bearing (K)<br />
140<br />
at least 1.000.000 times of<br />
<br />
open-close movements<br />
guarantee period: 5 years<br />
63<br />
22<br />
52<br />
ø20<br />
13<br />
ø20<br />
140<br />
165<br />
56<br />
Standard-Finishes<br />
E-SAT = stainless steel satin finish<br />
56<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 1754Z/D8K/55Z E-SAT.<br />
<br />
<br />
<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Fire retardant according to DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
74 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2100<br />
GEOS / WG4<br />
New manufacturing technologies also permit<br />
stainless steel fittings; for some time these were<br />
considered to represent a breaking away from<br />
conventional form specifications. Inspired by the<br />
intense construction activity of our new State<br />
Capital St. Pölten, we commissioned Michael<br />
Schaefer to design a commercial building fitting.<br />
He presented a design where the basic idea is<br />
characterized by a round neck resting within<br />
itself that transitions to a flat sympathetic handle<br />
with an end that has been pressed into an oval.<br />
This gives the lever handle a tapering dynamic<br />
swing to the door.<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
Design:<br />
SCHAEFER-DESIGN<br />
lever handle model 2154<br />
with roses D8 E-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
Technical details<br />
Lever handle model 2154 Small rose model D8<br />
ÖNORM EN 1906<br />
Technical features<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2154/D8K/55Z F1-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
75
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2200<br />
GEOS / WG4<br />
A high oval lever handle that tapers slightly –<br />
this is a simple description of the Model 2200.<br />
This discretely elegant design makes the Model<br />
2200 a secret tip in the GEOS product line and<br />
it is particularly interesting for restoration of old<br />
buildings. Thus for example it can be effectively<br />
combined with the Model 600, an Early Modern<br />
apartment building classic.<br />
Design:<br />
GRUNDMANN<br />
lever handle model 2254<br />
with roses D8 F1-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 2254 Small rose model D8 Technical features<br />
13<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
60<br />
<strong>11</strong><br />
136<br />
42<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2254/D8K/55Z F1-SAT.<br />
<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
76 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2300<br />
GEOS / WG4<br />
We added this model to our product line in the<br />
early seventies at the suggestion of a Swiss<br />
customer. Because the Swiss Railways used<br />
a very similar model, it became known as the<br />
“Swiss Railways door lever”. The form became<br />
famous through a concept by the architect Max<br />
Bill, who further developed this design for the<br />
Ulm College of Art.<br />
GEOS<br />
WG4<br />
Design:<br />
GRUNDMANN<br />
(based on a concept for<br />
the Swiss Railway)<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
lever handle model 2354<br />
with roses D8 F1-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 2354 Small rose model D8 Technical features<br />
13<br />
62<br />
ø 21<br />
133<br />
44<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2354/D8K/55Z F1-SAT.<br />
<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
77
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2300Z<br />
GEOS / WG4<br />
The Z-shaped neckpiece is an adapter so-tospeak<br />
that offers protection from unnecessary<br />
injuries on the rebate side of a profile frame door.<br />
A functional and simple part that is well compatible<br />
and thus also can assume the formal logic of<br />
such a wide-spread model as that of the railway<br />
handle lever and bring it to a good conclusion.<br />
Design: GRUNDMANN<br />
(based on a concept for<br />
the Swiss Railway)<br />
Design Series Z: SCHAEFER-DESIGN<br />
lever handle model 2354Z<br />
with roses D8 E-SAT<br />
GEOS-prices see page 278<br />
WG4-prices see page 288<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 2354Z Small rose model D8 Technical features<br />
48 22 13 62<br />
ø21<br />
133<br />
ø21<br />
44<br />
44<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
133<br />
158<br />
Standard-Finishes<br />
E-SAT = stainless steel satin finish<br />
<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2354Z/D8K/55Z E-SAT.<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
78 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2400M<br />
GEOS / WG4<br />
Model 2400M is the classic round tube<br />
variant for profile frame doors. Consistently<br />
fashioned in one tube a thumb rest is offered<br />
with this product that guarantees sufficient<br />
safety clearance. Because the lever handle<br />
again is designed to turn in toward the door<br />
the hazard of getting caught in the lever<br />
handle can be virtually eliminated.<br />
Design: GRUNDMANN<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
lever handle model 2454M<br />
with roses D8 E-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 2454M Small rose model D8 Technical features<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2454M/D8K/55Z F1-SAT.<br />
<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
79
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2500<br />
GEOS / WG4<br />
An L-shaped mitred and welded round tube<br />
made of stainless steel is probably the most<br />
timeless of all forms and presumably this is why<br />
it is also so popular with architects.<br />
Stylistically this model that is distributed<br />
throughout the industry can be considered as<br />
«Early Modern». Thus it is the most modern<br />
of the classic lever handles. Since this form is<br />
shaped with such purity special value must be<br />
placed on execution of the details. Particular<br />
value is placed on a precise weld seam in the<br />
mitre and a cleanly worked lever handle end.<br />
And because the provisions for escape doors<br />
sensibly require a handle end that is bent back<br />
to the door, we have added the model 2500N to<br />
its side.<br />
lever handle model 2554<br />
with roses D8 E-SAT<br />
Design: GRUNDMANN<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 2554 Small rose model D8 Technical features<br />
<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
60<br />
130<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2554/D8K/55Z F1-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
80 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2500N<br />
GEOS / WG4<br />
And because the provisions for escape doors<br />
sensibly require a handle end that is bent back<br />
toward the door, we have added the model<br />
2500N to its side, which can alternatively be proposed<br />
for appropriate doors.<br />
Design: GRUNDMANN<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
lever handle model 2554N<br />
with roses D8 E-SAT<br />
GEOS-prices see page 274<br />
WG4-prices see page 284<br />
Category of use grade 4<br />
Technical details<br />
Lever handle model 2554N Small rose model D8<br />
ÖNORM EN 1906<br />
Technical features<br />
71<br />
50/52<br />
29<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
13<br />
62<br />
ø20<br />
42<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
140<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2554N/D8K/55Z F1-SAT.<br />
<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
81
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 2500NZ<br />
GEOS / WG4<br />
When the user’s security is of utmost importance<br />
and the builder naturally wants to communicate<br />
this fact, then this model should be<br />
selected. It has been developed for the requirements<br />
profile of profile frame doors as well as for<br />
escape doors. The high-quality material, stainless<br />
steel, underlines this solid and circumspect<br />
impression.<br />
Lever handle design: GRUNDMANN<br />
Design Series Z:<br />
SCHAEFER-DESIGN<br />
lever handle model 2554NZ<br />
with roses D8 E-SAT<br />
GEOS-prices see page 278<br />
WG4-prices see page 288<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 2554NZ Small rose model D8 Technical features<br />
62<br />
13<br />
22<br />
62<br />
ø20<br />
140<br />
ø20<br />
140<br />
165<br />
42<br />
42<br />
Standard-Finishes<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 2554Z/D8K/55Z E-SAT.<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
WG4-metal slide bearing (M)<br />
at least 200.000 times of<br />
open-close movements<br />
guarantee period: 2 years<br />
(see price-catalogue)<br />
Fire retardant according to DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
82 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 4600<br />
GEOS<br />
The model «4600 GEOS» makes a very confident<br />
appearance. With large volume in vertical<br />
design, and exclusively in the best execution<br />
- stainless steel and ball bearings. It is designed<br />
for those buildings that are subjected to real continuous<br />
stress, such as hospitals and schools.<br />
For these types of applications there is no use<br />
starting with compromises.<br />
Design: GRUNDMANN<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
lever handle model 4654<br />
with roses D8 E-SAT<br />
GEOS-prices see page 274<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 4654 Small rose model D8 Technical features<br />
13<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
Fire retardant according to DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
<br />
Standard-Finishes<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 4654/D8K/55Z E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
Matching knobs see page 85.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
83
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Model 4600Z<br />
GEOS<br />
The model 4600 for tubular frame doors is<br />
availabe in the Z finish, as well. The Z-shaped<br />
neck piece is welded with the bulky grip element<br />
to make a respectable whole, equally safe and<br />
expressive.<br />
Lever handle design: GRUNDMANN<br />
Design series Z: SCHAEFER-DESIGN<br />
lever handle model 4654Z<br />
with roses D8 E-SAT<br />
GEOS-prices see page 278<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Technical details<br />
Lever handle model 4654Z Small rose model D8 Technical features<br />
<br />
<br />
<br />
GEOS-ball bearing (K)<br />
at least 1.000.000 times of<br />
open-close movements<br />
guarantee period: 5 years<br />
13<br />
22<br />
48<br />
21<br />
50<br />
<br />
<br />
height of lever handle rose: 13 mm<br />
height of cylinder rose: 8 mm<br />
<br />
<br />
<br />
Fire retardant according to DIN 18273FS<br />
Suited for emergency exit doors<br />
according to EN 179<br />
140<br />
166<br />
<br />
Standard-Finishes<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
for tubular frame doors<br />
GEOS-lever handle sets (or entrance sets) with small<br />
roses, with ball bearing. Fixed-rotating-housed lever<br />
handle; anti-loosening protected and fully adjustable<br />
lever handle connection with solid square spindle.<br />
Roses with hidden screws, suitable for profile cylinder<br />
installation. Finish e.g. 4654Z/D8K/55Z E-SAT.<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
84 <strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors
Fittings for Commercial and Public<br />
Sectors – for Tubular Frame Doors<br />
Knobs<br />
GEOS / WG4<br />
Knob 3054M/848HM E-SAT<br />
Design: <strong>Grundmann</strong><br />
GEOS-prices see pagee 281<br />
We have always given top priority to the functional<br />
security aspect. Knobs offer less grasping<br />
surface than do lever handles and they can injure<br />
the fingers when closing the door. That is why all<br />
designs intentionally turn away from the rebate<br />
side of the door. The plate handle also offers the<br />
possibility of hiding the fingers, as if they were<br />
behind a protective plate.<br />
Design: GRUNDMANN,<br />
SCHAEFER-DESIGNN<br />
GEOS<br />
WG4<br />
FITTINGS FOR<br />
TUBULAR<br />
FRAME DOORS<br />
Knob 3154aM/848HM E-SAT<br />
Design: <strong>Grundmann</strong><br />
GEOS-prices see page281<br />
Knob 5664G/848HM F1-SAT<br />
Design: schaefer-design<br />
GEOS-prices see page 281<br />
Technical details<br />
Knob model 3054M Knob 3154aM Knob 5664G Knob-rose 848HM<br />
19<br />
<br />
54<br />
<br />
<br />
height of knob rose: 10 mm<br />
40<br />
34<br />
ø19<br />
85<br />
20<br />
56<br />
71<br />
47<br />
51<br />
Finishes model 3054M and 5664G<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finish modell 3054M on request<br />
E-MS-PVD = stainless steel brass coloured<br />
zircon-nitride coated<br />
Finish modell 3154aM<br />
E-SAT = stainless steel satin finish<br />
Further tender texts, advices and patterns of finishes<br />
see «Explanations», necessary ordering information<br />
see price-chapter.<br />
<strong>Grundmann</strong> | Fittings for Commercial and Public Sectors | For Tubular Frame Doors<br />
85
86 <strong>Grundmann</strong> | WG | Fittings for House and Home<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong>
WG: Fittings for House and Home<br />
product group<br />
WG-Fittings for<br />
House and Home<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
Explanations<br />
Models 500-1000<br />
Models <strong>11</strong>00-2000<br />
Models 2100-2500<br />
Models 7000-18000<br />
Knobs<br />
Roses and Backplates<br />
88<br />
90<br />
104<br />
<strong>11</strong>2<br />
<strong>11</strong>6<br />
124<br />
126<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home 87
WG Fittings for House and Home<br />
WG | Product Specification | Bearings<br />
WG residential building fittings have a mounted,<br />
non-turning polyamide bearing of usage class 2<br />
and 3 (in the fire resistant version) in accordance<br />
with EN 1906.<br />
→ All fittings can be supplied as fire resistant in accordance<br />
with ÖNORM B 3859.<br />
→ All door handles that are available in GEOS quality<br />
can also be supplied with a WG quality bearing.<br />
→ The fittings are marked as WG in accordance with<br />
their bearing. For fire resistant fittings the FH mark<br />
is on the fire resistant cover of the support structure.<br />
→ WG offers window fittings with plastic screens and<br />
an attractive box-type window range in the classic<br />
sector.<br />
WG residential models are split into three product<br />
groups to aid consumer comprehension:<br />
→ WG-classic<br />
Door handle forms created in the late 19th till the<br />
end of 20th century.<br />
→ WG-basic<br />
Uncomplicated door handle forms that are also<br />
available at particularly attractive prices.<br />
→ WG-home-office<br />
A series of door handles in a modern and functional<br />
design.<br />
Special features<br />
→ D70 roses and plates of model 1762(Z) are also<br />
available with spring assisted door handles.<br />
Door thickness<br />
Door thickness 38–43 mm, please provide special<br />
door thickness<br />
Right or left direction<br />
→ WG door handles in symmetrical forms are generally<br />
drilled on the face and can thus be used as right or<br />
left.<br />
→ Where non symmetrical door handles are used for a<br />
combination set then information is required regarding<br />
right or left use.<br />
Universal bearing<br />
Good slide characteristics and resistance to wear. The<br />
door handle bearing is maintenance free and can be<br />
exchanged simply if necessary.<br />
The support structure D6P is used for round roses D6.<br />
The door handle bearing and rose support are manufactured<br />
in one piece.<br />
WG slide bearing D70<br />
The bearing has high resistance to wear and good slide<br />
properties and is thus maintenance free.<br />
Door handle bearing and rose support are manufactured<br />
in one piece.<br />
Fittings with spring assistance<br />
The spring assistance on the door handle guarantees<br />
the handle stays in the high position even when using<br />
locks with weak nut springs.<br />
The following models can be supplied with spring<br />
assisted door handles:<br />
→ Models 570/572, 970/972<br />
→ All model combinations with D70 roses.<br />
→ All model combinations with 1762(Z) plates<br />
WG stainless steel bearing for brass fittings<br />
in commercial properties<br />
Possible on model 500 Elegant, 600 Standard and<br />
900 Old Vienna:<br />
→ Stainless steel bearing. Door handle mounted<br />
for turning. This bearing combines a high quality<br />
commercial bearing with the appeal of a classic<br />
fitting and is thus particularly interesting in building<br />
renovations.<br />
Fire resistance fittings in accordance with<br />
ÖNORM B 3859<br />
Fire resistant fittings are supplied with steel insert in<br />
the plate or in the rose. For registration in accordance<br />
with ÖNORM see hanger / certificate.<br />
Spring assisted fittings are not available in fire resistant<br />
versions.<br />
90min<br />
ÖNORM<br />
B 3859<br />
88 <strong>Grundmann</strong> | WG | Fittings for House and Home
WG door handle connection Radial Plus | Assembly variation D | Classification tables<br />
WG door handle connection Radial Plus<br />
→ Optimal hold with large ring lifting screw M6 with<br />
threads that support more through side positioning<br />
of the screw.<br />
→ No loosening of the fixing screw because of bracing<br />
of handle pins (sprung screw load).<br />
→ No wobbling of the handle pin in the handle hole<br />
as the pin is effectively braced to three sides via an<br />
incline.<br />
→ Can be set to any increment and can be re-adjusted<br />
in the event of contraction of the door wood with a<br />
thread pin with lifting screw.<br />
→ Simple storage, as only a lengthened version must<br />
be stored, which can then be easily shortened as<br />
required.<br />
→<br />
→<br />
→<br />
lever handle<br />
EN 1906 Category of Use grade 3<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
Assembly variation D<br />
For door handles, key and<br />
cylinder roses (2x support «U»)<br />
For knob and<br />
WC roses<br />
(Support «T»)<br />
For knob and<br />
WC roses<br />
(Support «A»)<br />
Installation for D6 roses<br />
Screw connection using particleboard screws ø 4 mm (length according<br />
to door thickness). Available from 81 mm door thickness with fi re resistant<br />
rose supports with thread connection M4 (295UFH/295DUFH)<br />
Classification tables for residential fittings<br />
U-Universal bearing – classification key in accordance with EN 1906<br />
Item 1 2 3 4 5 6 7 8<br />
Use<br />
category<br />
Durability<br />
Door mass<br />
Fire<br />
resistance<br />
Security<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Standard | class 3 7 – 0 0 2 0 U<br />
Fire retardant | class 3 7 – 1 0 2 0 U<br />
WG slide bearing D70 for roses – classification key in accordance with EN 1906<br />
Item 1 2 3 4 5 6 7 8<br />
Use<br />
category<br />
Durability<br />
Door mass<br />
Fire<br />
resistance<br />
Securityt<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Standard | class 2 6 – 0 0 2 0 U<br />
Fire retardant | class 3 7 – 1 0 2 0 U<br />
Fittings with spring assistance – classification key in accordance with EN 1906<br />
Item 1 2 3 4 5 6 7 8<br />
Use<br />
category<br />
Durability<br />
Door mass<br />
Fire<br />
resistance<br />
Security<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Standard | class 2 6 – 0 0 2 0 A<br />
Stainless steel bearing – classification key in accordance with EN 1906<br />
Item 1 2 3 4 5 6 7 8<br />
Use<br />
category<br />
Durability<br />
Door mass<br />
Fire<br />
resistance<br />
Securityt<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Standard | class 3 7 – 0 0 2 0 U<br />
Fire retardant | class 3 7 – 1 0 2 0 U<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
89
WG classic Fittings for<br />
House and Home<br />
Model 500<br />
Elegant<br />
Originally, the turn of the century model Elegant<br />
was produced in brass by the so-called ‚Wiener<br />
Gelbgießer‘. In 1933 <strong>Grundmann</strong> started the<br />
industrial production of this model which was<br />
taken over by the subsidiary in Arad (Romania).<br />
There it continued to sell well, particulary in the<br />
former crown states. After WW2, it was only<br />
available in aluminium until the renovation of<br />
the Karl-Marx Höfe at the start of the 80s when it<br />
was once again produced in brass and used both<br />
for renovations and for use in modern residential<br />
construction. With this checkered history,<br />
this ‚Evergreen‘ model is still sought after by<br />
architects and private customers. The growing<br />
demand for silver surfaces was met with the<br />
model 552/562mH POL<br />
prices see page 294<br />
design being produced in polished aluminium,<br />
brass chrome plated and brass chrome plated<br />
satin finish.<br />
Design: GRUNDMANN<br />
(according to sketches dated<br />
from the late 19th century.)<br />
Technical details<br />
Lever handle model 500<br />
Finishes<br />
POL = aluminium extra bright<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
MS-PVD = brass zircon-nitride coated<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according to ÖNORM<br />
B 3859 and DIN 18273FS with a bearing<br />
suited for heavily frequented properties<br />
frontdoor-backplates are available on request<br />
with spring assistance<br />
Bearing for heavily frequented properties<br />
only for brass-sets - on request<br />
Backplates are available on request with a bearing<br />
made of stainless steel and prepared for a fixed-rotating-housed<br />
lever handle (= Category of use grade 3<br />
ÖNORM EN 1906)<br />
Tender text for fittings with a bearing suited for<br />
heavily frequented properties<br />
(Category of use grade 3, ÖNORM EN 1906)<br />
Lever handle sets (or entrance sets) model 500 with<br />
backplates and a bearing suited for heavily frequented<br />
properties. Fixed-rotating-housed lever handle;<br />
anti-loosening protected and fully adjustable lever<br />
handle connection with square spindle Radial-Plus<br />
II. Backplates with visible screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), e.g. 570/572Z MS<br />
with stainless steel bearing<br />
Tender text for fire retardant fittings with a bearing<br />
suited for heavily frequented properties<br />
(Category of use grade 3, ÖNORM EN 1906)<br />
Lever handle sets (or entrance sets) model 500<br />
with backplates and a bearing suited for heavily<br />
frequented properties. Fixed-rotating-housed lever<br />
handle; fire retardant checked ÖNORM B 3859 and<br />
DIN 18273FS for fire retardant doors, anti-loosening<br />
protected and fully adjustable lever handle connection<br />
with square spindle Radial-Plus II. Backplates<br />
with visible screws, suitable for profile cylinder<br />
installation, e.g. 552/562ZFH MS with stainless steel<br />
bearing.<br />
90 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 570/572Z MS<br />
for front doors<br />
model 544 POL<br />
for bathroom- and WCdoors<br />
model 664/562Z MS<br />
for entrance doors<br />
model 570/664Si/572ZEL MS<br />
for anti-burglary<br />
entrance doors<br />
see page 394<br />
Technical details<br />
Backplates model 562Z Lever handle model 552<br />
<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
<br />
<br />
<br />
<br />
664<br />
<br />
Standards for backplates model 500<br />
Distance E ÖNORM ÖN-FH DIN DIN-FH DIN 92 CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 72 92 78 78<br />
<br />
<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
664M<br />
<br />
Handle spindle 8,5 8,5 8 9 10** 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Backplate for front doors model 572Z Lever handle for front doors model 570<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
91
WG classic Fittings for<br />
House and Home<br />
Model 500<br />
Elegant<br />
The window furniture offering for casement windows<br />
and tilt & turn windows for the Model 500<br />
Elegant, our classic from the Viennese »gilded<br />
age« of the late 19th century, is more refined<br />
than that of any of our other models. This variety<br />
and richness of design detail has become a rarity<br />
in our practical and extremely cost-oriented age.<br />
However for those who love to renovate in rich<br />
detail, this slow world of the Model Elegant is a<br />
world they will be pleased to discover.<br />
Design: GRUNDMANN<br />
(based on old designs from the late<br />
19th century)<br />
model 504HA MS<br />
for door edge latches and<br />
tilt-and-turn hardware<br />
with 90° plastic latch<br />
prices see page 295<br />
Technical details<br />
Window pull model 504H with visible screws<br />
Window pull model 504HA with hidden screws<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finishes<br />
POL = aluminium extra bright<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
Finish on request<br />
MS-PVD = brass zircon-nitride coated<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
92 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 504 MS<br />
for double windows<br />
model 520 MS<br />
for double windows<br />
model 504H MS<br />
for door edge latches and<br />
tilt-and-turn hardware<br />
model 526 MS<br />
for double windows<br />
Technical details<br />
Window pulls model 526H, 526HA Window pulls model 504, 505<br />
<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Technical details<br />
Window pulls model 520/521 (with square pin 7x35 without gear) Window pulls model 526/527<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
93
WG classic Fittings for<br />
House and Home<br />
Model 600<br />
Standard<br />
Stylistically, this model originates from the<br />
so-called ‚early-modern‘ period of the 20s and<br />
30s. Similar forms can be found in the Viennese<br />
buildings of that period. Sadly, we do not know<br />
who developed the Standard design. Wilh.<br />
<strong>Grundmann</strong> included it in the production range<br />
in 1951. Of particular significance is the plate<br />
with four screws, one of the most beautiful on<br />
the market and perfectly designed for refurbishments<br />
which need to be elegant and representative.<br />
An example can be seen in the newly renovated<br />
Hofimmobiliendepot in Vienna. The design<br />
in polished aluminium is particulary suited for a<br />
completely different application area, modern<br />
residential buildings.<br />
model 652/662mH MS<br />
Design: GRUNDMANN<br />
prices see page 296<br />
Technical details<br />
Finishes<br />
POL = aluminium extra bright<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
Finish on request<br />
MS-PVD = brass zircon-nitride coated<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant<br />
according to ÖNORM B 3859<br />
Bearing for heavily frequented properties<br />
only for brass-sets - on request<br />
Backplates are available on request with a bearing<br />
made of stainless steel and prepared for a fixed-rotating-housed<br />
lever handle (= Category of use grade 3<br />
ÖNORM EN 1906)<br />
Tender text for fittings with a bearing suited for<br />
heavily frequented properties<br />
(Category of use grade 3, ÖNORM EN 1906)<br />
Lever handle sets (or entrance sets) model 600 with<br />
backplates and a bearing suited for heavily frequented<br />
properties. Fixed-rotating-housed lever handle;<br />
anti-loosening protected and fully adjustable lever<br />
handle connection with square spindle Radial-Plus<br />
II. Backplates with visible screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), e.g. 652/662Z MS<br />
with stainless steel bearing.<br />
Tender text for fire retardant fittings with a bearing<br />
suited for heavily frequented properties<br />
(Category of use grade 3, ÖNORM EN 1906)<br />
Lever handle sets (or entrance sets) model 600<br />
with backplates and a bearing suited for heavily<br />
frequented properties. Fixed-rotating-housed lever<br />
handle; fire retardant checked ÖNORM B 3859 and<br />
DIN 18273FS for fire retardant doors, anti-loosening<br />
protected and fully adjustable lever handle connection<br />
with square spindle Radial-Plus II. Backplates<br />
with visible screws, suitable for profile cylinder<br />
installation, e.g. 652/662ZFH MS with stainless steel<br />
bearing.<br />
94 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 652/D6/55 MS<br />
with round roses<br />
model 664a/662Z MS<br />
with knob-backplate<br />
model 604HA MS<br />
window pull with 90°<br />
plastic latch<br />
model 652/3254LSi/5762ZAS MS<br />
for anti-burglary<br />
front doors<br />
see page 355<br />
Technical details<br />
Lever handle model 652 (above, 670 (below)<br />
Backplate model 662Z<br />
22<br />
18 44<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
55<br />
108<br />
<strong>11</strong><br />
245<br />
223<br />
E 90<br />
ø45<br />
Fittings<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
22<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
42<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
60<br />
<strong>11</strong><br />
**) with compensating bush 8/10 square<br />
123<br />
37<br />
6<br />
27<br />
3.5x20<br />
Technical details<br />
Round roses model D6 (fitting variant D see page 89)<br />
Window pull model 604H, HA<br />
51<br />
46<br />
31<br />
ø10<br />
74<br />
ø45<br />
7<br />
8 19 8<br />
12<br />
ø8<br />
65<br />
43<br />
3<br />
35<br />
108<br />
43<br />
b 8,25 6,25 7,5<br />
38<br />
8<br />
ø8<br />
35<br />
22<br />
4x40<br />
SPAX (D6)<br />
4x40<br />
M4 (D6FH)<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
95
WG basic<br />
Fittings for<br />
House and Home<br />
Model 700<br />
Palatin<br />
Our brief to the designers was to create a model<br />
that can be produced as economically as possible,<br />
with a form for right-handed and left-handed<br />
parts and for window furniture. Gottfried Palatin<br />
brilliantly mastered the assigned task. The model<br />
lives in the tension between round and straight<br />
forms and it is perfect solution from the front as<br />
well viewed from the top.<br />
Design: Gottfried Palatin<br />
Winner of the «Lower Austrian State Award of<br />
Merit for Artistic Design» in 1998.<br />
model 752/D70/55Z F1-SAT<br />
prices see page 316<br />
Matching anti-burglary series<br />
see page 298 and the following<br />
window pull<br />
model 704HA F1-SAT<br />
with 90° plastic latch<br />
prices see page 298<br />
Technical details<br />
Window pull model 704H, HA<br />
ø10<br />
74<br />
7<br />
3<br />
35<br />
<strong>11</strong>8<br />
b 8,25 6,25<br />
Finish<br />
F1-SAT = aluminium silver anodized satin finish<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 2 and 3 (for fire retardant fittings)<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
roses D70 and backplate 1762(Z) on request<br />
with spring-assistance (H)<br />
96 <strong>Grundmann</strong> | WG | Fittings for House and Home
Model 752/1762Z F1-SAT<br />
770/664aSi/5362 ZAS-K F1-SAT<br />
Matching anti-burglary series<br />
see page 359 and the following<br />
Technical details<br />
Lever handle model 752 Roses model D70, D70FH (assembly variant D see page 89)<br />
38<br />
ø 21<br />
38<br />
ø7<br />
WG-<br />
WOHNBAU-<br />
BESCHLÄGE<br />
ø7 (ø8)<br />
7(8) 15 (5)<br />
60<br />
ø7(-)<br />
5 (-)<br />
<strong>11</strong>8<br />
numbers between<br />
parenthesis:<br />
Werte in Klammer<br />
for für D70FH-rose D70FH-Rosette<br />
ø<br />
b<br />
45<br />
7<br />
ø45<br />
15<br />
Rose height:<br />
D70: 7 mm<br />
D70FH: 7 mm<br />
Rose diameter ø:<br />
D70: 50 mm<br />
D70FH: 50 mm<br />
4x40<br />
4x40<br />
35<br />
SPAX (D70) M4 (D70FH)<br />
43<br />
Technical details<br />
Lever handle model 752<br />
backplate model 1762Z<br />
b 8,25 6,25 7,5<br />
44<br />
Fittings<br />
ø22<br />
228<br />
195<br />
E 81<br />
ø45<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
60<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<strong>11</strong>8<br />
43<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
42<br />
8<br />
27<br />
3.5x20<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home 97
WG classic Fittings for<br />
House and Home<br />
Model 900<br />
Alt-Wien<br />
This model is one of the most successful designs<br />
of the Viennese “Gründerzeit” (Age of Promotorism)<br />
and the brass foundries produced it in<br />
countless variants and sizes. 100 years later this<br />
form was rediscovered with the brass boom<br />
of the 1980s. We have invested a lot of time in<br />
researching original patterns in order to offer<br />
a new edition that is as true to the original as<br />
possible. This love of detail paid off. Although<br />
Alt-Wien model was only included in our product<br />
line in 1992, it quickly developed into a genuine<br />
classic.<br />
Design: GRUNDMANN<br />
(based on old designs from the<br />
model 952/962 MS-PVD<br />
prices see page 299<br />
late 19th century)<br />
model 952/948S/955S MS<br />
prices see roses<br />
page 299 and 322<br />
Technical details<br />
Finishes<br />
MS = brass extra bright<br />
MS-PVD = brass zircon-nitride coated<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
MS-N = brass extra bright unlacquered<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
<br />
<br />
Fire retardant according to ÖNORM<br />
B 3859 and DIN 18273FS with a bearing<br />
suited for heavily frequented properties<br />
frontdoor-backplates are available on request<br />
with spring assistance<br />
Bearing for heavily frequented properties<br />
only for brass-sets - on request<br />
Backplates are available on request with a bearing<br />
made of stainless steel and prepared for a fixed-rotating-housed<br />
lever handle (= Category of use grade 3<br />
ÖNORM EN 1906)<br />
Tender text for fittings with a bearing suited for<br />
heavily frequented properties<br />
(Category of use grade 3, ÖNORM EN 1906)<br />
Lever handle sets (or entrance sets) model 900 with<br />
backplates and a bearing suited for heavily frequented<br />
properties. Fixed-rotating-housed lever handle;<br />
anti-loosening protected and fully adjustable lever<br />
handle connection with square spindle Radial-Plus<br />
II. Backplates with visible screws, suitable for profile<br />
cylinder installation (or with bit keyhole or red/white<br />
display and emergency release), e.g. 970/972Z MS<br />
with stainless steel bearing.<br />
Tender text for fire retardant fittings with a bearing<br />
suited for heavily frequented properties<br />
(Category of use grade 3, ÖNORM EN 1906)<br />
Lever handle sets (or entrance sets) model 900<br />
with backplates and a bearing suited for heavily<br />
frequented properties. Fixed-rotating-housed lever<br />
handle; fire retardant checked ÖNORM B 3859 and<br />
DIN 18273FS for fire retardant doors, anti-loosening<br />
protected and fully adjustable lever handle connection<br />
with square spindle Radial-Plus II. Backplates<br />
with visible screws, suitable for profile cylinder<br />
installation, e.g. 970/972ZFH MS with stainless steel<br />
bearing.<br />
98 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 944 MS-PVD<br />
for bathroom and WC-doors<br />
model 964/962Z MS-PVD<br />
for entrance doors<br />
model 970/972Z MS-PVD<br />
for front doors<br />
model 970/964Si/972 ZEL MS-PVD<br />
for anti-burglary<br />
entrance doors<br />
see page 364<br />
Technical details<br />
Backplate model 962Z Lever handle model 952<br />
<br />
<br />
<br />
<br />
<br />
964<br />
<br />
<br />
Standards for backplates model 900<br />
Distance E ÖNORM ÖN-FH DIN DIN-FH DIN 92 CH-NORM CH-FH<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 88 72 72 92 78 78<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
<br />
<br />
For round cylinder 90 90 74 74 78 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
<br />
<br />
<br />
964M<br />
Handle spindle 8,5 8,5 8 9 10** 8 9<br />
*) with compensating bush 7/8 square, **) with compensating bush 8/10 square<br />
Technical details<br />
Backplate model 972Z<br />
Lever handle for front doors model 970 (fire retardant)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
99
WG classic Fittings for<br />
House and Home<br />
Model 900<br />
Alt-Wien<br />
In addition to the Model 500 Elegant, the Model<br />
900 Alt-Wien is the second lever handle model in<br />
our product line that provides a similar extensive<br />
offering of matching window furniture. Since<br />
casement windows these days are generally sold<br />
for renovations this product line has become<br />
something for specialists and enthusiasts. However<br />
those who want this classic Viennese design in<br />
a modern structure can order Model 904HA with<br />
90° engagement mechanisms for double-glazed<br />
windows.<br />
Design: GRUNDMANN<br />
(based on old designs from the<br />
late 19th century)<br />
model 904HA MS<br />
with 90° latch<br />
for door edge latches and<br />
tilt-and-turn hardware<br />
prices see page 300<br />
Technical details<br />
Window pull model 904HA, HO with hidden screws<br />
Window pull model 904H with visible screws<br />
34<br />
ø10<br />
70<br />
<br />
<br />
78<br />
43<br />
<br />
<br />
7<br />
<br />
5<br />
35<br />
<strong>11</strong>0<br />
<br />
<br />
<br />
Finishes<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
Finish on request<br />
MS-PVD = brass zircon-nitride coated<br />
HO = without supporting extensions<br />
HA = with supporting extensions<br />
100 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 904 MS<br />
for double windows<br />
model 920 MS-Cr<br />
for double windows<br />
model 926 MS<br />
for double windows<br />
Technical details<br />
Window pull model 904<br />
Window pull model 920/921 (with square spindle 7x35 without gear)<br />
<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Technical details<br />
Window pull model 926<br />
<br />
<br />
<br />
<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
101
WG classic Fittings for<br />
House and Home<br />
Model 1000<br />
Favorit<br />
In 1957 Ernst Oskwarek designed the Favorit<br />
model that became one of the greatest sales<br />
successes in the history of our company. In its<br />
heyday it enjoyed a market share of close to<br />
80% of the Austrian market – a success story<br />
that is almost inconceivable today in light of<br />
the differentiated product offering. However<br />
it is not just the market conditions that were<br />
different in those days. The model Favorit was<br />
pure Zeitgeist; it represented the so-called «2nd<br />
Modern» of the post war era. As unbelievable as<br />
it sounds: Advertisements advised customers to<br />
remove the Alt-Wien model and to screw on the<br />
silver Favorit model with its streamlined form.<br />
Of course today we would never come up with<br />
that kind of ad copy. Nevertheless this form has<br />
become current again with the revival of designs<br />
model 1052/1062 POL<br />
prices see page 301<br />
Matching anti-burglary series<br />
see page 330 and the following<br />
from the 50s and 60s.<br />
.<br />
Design: ERNST OSKWAREK<br />
Technical details<br />
Backplate model 1062Z Lever handle model 1052<br />
<br />
<br />
Fittings<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
<br />
<br />
<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
<br />
<br />
For round cylinder 90 74 94 78<br />
<br />
<br />
<br />
664a<br />
<br />
<br />
<br />
<br />
664aM<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
<br />
<br />
<br />
<br />
Finishes<br />
POL<br />
F1-SAT<br />
F2<br />
= aluminium extra bright<br />
= aluminium silver anodized satin finish<br />
= aluminium new silver anodized<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
102 <strong>Grundmann</strong> | WG | Fittings for House and Home<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859
model 1052/D6/55 F1-SAT<br />
with round roses<br />
model 1004R F2<br />
for double windows<br />
model 1020 F2<br />
for double windows<br />
Technical details<br />
Lever handle model 1052 Rose model D6 or D6FH (assembly variant D see p. 89)<br />
Window pull model 1004L/R<br />
51<br />
ø45<br />
46<br />
<br />
<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
<br />
8 19 8<br />
12<br />
<br />
<br />
<br />
ø8<br />
43<br />
<br />
<br />
38<br />
b<br />
8<br />
ø8<br />
35<br />
<br />
<br />
<br />
<br />
4x40<br />
4x40<br />
b 8,25 6,25 7,5<br />
SPAX (D6) M4 (D6FH)<br />
Technical details<br />
Window pull model 1020 (with square spindle 7x35 without gear) Window pull model 1026<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
103
WG classic Fittings for<br />
House and Home<br />
Model <strong>11</strong>00<br />
Servus<br />
The boom in residential building in the early<br />
90s in Vienna inspired us, in collaboration with<br />
Michael Schaefer, to give some thought to an<br />
aluminum fitting with the working name of<br />
«Freundschaft» (Friendship). The result was the<br />
Model <strong>11</strong>00 that was eventually given the Austrian<br />
greeting «Servus» as its name. Characteristic<br />
for this lever handle is its diagonally positioned,<br />
elliptical cross-section that swings out from door<br />
in a generous contour and then tapers to a radial<br />
turn. When grasped this special form communicates<br />
a feel that is similar to a good handshake.<br />
model <strong>11</strong>52/D6/55 F1-SAT<br />
prices see page 302<br />
Design:<br />
SCHAEFER-DESIGN<br />
iF-Design Prize 1996<br />
Technical details<br />
Lever handle model <strong>11</strong>52 Roses model D6 (assembly variant »D» for D6-roses see page 89)<br />
51<br />
46<br />
ø45<br />
4x40<br />
4x40<br />
8 19 8<br />
12<br />
SPAX (D6)<br />
M4 (D6FH)<br />
60<br />
45<br />
ø8<br />
135<br />
38<br />
b<br />
8<br />
ø8<br />
34<br />
b 8,25 6,25<br />
Finish<br />
F1-SAT = aluminium silver anodized satin finish<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
104 <strong>Grundmann</strong> | WG | Fittings for House and Home
model <strong>11</strong>52/1762 F1-SAT<br />
model <strong>11</strong>52/664aSi/5362ZAS-K F1-SAT<br />
for anti-burglary entrance doors<br />
see page 358<br />
Technical details<br />
Lever handle model <strong>11</strong>52<br />
backplate model 1762Z<br />
<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
60<br />
<br />
<br />
<br />
<br />
<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
135<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
<br />
<br />
<br />
<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
105
WG home-office Fittings for<br />
House and Home<br />
Model 1500<br />
WG<br />
Model 1500 is a sympathetic and attentive office<br />
colleague. Its elegant tapering handle shows good<br />
taste and restraint. Only when it is grasped do you<br />
feel how attentive and present the gentle convexity<br />
on the inside handle of the lever fits in your hand.<br />
Have you perhaps underestimated it?<br />
Design:<br />
GOTTFRIED PALATIN<br />
model 1552/D6/55Z F1-SAT<br />
prices see page 303<br />
matching anti-burglary<br />
series see page 330 and<br />
the following<br />
window pull<br />
model 1504HA F1-SAT<br />
with 90° latch<br />
prices see page 303<br />
Technical details<br />
Lever handle model 1552 (FH) Rose model D6 (assembly variant »D» for D6-roses see page 89) Window pull model 1504H, HA<br />
56 8<br />
42<br />
ø<br />
ø45<br />
68<br />
65<br />
43<br />
31<br />
ø10<br />
7<br />
ø13<br />
71<br />
12<br />
136<br />
4x40<br />
SPAX (D6)<br />
8 19 8<br />
12<br />
ø8<br />
45<br />
3<br />
6<br />
35<br />
136<br />
b 8,25 6,25<br />
38<br />
4x40<br />
M4 (D6FH)<br />
8<br />
ø8<br />
34<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
42<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
Window pulls - attention: distance from outer edge<br />
of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
106 <strong>Grundmann</strong> | WG | Fittings for House and Home
WG home-office Fittings for<br />
House and Home<br />
Model 1600<br />
WG<br />
In spite of its strict functionality or perhaps<br />
because of this extremely reduced language of<br />
form the model has been well established itself<br />
in the market for many years. A simple round<br />
tube bent once in a simple swing, a form that<br />
does no more, and does not want to do anything<br />
more than perform its function; something for<br />
purists.<br />
Design: GRUNDMANN<br />
model 1652/D6/55Z F1-SAT<br />
prices see page 303<br />
matching anti-burglary<br />
series see page 330 and<br />
the following<br />
window pull<br />
model 1604HA F1-SAT<br />
with 90° latch<br />
prices see page 303<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
Technical details<br />
Lever handle model 1652 (FH) Roses model D6 (assembly variant »D» for D6-roses see page 89) Window pull model 1604H, HA<br />
8<br />
62<br />
ø 20<br />
ø<br />
ø45<br />
68<br />
31<br />
7<br />
ø13<br />
ø10<br />
77<br />
127<br />
8 19 8<br />
12<br />
65<br />
43<br />
b 8,25 6,25<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
38<br />
4x40<br />
SPAX (D6)<br />
4x40<br />
M4 (D6FH)<br />
8<br />
ø8<br />
ø8<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
34<br />
45<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
3<br />
6<br />
35<br />
127<br />
Window pulls - attention: distance from outer edge<br />
of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
107
Fittings for House and Home<br />
WG basic | WG home-office<br />
Model 1700(L)<br />
WG<br />
The round tube classic from the 1970s is not only<br />
a bestseller in the GEOS product line, but it is<br />
also a popular choice for housing developments<br />
in a somewhat narrower L-design and with bearings<br />
that are well adapted to the loads prevailing<br />
in this application. The safety factor and functionality<br />
of this form are as impressive today as they<br />
were then.<br />
However if you would like to use higher quality<br />
materials, such as brass or stainless steel, in<br />
residential building then we can offer you the<br />
somewhat larger Model 1752.<br />
Design: GRUNDMANN<br />
model 1752L/D70/55Z F1-SAT<br />
prices see page 304<br />
Technical details<br />
Lever handle model 1752 Rose model D6 and D6FH (assembly variant »D» for D6-roses see page 89)) Pull handle model 1704H, HA<br />
8<br />
62<br />
ø20<br />
140<br />
b 8,25 6,25 7,5<br />
53<br />
ø<br />
38<br />
ø45<br />
4x40<br />
SPAX (D6)<br />
4x40<br />
M4 (D6FH)<br />
68<br />
8<br />
8 19 8<br />
12<br />
ø8<br />
ø8<br />
34<br />
45<br />
65<br />
43<br />
31<br />
7<br />
ø10<br />
ø13<br />
3<br />
6<br />
35<br />
77<br />
12<br />
140<br />
Finishes model 1700 and 1700L<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
Finishes model 1700<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 2 and 3 (fire retardant fittings)<br />
ÖNORM EN 1906<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
D70-roses and backplates 1762(Z) available on<br />
request with spring assistance (H)<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
108 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 1752L/1762Z F1-SAT<br />
for interior doors<br />
model 1744 F2<br />
for bathroom and WC doors<br />
model 1704LHA F1-SAT<br />
with 90° latch<br />
for door edge latches and<br />
tilt-and-turn hardware<br />
mode l 1752L/664aSi/5362ZAS F2<br />
for anti-burglary entrance doors<br />
see page 352<br />
prices see page 304<br />
Technical details<br />
Lever handle model 1752L Rose model D70 and D70FH (assembly variant »D» for roses see page 89) Pull handle model 1704LH, HA<br />
ø7 (ø8)<br />
38<br />
ø7(-)<br />
ø19<br />
38<br />
ø7<br />
15<br />
<br />
<br />
<br />
<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
15 (5)<br />
7 (8)<br />
5 (-)<br />
45<br />
53<br />
7<br />
<br />
<br />
figures in brackets<br />
for D70FH-rose<br />
8.25<br />
ø45<br />
<br />
<br />
<br />
130<br />
ø<br />
35<br />
4x40 4x40<br />
SPAX (D70) M4 (D70FH)<br />
Rose diameter ø: 50 mm<br />
43<br />
Window pulls - attention: distance from outer<br />
edge of the profile to the gear > 6mm<br />
Technical details<br />
Lever handle model 1752L (1752FH)<br />
Backplate model 1762Z<br />
44<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
ø19<br />
ø20 (1752FH)<br />
228<br />
195<br />
E 81<br />
ø45<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
8,5<br />
53, 60 (1752FH)<br />
130, 140 (1752FH)<br />
42<br />
3.5x20<br />
8<br />
27<br />
43<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
109
WG basic<br />
Fittings for<br />
House and Home<br />
Model 2000<br />
WG<br />
Similar to the Model Favorit in the 1960s the<br />
Model 2000 from the 1980s<br />
has been used extensively in housing developments.<br />
The ergonomically mature design makes<br />
this form ideally suitable for everyday life as a<br />
lever handle. Moreover – and this is not insignificant<br />
for the application area -<br />
this is really an «inexpensive» lever handle.<br />
Design:<br />
GRUNDMANN<br />
model 2052/762 F2<br />
prices see page 306<br />
Technical details<br />
Finish<br />
F2 = aluminium new silver anodized<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
<strong>11</strong>0 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 2052/D70/55Z F2<br />
mode l 2052/664aSi/5862ZAM/15 F2<br />
for anti-burglary entrance doors<br />
see page 328<br />
Technical details<br />
Lever handle model 2052 Rose model D70, D70FH( assembly variant »D» for D6-roses see page 89)<br />
38<br />
38<br />
ø7<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
ø7 (ø8)<br />
ø7(-)<br />
15<br />
15 (5)<br />
7 (8)<br />
52<br />
5 (-)<br />
figure in brackets<br />
for D70FH-rose<br />
8.25<br />
45<br />
7<br />
ø45<br />
<strong>11</strong>5<br />
50<br />
35<br />
4x40 4x40<br />
SPAX (D70) M4 (D70FH)<br />
43<br />
b 8,25 6,25 7,5<br />
Technical details<br />
Lever handle model 2052<br />
Backplate model 762Z<br />
44<br />
28<br />
7<br />
45<br />
Standards<br />
210<br />
194<br />
E 74<br />
43<br />
664a<br />
ø45<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
52<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
<strong>11</strong>5<br />
**) with compensating bush 8/10 square<br />
37<br />
34<br />
3.5x20<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
<strong>11</strong>1
WG home-office Fittings for<br />
House and Home<br />
Model 2100<br />
City<br />
New manufacturing technologies also permit<br />
stainless steel fittings; for some time these were<br />
considered to represent a breaking away from conventional<br />
form specifications. The designer used<br />
the new possibilities and presented a concept that<br />
convinced all of us straightaway: The basic idea<br />
was characterized by a round neck resting within<br />
itself that transitions to a flat sympathetic handle<br />
with an end that has been pressed into an oval. This<br />
gives the lever handle a tapering dynamic swing<br />
to the door.<br />
Design: SCHAEFER-DESIGN<br />
model 2152/D6/55Z E-POL<br />
prices see page 307<br />
matching anti-burglary<br />
series see page 330 and<br />
the following<br />
window pull<br />
model 2104HA F1-SAT<br />
with 90° latch<br />
prices see page 307<br />
Technical details<br />
Lever handle model 2152 Roses model D6 and D6FH (assembly variant »D» for D6-roses see page 89) Window pull model 2104H, HA<br />
68<br />
ø<br />
31<br />
76<br />
62 8<br />
ø 20<br />
150<br />
b 8,25 6,25<br />
52<br />
38<br />
ø45<br />
4x40<br />
SPAX (D6)<br />
4x40<br />
M4 (D6FH)<br />
8<br />
8 19 8<br />
12<br />
ø8<br />
ø8<br />
34<br />
45<br />
65<br />
43<br />
7<br />
ø13<br />
ø 10<br />
3<br />
6<br />
35<br />
150<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
Window pulls - attention: distance from outer edge<br />
of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>11</strong>2 <strong>Grundmann</strong> | WG | Fittings for House and Home
WG home-office Fittings for<br />
House and Home<br />
Model 2200<br />
WG<br />
A high oval lever handle that tapers slightly – this<br />
is a simple description of the Model 2200. This<br />
discretely elegant design makes the Model 2200<br />
a secret tip for all those who do not want to make<br />
a statement with forms that are too expressive,<br />
but who nevertheless want to choose something<br />
beyond the usual.<br />
Design: GRUNDMANN<br />
model 2252/D6/55Z F1-SAT<br />
prices see page 308<br />
Matching anti-burglary<br />
series see page 330 and<br />
the following<br />
window pull<br />
model 2204HA F1-SAT<br />
with 90° latch<br />
prices see page 308<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
Technical details<br />
Lever handle model 2252 Roses model D6 and D6FH (assembly variant »D» for D6-roses see page 89) Window pull model 2204H, HA<br />
ø<br />
68<br />
8<br />
ø45<br />
31<br />
38<br />
4x40<br />
M4 (D6FH)<br />
4x40<br />
SPAX (D6)<br />
8<br />
8 19 8<br />
12<br />
ø8<br />
ø8<br />
34<br />
45<br />
7<br />
ø10<br />
73<br />
60<br />
<strong>11</strong><br />
b 8,25 6,25<br />
136<br />
42<br />
65<br />
43<br />
3<br />
35<br />
12<br />
<strong>11</strong><br />
136<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
42<br />
Window pulls - attention: distance from outer edge<br />
of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
<strong>11</strong>3
8<br />
WG home-office Fittings for<br />
House and Home<br />
Model 2300<br />
Ulm<br />
We added this model to our product line in the<br />
early seventies at the suggestion of a Swiss<br />
customer. Because the Swiss Railways used<br />
a very similar model, it became known as the<br />
»Swiss Railways door lever«. The form became<br />
famous through a concept by the architect Max<br />
Bill, who further developed this design for the<br />
Ulm College of Art.<br />
Design: GRUNDMANN (based on a concept for<br />
the Swiss Railway)<br />
model 2352/D6/55Z F1-SAT<br />
prices see page 309<br />
matching anti-burglary<br />
series see page 328 and<br />
the following<br />
window pull<br />
model 2304HA F1-SAT<br />
with 90° latch<br />
prices see page 309<br />
Technical details<br />
Lever handle model 2352 Roses model D6 and D6FH (assembly variant »D» for D6-roses see page 89) Window pull model 2304H, HA<br />
62<br />
ø 21<br />
133<br />
44<br />
ø<br />
ø45<br />
4x40<br />
M4 (D6FH)<br />
68<br />
8 19 8<br />
12<br />
ø8<br />
65<br />
43<br />
31<br />
7<br />
ø10<br />
3<br />
35<br />
75<br />
ø21<br />
133<br />
45<br />
b 8,25 6,25 7,5<br />
38<br />
b<br />
4x40<br />
SPAX (D6)<br />
8<br />
ø8<br />
34<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>11</strong>4<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home
WG home-office Fittings for<br />
House and Home<br />
Model 2500<br />
Integer<br />
An L-shaped mitred and welded round tube made<br />
of stainless steel is probably the most timeless of all<br />
forms and presumably this is why it is also so popular<br />
with architects. We have carried this design<br />
in our product line since 1995; stylistically this<br />
model that is popular throughout the industry can<br />
be considered «Early Modern». Thus it is the most<br />
modern of the classic lever handles.<br />
Since this form is designed with such purity,<br />
particular value must be placed on execution of<br />
the details. Particular value is placed on a precise<br />
weld seam in the mitre and a cleanly worked lever<br />
handle end.<br />
Design: GRUNDMANN<br />
model 2552/D6/55Z E-POL<br />
prices see page 310<br />
matching anti-burglary<br />
series see page 328 and<br />
the following<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
window pull<br />
model 2504HA F1-SAT<br />
with 90° latch<br />
prices see page 310<br />
Technical details<br />
Lever handle model 2552 Roses model D6 and D6FH (assembly variant »D» for D6-roses see page 89) Window pull model 2504H, HA<br />
68<br />
ø<br />
31<br />
75<br />
8<br />
62<br />
ø20<br />
130<br />
b 8,25 6,25 7,5<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
38<br />
ø45<br />
4x40<br />
M4 (D6FH)<br />
4x40<br />
SPAX (D6)<br />
8<br />
8 19 8<br />
12<br />
ø8<br />
ø8<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 3<br />
ÖNORM EN 1906<br />
34<br />
45<br />
65<br />
43<br />
Rose diameter ø:<br />
D6FH: 51 mm/aluminium<br />
D6FH: 50 mm/stainless steel<br />
7<br />
ø20<br />
ø13<br />
ø 10<br />
3<br />
6<br />
35<br />
130<br />
Window pulls - attention: distance from outer edge<br />
of the profile to the gear > 6mm<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
<strong>11</strong>5
WG basic Fittings for<br />
House and Home<br />
Model 7000<br />
Lilly<br />
The following three models in the 7000 series<br />
have been presented with the motto “Straightforward<br />
and fun-loving”. These are slender, contemporary<br />
forms that are versatile in implementation.<br />
The Lilly model has a linear and severe<br />
effect from the front, however viewed from<br />
above it is characterized by a slight swing. Precisely<br />
this balanced combination of the two forms<br />
is the characteristic feature of the design.<br />
Design: THESEVENHINTS<br />
model 7052/D70/55 F1-SAT<br />
prices see page 3<strong>11</strong><br />
window pull 7004HA F1-SAT<br />
with 90° latch<br />
prices see page 3<strong>11</strong><br />
Technical details<br />
Window pull model 7004H, HA<br />
31<br />
ø10<br />
66<br />
65<br />
43<br />
7<br />
5<br />
35<br />
129<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 2 and 3 (fire retardant fittings)<br />
ÖNORM EN 1906<br />
spring assistance available on request.<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>11</strong>6 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 7052/1762 F1-SAT<br />
mode l 7052/3254LSi/5362ZA F1-SAT<br />
for anti-burglary entrance doors<br />
see page 336<br />
Technical details<br />
Lever handle model 7052 Roses model D70, D70FH (assembly variant »D» see page 89)<br />
ø7 (ø8)<br />
15<br />
(5)<br />
60<br />
7(8)<br />
38<br />
ø7 (-)<br />
5(-)<br />
figures in brackets<br />
for Werte D70FH-rose in Klammer<br />
für D70FH-Rosette<br />
45<br />
7 15<br />
ø7<br />
38<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
129<br />
b<br />
ø45<br />
D70: D70FH:<br />
4x45<br />
SPAX<br />
4x40<br />
M4<br />
50<br />
34<br />
43<br />
b 8,25 6,25 7,5<br />
Technical details<br />
Lever handle model 7052<br />
Backplate model 1762Z<br />
46<br />
53 ø21<br />
228<br />
195<br />
E 81<br />
43<br />
ø45<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
129<br />
42<br />
8<br />
27<br />
3.5x20<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
<strong>11</strong>7
WG basic Fittings for<br />
House and Home<br />
Model 7200<br />
Sissy<br />
Sissy communicates a feeling of sensuality and<br />
formal virtue in the best sense of the terms.<br />
And always displays an excellent character in the<br />
most various tasks – combined with rose or plate or<br />
as window fitting turned 90°.<br />
Design: THESEVENHINTS<br />
model 7252/D70/55 F1-SAT<br />
prices see page 312<br />
model 7204HA F1-SAT<br />
with 90° latch<br />
prices see page 312<br />
Technical details<br />
Window pull model 7204HA<br />
31<br />
ø10<br />
66<br />
65<br />
43<br />
7<br />
5<br />
35<br />
125<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 2 and 3 (fire retardant fittings)<br />
ÖNORM EN 1906<br />
spring assistance available on request.<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
<strong>11</strong>8 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 7252/1762 F1-SAT<br />
model 7252/3264GSi/5362ZA3 F1-SAT<br />
for anti-burglary entrance doors<br />
see page 340<br />
Technical details<br />
Lever handle model 7252 Roses model D70, D70FH (assembly variant »D» see page 89)<br />
ø7 (ø8)<br />
38<br />
ø7 (-)<br />
ø7<br />
38<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
15<br />
(5)<br />
60<br />
7 (8)<br />
5(-)<br />
b<br />
figures Werte in in brackets Klammer for<br />
D70FH-rose<br />
für D70FH-Rosette<br />
45<br />
7 15<br />
ø45<br />
125<br />
50<br />
D70: D70FH:<br />
4x45<br />
SPAX<br />
4x40<br />
M4<br />
34<br />
43<br />
Technical details<br />
Lever handle model 7252<br />
Backplate model 1762Z<br />
46<br />
ø21<br />
228<br />
195<br />
E 81<br />
ø45<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
43<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
53<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
125<br />
42<br />
8<br />
27<br />
3.5x20<br />
**) with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
<strong>11</strong>9
WG basic Fittings for<br />
House and Home<br />
Model 7300<br />
Felix<br />
«Felix» represents fresh, uncomplicated lifestyle<br />
- modern and unaffected and yet expressive and<br />
inviting. The model demonstrates charm with the<br />
small finger recesses in the inner portion, a charm<br />
which you really only recognize when you grasp it.<br />
Design: THESEVENHINTS<br />
model 7352/D70/55 F1-SAT<br />
prices see page 313<br />
matching anti-burglary<br />
series see page 328 and<br />
the following<br />
model 7304HA F1-SAT<br />
with 90° latch<br />
prices see page 313<br />
Technical details<br />
Window pull model 7304HA<br />
31<br />
ø10<br />
66<br />
65<br />
43<br />
7<br />
5<br />
35<br />
122<br />
19<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Category of use<br />
grade 2 and 3 (fire retardant fittings)<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
120 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 7352/1762Z F1-SAT<br />
Technical details<br />
Lever handle model 7352 Roses model D70, D70FH (assembly variant »D» see page 89)<br />
ø7(ø8)<br />
60<br />
7 (8) 15<br />
(5)<br />
38<br />
ø7<br />
ø7 (-)<br />
5 (-)<br />
b<br />
figures Werte in in brackets Klammer<br />
for für D70FH-rose D70FH-Rosette<br />
45<br />
7 15<br />
ø7<br />
38<br />
ø45<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
19<br />
122<br />
50<br />
34<br />
43<br />
D70: D70FH:<br />
4x45<br />
4x40<br />
Technical details<br />
Lever handle model 7352<br />
SPAX<br />
M4<br />
Backplate model 1762Z<br />
b 8,25 6,25 7,5<br />
46<br />
ø20<br />
228<br />
195<br />
E 81<br />
ø45<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
53<br />
19<br />
43<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
122<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
42<br />
8<br />
27<br />
3.5x20<br />
**) with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
121
WG basic Fittings for<br />
House and Home<br />
Model 18000<br />
WG<br />
There is a stainless steel boom in the fittings<br />
industry and an ever-present market demand for<br />
new forms and variations. This model represents<br />
a cross between a straight cylindrical neck and a<br />
diagonally positioned elliptical handle. We are of<br />
the opinion that it looks quite chic.<br />
Design: GRUNDMANN<br />
model 18052H/D70H/55 E-SAT<br />
prices see page 314<br />
matching anti-burglary<br />
series see page 332 and<br />
the following<br />
window pull<br />
model 18004RHA E-SAT<br />
with 90° latch<br />
prices see page 314<br />
Technical details<br />
Window pull model 18004L/RH, HA<br />
31<br />
72<br />
65<br />
43<br />
7<br />
ø 10<br />
35<br />
3<br />
123<br />
19<br />
Finish<br />
E-SAT = stainless steel satin finish<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
as standard with<br />
spring assistance (H)<br />
Category of use<br />
grade 2 and 3 (fire retardant fittings)<br />
ÖNORM EN 1906<br />
H = without supporting extensions<br />
HA = with supporting extensions<br />
122 <strong>Grundmann</strong> | WG | Fittings for House and Home
model 18052/1762Z E-SAT<br />
modell 18052/3264GSi/5962ZA E-SAT<br />
for anti-burglary entrance doors<br />
see page 336<br />
Technical details<br />
Lever handle model 18052 Roses model D70, D70FH (assembly variant »D» see page 89)<br />
links left<br />
rechts right<br />
ø7 (ø8)<br />
38<br />
ø7 (-)<br />
right rechts<br />
46<br />
8 15<br />
ø7<br />
38<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
15 (5)<br />
5 (-)<br />
ø45<br />
67<br />
(8)<br />
7<br />
figures Werte in in Klammer brackets<br />
for<br />
für<br />
D70FH-rose<br />
D70FH-Rosette<br />
b<br />
45<br />
45<br />
19<br />
34<br />
123<br />
50<br />
45<br />
D70: D70FH:<br />
4x45<br />
4x40<br />
Technical details<br />
Backplate model 1762Z<br />
SPAX<br />
M4<br />
b 8,25 6,25 7,5<br />
46<br />
59<br />
figures in brackets<br />
Werte in Klammer<br />
for für D70FH-Rosette<br />
D70FH-rose<br />
228<br />
195<br />
E 81<br />
ø45<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
19<br />
45<br />
Handle spindle 8,5 8 10** 8<br />
123<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
42 8 26<br />
3.5x20<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
123
WG Fittings for House and Home<br />
Knobs<br />
WG<br />
In the Anglo-Saxon area the knob plays a much<br />
more prominent role than it does with us for<br />
opening and closing doors. We prefer the handle<br />
lever, which ergonomically is much more<br />
sophisticated. But these small spherical door<br />
openers are pretty and consequently we have<br />
consistently studied this theme. By the way our<br />
knobs can be ordered in designs that turn. With<br />
a turning doorknob it’s OK if you forget your key<br />
model 3154a F1-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 317<br />
on occasion.<br />
Design: GRUNDMANN,<br />
SCHAEFER-DESIGN<br />
model 3254L F1-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 317<br />
Technical details<br />
Knob model 664a Knob model 664aM Knob model 3154a Knob model 3254L<br />
23<br />
ø23<br />
ø45<br />
35<br />
ø21<br />
ø23<br />
ø49<br />
38<br />
ø50<br />
ø45<br />
60<br />
16 39<br />
Finishes<br />
POL = aluminium extra bright<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
P-BE = aluminium powder coated<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Knob 3154a: F1-SAT, P-BE, MS, E-POL, E-SAT<br />
Knopf 3254L: F1-SAT, P-BE, E-POL, E-SAT<br />
Knob 664a: POL, F1-SAT, F2, P-BE,MS, MS-N,<br />
MS-Cr, MS-Cr-SAT, E-POL, E-SAT<br />
Knob 664aM: POL, F1-SAT,F2<br />
Knob 664: POL, MS, MS-N, MS-Cr, MS-Cr-SAT<br />
Knob 674: POL, MS-PVD, MS-N, MS-Cr, MS-Cr-SAT<br />
Knob 664M: POL, MS, MS-N, MS-Cr, MS-Cr-SAT<br />
Knob 964: MS, MS-N, MS-PVD, MS-Cr, MS-Cr-SAT<br />
Knob 964M: MS, MS-N,MS-Cr, MS-Cr-SAT<br />
Knob 974: MS-PVD, MS-N, MS-Cr, MS-Cr-SAT<br />
124<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home
knob model 664 MS<br />
design: <strong>Grundmann</strong><br />
knob model 664M MS<br />
design: <strong>Grundmann</strong><br />
knob model 964 MS<br />
design: <strong>Grundmann</strong><br />
knob model 964M MS<br />
design: <strong>Grundmann</strong><br />
prices see page 317<br />
prices see page 317<br />
prices see page 317<br />
prices see page 317<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
knob model 664a F1-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 317<br />
knob model 664aM F1-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 317<br />
Technical details<br />
Knob model 664 (674) Knob model 664M Knob model 964 (974) Knob model 964M<br />
23<br />
23<br />
ø24<br />
ø51<br />
35<br />
ø22<br />
ø40<br />
(ø50)<br />
35<br />
37<br />
ø46<br />
40<br />
(40)<br />
ø46<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
125
WG Fittings for House and Home<br />
Roses<br />
round & small<br />
As versatile and design-conscious as the shaping<br />
of handle levers has developed throughout<br />
the industry in the last 20 years, people have<br />
been quite discreet in the design of rose or<br />
backplate. The simple round rose in particular<br />
has become a standard product. It is straightforward,<br />
elegant and adaptable. And for those who<br />
love understatement and implement unlockable<br />
Rose model 655 F1-SAT<br />
with visible screws<br />
prices see page 322<br />
doors in the inner door area, only a lever handle<br />
rose can be installed. Totally pure!<br />
Design: GRUNDMANN<br />
rose model 655ZU F1-SAT<br />
with universal support<br />
prices see page 324<br />
rose model 955S MS<br />
with visible screws<br />
prices see page 322<br />
rose model 655SZ POL<br />
with visible screws<br />
prices see page 322<br />
Technical details<br />
Round and small roses<br />
Finishes<br />
POL = aluminium extra bright<br />
F1-SAT = aluminium silver anodized<br />
satin finish<br />
F2 = aluminium new silver anodized<br />
P-BE = aluminium powder coated<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Roses D6<br />
POL, F1-SAT, F2, P-BE, MS, MS-Cr,<br />
MS-Cr-SAT, MS-N, E-POL, E-SAT<br />
Roses D70<br />
F1-SAT, F2, MS, MS-Cr, MS-Cr-SAT,<br />
MS-N, E-POL, E-SAT<br />
Roses AB6 (visible screws)<br />
POL, F1-SAT, F2<br />
Roses 600S<br />
POL, F1-SAT, F2<br />
Roses 900S<br />
MS, MS-N, MS-Cr, MS-Cr-SAT<br />
126 <strong>Grundmann</strong> | WG | Fittings for House and Home
Technical details<br />
Roses model D6 (aluminium 51 mm ø, brass and stainless steel 50 mm ø, rose height 8 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
664a/648A<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
steel inlay<br />
<br />
steel inlay<br />
<br />
<br />
<br />
648U 655ZU 648T 655ZT <br />
648/664a 648UFH, 648TFH 655ZUFH, 655ZTFH<br />
T = with rose support made of polyamide 6 (single-sided mounting)<br />
A = with projections for chipboard screws<br />
U = with universal support<br />
FH = with fire retardant rose support with M4 threads<br />
<br />
<br />
<br />
<br />
4x40<br />
M4<br />
<br />
<br />
Checked ÖNORM EN 1906, category of use 3<br />
b 8,25 6,25<br />
Technical details<br />
Roses model D70 (aluminium, brass and stainless steel 50 mm ø, roses height 7 mm)<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
<br />
<br />
<br />
<br />
<br />
T = with rose support (single-sided mounting)<br />
A = with projections for chipboard screws<br />
U = with universal support<br />
FH = with fire retardant rose support with M4 threads<br />
<br />
ø49,5<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
46<br />
7<br />
ø8(M4)<br />
5<br />
38<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
b<br />
ø49,5<br />
7048U 7055ZU 664a/7048U<br />
Checked ÖNORM EN 1906, category of use 2<br />
4x40<br />
M4<br />
ø8(M4)<br />
7<br />
5<br />
<br />
<br />
38<br />
ø8(M4)<br />
5<br />
7<br />
<br />
<br />
ø50<br />
<br />
<br />
3254L/7048UFH 7055ZUFH 7048UFH<br />
Fire retardant: Checked ÖNORM EN 1906, category of use 3<br />
Technical details<br />
Roses model AB6 Small roses model 600S Small roses model 900S<br />
<br />
648 655Z 648S 655S, 655SZ, 682S 948S 955S,955SZ<br />
Checked ÖNORM EN 1906, category of use 2<br />
b 8,25 6,25<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home<br />
127
WG Fittings for House and Home<br />
Backplates series<br />
5300 | 5700<br />
Large backplates can be practical for renovation<br />
projects, however they can also be used to<br />
protect the door leaf. And perhaps you will also<br />
find that a large backplate goes better with a selfconfident<br />
lever than it does with a small decorative<br />
rose? Whatever the case, with <strong>Grundmann</strong><br />
you have the choice. You can combine all lever<br />
models from our product line with these backplates.<br />
Design: GRUNDMANN<br />
backplate model 5362Z F1-SAT<br />
prices see page 320<br />
backplate model 5762 F1-SAT<br />
prices see page 320<br />
Technical details<br />
Backplate model 5362Z<br />
Backplate model 5762Z<br />
Standards<br />
<br />
<br />
<br />
<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For bit keyhole 90 72 78<br />
<br />
<br />
<br />
<br />
<br />
<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
<br />
<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Category of use grade 3<br />
ÖNORM EN 1906<br />
<br />
<br />
Fire retardant according to<br />
ÖNORM B 3859<br />
(fire retardant according to DIN 18273FS<br />
see the GEOS program)<br />
128<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home
WG Fittings for House and Home<br />
Backplates series<br />
2500<br />
Each style again invokes a counter-style to the<br />
plan and thus alternating trends can also be<br />
observed in our industry. For years visible screws<br />
were considered to be old-fashioned and were<br />
frowned on as humble, however today this simplicity<br />
once again esteemed as a counter-position.<br />
And in addition: These wide backplates can also<br />
be quite useful for renovation projects and for<br />
covering unwanted holes.<br />
Design:<br />
SCHAEFER DESIGN<br />
backplates series 2500<br />
WG-FITTINGS<br />
FOR HOUSE<br />
AND HOME<br />
prices see page 321<br />
Technical details<br />
Backplate rounded rounded angled angled semi-rounded<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
2562Z/280Rx54 2562Z/270Rx45 2562Z/265x29 2562Z/230x29 2562Z/230HRx175<br />
backplate thickness 2 mm (valid for all backplates on this page)<br />
Standards<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
Finish<br />
E-SAT = stainless steel satin finish<br />
Door thickness 38–43 mm<br />
Please specify special door<br />
thicknesses.<br />
Category of use grade 3<br />
checked ÖNORM EN 1906<br />
Examples of use<br />
with model 2152 (left)<br />
with model 2552 (right)<br />
For bit keyhole 90 72 78<br />
For profi le cylinder 88 72 92 78<br />
For round cylinder 90 74 94 78<br />
WC (WC-spindle) 90/7 78/8* 78/8*<br />
Handle spindle 8,5 8 10** 8<br />
*) with compensating bush 7/8 square<br />
**) with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Fittings for House and Home 129
130 <strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong>
product group<br />
Anti-burglary<br />
Fittings<br />
Explanations<br />
Series Resistance Class 1<br />
Series Resistance Class 2<br />
Series Resistance Class 3<br />
Series Resistance Class 4<br />
Knobs for Anti-burglary Fittings<br />
132<br />
134<br />
138<br />
146<br />
150<br />
152<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings 131
WG Anti-burglary Fittings<br />
Series Survey | Product Characteristics | Classification Table<br />
We offer anti-burglary fittings in four safety classes<br />
for doors in accordance with ENV 1627. Our series<br />
extends from styled fittings to various modern plate<br />
variations and through to narrow plates for metal<br />
frame doors. Where the materials go together all<br />
door handle models can be combined with all antiburglary<br />
series.<br />
Anti-burglary roses<br />
→ Series ZAL<br />
«Discreet Security»<br />
Standard: ÖNORM B 5351-W B 1,<br />
suited for ENV 1627-WK1 for doors<br />
Anti-burglary Fittings<br />
→ Series ZAM/15<br />
«The Slim Line»<br />
Standard: ÖNORM B 5351-W B 1,<br />
suited for ENV 1627-WK1 for doors<br />
→ Series ZAL/ZEL<br />
«The Viennese Classics»<br />
Standard: ÖNORM B 5351-W B 2,<br />
suited for ENV 1627-WK2 for doors<br />
→ Series ZA/ZA-K<br />
«The Flexible One for House and home»<br />
Standard: ÖNORM B 5351-W B 2,<br />
suited for ENV 1627-WK2 for doors<br />
→ Series ZA3/ZA3-K<br />
«The New Standard»<br />
Standard: ÖNORM B 5351-W B 3,<br />
suited for ENV 1627-WK3 for doors<br />
→ Series ZAR/ZAR-K<br />
«A Combination of Roses and Backplate»<br />
Standard: ÖNORM B 5351-W B 2,<br />
suited for ENV 1627-WK2 for doors<br />
→ Series ZAS/ZAS-K<br />
«The Big Family»<br />
Standard: ÖNORM B 5351-W B 3,<br />
suited for ENV 1627-WK3 for doors<br />
→ Series VS-K<br />
«Safety as Secure as Steel»<br />
Standard: ÖNORM B 5351-W B 4,<br />
suited for ENV 1627-WK4 for doors<br />
NEW<br />
Product Characteristics of Individual Series<br />
→ Anti-drilling protection in cylinder area<br />
Protective steel plates (manganese steel or surface<br />
hardened steel) make it more difficult to drill in the<br />
vicinity of the cylinder.<br />
→ Counterplate<br />
The counterplate serves as a counter-bearing and<br />
is screwed to the exterior plate from the inside. This<br />
makes it more difficult to dismantle the exterior<br />
plate.<br />
→ Plug protection plate<br />
The plug protection plate completely covers the<br />
cylinder and only leaves the key slot free.<br />
(Series ZA-K, ZA3-K, ZAR-K, ZAS-K and VS-K)<br />
→ Shell structure<br />
The shell structure makes it possible to design the<br />
external plates to be optically appealing while still<br />
using the tried and tested protective plates.<br />
→ Cylinder sawing protection<br />
The cylinder sawing protection on the reverse of the<br />
protection plate makes it more difficult to saw off<br />
the cylinder using a flat saw between door leaf and<br />
protection fitting. (Series ZAL/ZEL)<br />
→ Cylinder cover<br />
A long cylinder cover offers good support for the<br />
cylinder and makes it more difficult to break the<br />
cylinder off. A protruding drum of up to 3mm is possible<br />
according to the Austrian standard and does<br />
not represent a security risk!<br />
Classification tables for anti-burglary fittings – classification key in accordance with EN 1906<br />
Pos. 1 2 3 4 5 6 7 8<br />
Use category Durability TDoor mass Fire resistance Security<br />
Corrosion<br />
resistance<br />
Anti-burglary<br />
security<br />
Execution type<br />
Einbruchhemmende Beschläge<br />
Klasse 4 7 – 0 0 2 X*) U<br />
*) corresponds to relevant class WB1 to WB4 in ÖNORM B 5351 of the desired model (1–4)<br />
132<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings
Resistance Classes | Standards<br />
Burglary tests are carried out on door elements in ENV<br />
1627. Furthermore the protection aims for anti-burglary<br />
fittings and locks must be fulfilled in accordance with<br />
the standards appendix.<br />
The resistance classes are defined as follows:<br />
Door resistance class WK 1<br />
→ Anticipated type of attack: basic protection against<br />
attempts to enter with physical violence such as<br />
kicking, jumping against the door, shouldering (primarily<br />
vandalism), low protection against the use of<br />
levering tools.<br />
→ Resistance time: no manual test<br />
→ Recommended use: basic security<br />
Apartment doors with low burglary resistance<br />
Door resistance class WK 2<br />
→ Anticipated type of attack: opportunist perpetrators<br />
also try to break in to the locked and bolted unit<br />
using simple tools such as screwdrivers, pliers and<br />
trowels.<br />
→ Resistance time: 3 minutes<br />
→ Recommended use: standard security<br />
Apartment doors and house doors with normal risk<br />
Door resistance class WK 3<br />
→ Anticipated type of attack: the perpetrator also<br />
tries to break open the locked and bolted unit using<br />
a second screwdriver and a crowbar.<br />
→ Resistance time: 5 minutes<br />
→ Recommended use: raised security<br />
Apartment doors and house doors at high risk<br />
Door resistance class WK 4<br />
→ Anticipated type of attack: the experienced perpetrator<br />
uses additional sawing and hammering tools<br />
such as a bearded axe, mortise chisel, hammer and<br />
chisel and a battery operated drill.<br />
→ Resistance time: 10 minutes<br />
→ Recommended use: high security<br />
Public buildings, commercial property<br />
Resistance classes in fitting standards<br />
Anti-burglary windows, doors and additional entries<br />
are regulated in ÖNORM B 5338.<br />
Anti-burglary fittings are regulated in ÖNORM B<br />
5351.<br />
The resistance classes in the fitting standards are<br />
exactly equivalent to the door resistance classes.<br />
For anti-burglary door elements in accordance with<br />
ÖNORM B 5338 and/or VORNORM ENV 1627 protective<br />
fittings must be tested in accordance with ÖNORM B<br />
1906 and fulfil the criteria of ÖNORM B 5351 according<br />
to table 4.<br />
The performance requirements for the door plates<br />
are determined in ÖNORM EN 1906, Appendix A, Table<br />
A.1 «Requirements for protective fittings for anti-burglary<br />
doors»:<br />
Requirements in accordance with ÖNORM EN 1906<br />
(ÖNORM B 5351)<br />
1 (WB1) 2 (W B 2) 3 (W B 3) 4 (W B 4)<br />
Stability of the plates 7 KN 10 KN 15 KN 20 KN<br />
Tensile load/screw connection 10 KN 15 KN 20 KN 30 KN<br />
Drill resistance 30 s 3 min 5 min<br />
Chisel test/No. of pendulum impacts 3 6 12<br />
Stability of plug protection plate 10 KN 15 KN 20 KN<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings 133
WG Anti-burglary Fittings<br />
Series ZAM<br />
Backplate 5800<br />
The price-conscious aluminium ZAM series<br />
consists of an exterior backplate screw fastened<br />
from the inside in which a hardened anti-drilling<br />
safeguard is embedded. It was developed especially<br />
for apartment building doors and can be<br />
combined with all aluminum fittings in our product<br />
line. And due to the narrow backplate width<br />
there is another totally different application area:<br />
The ZAM series can also be used for anti-burglary<br />
profile frame doors.<br />
Design:<br />
GRUNDMANN<br />
7052/664aSi/5862 ZAM/15<br />
F1-SAT<br />
prices see page 328<br />
752/664aMSi/5862 ZAM/15 F1-SAT<br />
prices see page 331<br />
Technical details<br />
Anti-buglary series ZAM/15<br />
checked<br />
ÖNORM B 5351-W B<br />
1<br />
suited for ENV 1627-WK1<br />
Reg.no. ON-N 2005 093<br />
<br />
<br />
Backplates of this series are checked fire<br />
retardant according to ÖNORM B 3859.<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
Door thickness 38–43 mm<br />
Please specify special door thicknesses.<br />
Tender text for<br />
anti-burglary fittings series ZAM<br />
Anti-burglary fitting for anti-burglary doors and tubular<br />
frame doors, protective inlay made of hardened<br />
steel (32x74x3 mm), galvanized. External plate made<br />
of aluminium 15 mm thick, integrated threaded bore<br />
holes and integrated anti-drilling feature, interior<br />
plate made of aluminium 10 mm thick, with integrated<br />
counter plate, screwing with 3 steel screws<br />
M6, inaccessible from the outside, suited for cylinder<br />
locks, checked ÖNORM B5351-W B 1, e.g. lever<br />
handle model 752L/664aSi/5862 ZAM/15mm F1-SAT<br />
Matching drilling template<br />
192ZAS (brown)<br />
134 <strong>Grundmann</strong> | WG | Anti-burglary Fittings
50<br />
4<br />
2<br />
1<br />
3<br />
1 Anti-drilling protection:<br />
The anti-drilling feature is configured as a hardened<br />
32 x 74 mm inlay and is imbedded in the<br />
external plate, which is screw-fastened from the<br />
inside. The anti-drilling feature guides the cylinder<br />
and protects the lock in the zone of the detainer<br />
and the rotary mounting.<br />
2 External backplate:<br />
Decorative plate with integrated threaded boreholes<br />
and integrated anti-drilling feature; cannot<br />
be unscrewed from the outside.<br />
1+2 Cylinder guide:<br />
Combination cylinder guide – aluminum / tempered<br />
steel.<br />
15 mm for cylinder projecting length<br />
3 Counterplate:<br />
The counterplate serves as an abutment for the<br />
screw fastening or as a receiving element for the<br />
internal plate.<br />
4 Internal backplate:<br />
Aluminum decorative plate assembled with the<br />
counterplate without visible screw fastening.<br />
Screw fastening:<br />
3 high-strength M6 steel screws, inaccessible from<br />
the outside.<br />
Traction force more than 10 kN (approx. 1 Ton) per<br />
screw.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series ZAM/15<br />
Anti-burglary fittings<br />
Distance E ÖNORM DIN72 DIN92 CH-NORM<br />
For profi le cylinder 88 72 92 78<br />
external backplate<br />
50<br />
backplate length<br />
backplate width<br />
backplate thickness external<br />
backplate thickness external<br />
243 mm<br />
39 mm<br />
15 mm<br />
10 mm<br />
internal backplate<br />
Handle spindle 8,5 8 10* 8<br />
*) with compensating bush 8/10 square<br />
47<br />
67.5<br />
54<br />
40<br />
74<br />
21.5<br />
235<br />
134<br />
243<br />
E 92.5<br />
76<br />
210<br />
243<br />
85<br />
5664GSi<br />
664aSi<br />
ø 50<br />
39<br />
ZAM 15<br />
M6<br />
10<br />
3<br />
1.5<br />
10<br />
39<br />
664aMSi<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings 135
WG Anti-burglary Fittings<br />
Series ZAL<br />
Roses<br />
Security fittings are usually offered with robust<br />
long backplates, naturally for security reasons.<br />
However for those who would rather have a<br />
discrete rose that is not so involved and that particularly<br />
brings the lever handle or the knob into<br />
the forefront will find a convincing alternative in<br />
the ZAL rose series. And thus security and formal<br />
understatement find a common denominator.<br />
Design: GRUNDMANN<br />
7052/D6/855ZAL F1-SAT<br />
prices see page 332<br />
.<br />
Technical details<br />
Anti-burglary series of roses ZAL<br />
checked<br />
ÖNORM B 5351-W B<br />
1<br />
suited for doors according to ENV 1627-WK1<br />
Reg.no. ON-N 2005 093<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Door thickness 39–43 mm<br />
Please specify special door thicknesses.<br />
<br />
<br />
<br />
<br />
Roses series ZAL are checked fire retardant<br />
ÖNORM B 3859 and DIN 18273FS (loose<br />
standard-bearing according to point 3.1). When<br />
ordering fittings checked according to DINstandards,<br />
please choose an article no. with «FH»<br />
(e.g. 1752FH).<br />
Tender text for<br />
anti-burglary roses 855 series ZAL<br />
Anti-burglary round roses, consisting of an ornamental<br />
rose, that covers a rose made of 5 mm thick,<br />
wrought special steel; completely surface hardened<br />
(more than 60HRC); cannot be unscrewed from the<br />
outside. Internal rose with galvanized steel inlay,<br />
serves as a butress for the M5 high-strength steel<br />
screws (traction force more than 10kN per screwpair),<br />
the cylinder of the ZAL-design does not protrude<br />
past the external backplate and has a 4 mm<br />
<br />
On request fittings series ZAL are delivered with<br />
fixed-rotating-housed lever handles for emergency<br />
exit doors. In this case please choose a<br />
GEOS-lever handle, that meets the standards for<br />
emergency exit doors according to EN 179 (e.g.<br />
1754FHA/D6/855ZAL)<br />
internal section. Checked fire retardant according to<br />
ÖNORM B3859. Security check according to ÖNORM<br />
EN 1906 grade 1, B 5351-W B 1<br />
Matching drilling template<br />
192 (red)<br />
136<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings
5<br />
4<br />
3<br />
1<br />
2<br />
1 Protective rose:<br />
Designed as a rose, made of 5 mm thick, high<br />
strength, wrought special steel; completely<br />
surface hardened and galvanized.<br />
Cannot be unscrewed from the outside, increased<br />
resistance against bending, sawing, impact, etc.<br />
2 External rose:<br />
Ornamental rose in aluminium, stainless steel<br />
or brass; permanently, flexibly bonded to the<br />
protective rose.<br />
3 Cylinder guide:<br />
The cylinder guide does not<br />
protrude past the external rose.<br />
Special cylinder sawing protection:<br />
Sawing off the cylinder with a saw between<br />
the protective rose and door leaf is effectively<br />
prevented with this special protection.<br />
4 Counter rose:<br />
The solid baserose with steel inlay serves as an<br />
abutment for the screw fastening.<br />
5 Internal rose:<br />
Ornamental rose made of aluminium, stainless<br />
steel or brass; with unvisible screws.<br />
Screw connection:<br />
2 high-strength steel screws M5, not accessible<br />
externally.<br />
Traction force more than 10 kN (approx. 1 Ton)<br />
per screw.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series of roses ZAL (external height in cylinder area 8 mm)<br />
internal rose<br />
external rose<br />
protection against knocking off<br />
counter plate<br />
5.5 7<br />
8<br />
ø46.5<br />
ø47.5<br />
8.25<br />
M5<br />
ø8<br />
4<br />
38<br />
ZAL<br />
8<br />
13.5<br />
5.75<br />
aluminium ø51 mm<br />
brass, stainless steel ø50 mm<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings 137
WG Anti-burglary Fittings<br />
Series ZA | ZA-K<br />
Backplate 5900<br />
Anti-burglary fittings of the ZA and ZA-K series<br />
are in the low-priced segment. In their price<br />
class, they combine an attractive outer appearance<br />
with the usual processing quality and<br />
the advantages of the anti-burglary protection.<br />
Equipped with a solid support plate with integrated<br />
anti-drilling safeguard on the outside,<br />
and screwed from the inside using a counter<br />
plate with 3 screws of high tensile strength,<br />
these fittings fulfil the requirements of ÖNORM<br />
B 5351, WB2.<br />
Design: GRUNDMANN<br />
1752L/3264GSi/5962 ZA F1-SAT<br />
prices see page 336<br />
7052/3254LSi/5962 ZA-K F1-SAT<br />
prices see page 336<br />
Technical details<br />
Anti-burglary series ZA/ZA-K<br />
checked<br />
ÖNORM B 5351-W B<br />
2<br />
suited for doors according to ENV 1627-WK2<br />
Reg.No. ON-N 2008 037<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-SAT = stainless steel satin finish<br />
Door thickness 39–43 mm<br />
Please specify special door thicknesses.<br />
Matching drilling template<br />
192ZAS (brown)<br />
<br />
<br />
Backplates of this series are checked fire<br />
retardant according to ÖNORM B 3859.<br />
Tender text for<br />
anti-burglary fittings series ZA<br />
Anti-burglary fitting, consisting of a decorative plate<br />
that covers the carrier plate with an integrated protection<br />
plate, with thread bolts. Anti-drilling plate in<br />
the cylinder section is made of thick high strength<br />
steel (74x38x3 mm), cannot be unscrewed from the<br />
outside, external backplate height 15 mm. Counter<br />
plate made of steel, serves primarily as a buttress for<br />
the screw fittings, with 3 high-strength steel screws<br />
M6, for cylinder locks. Checked ÖNORM B 5351<br />
WB2, (ENV 1627 WK 2), e.g. 1752L/5962 ZA, F1-SAT<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Tender text for anti-burglary fittings series ZA-K, as<br />
series ZA, plus: Integrated plug protection provides<br />
protection against break-off and drilling of the cylinder<br />
as well as against intrusions with a plug removal<br />
device using the corkscrew method, with integrated<br />
anti-drilling device, surface hardened (60 HRC),<br />
suited for projections of the cylinder from 12,5 - 17,5<br />
mm. Checked ÖNORM B 5351 WB2, (ENV 1627 WK<br />
2), e.g. 1752L/5962 ZA-K, F1-SAT<br />
138<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings
3<br />
3<br />
4<br />
4<br />
2<br />
1a<br />
2<br />
1a<br />
5<br />
1<br />
1<br />
1 Massive carrier plate with integrated anti-drilling<br />
device:<br />
1a The anti-drilling protection is designed as a<br />
hardened layer (38 x 74 mm) in the massive<br />
carrier plate. The anti-drilling protection<br />
guides the cylinder and protects the lock in the<br />
section of the detainer. Cannot be unscrewed<br />
from the outside, increased resistance against<br />
bending.<br />
2 External backplate:<br />
Ornamental backplate in aluminium or<br />
stainless steel, height 15 mm, mounted over the<br />
massive carrier plate.<br />
1, 1a +2<br />
Cylinder guide:<br />
Combined cylinder design made of the massive<br />
carrier plate with an integrated anti-drilling<br />
device (made of hardened steel).<br />
3 Counter backplate:<br />
It serves primarily as a buttress for the screw<br />
fitting and as pick-up element for the internal<br />
backplate.<br />
4 Internal backplate:<br />
Ornamental backplate in aluminium or<br />
stainless steel, without visible screws, combined<br />
with the counter backplate, backplate height:<br />
8 mm<br />
Screw connection: 3 high-strength steel screws M6,<br />
not accessible externally.<br />
Traction force more than 15 kN (ca. 1.5 tons) per<br />
screw.<br />
Available also with plug protection (series ZA-K):<br />
5 Cylinder covering with plug protection:<br />
This cylinder protection is made from steel,<br />
completely hardened, with solidly hardened<br />
cover plate made of steel, and provides protection<br />
against break-off and drilling of the cylinder as<br />
well as against intrusions with a plug removal<br />
device using the corkscrew method. The cylinder<br />
cover can be adapted to cylinder ends in the<br />
range of 12,5-17,5 mm.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series ZA<br />
Anti-burglary series ZA-K<br />
external backplate<br />
internal backplate<br />
external backplate<br />
internal backplate<br />
Außenschild<br />
54<br />
6<br />
Innenschild<br />
Außenschild<br />
62<br />
6<br />
Innenschild<br />
ø49<br />
54<br />
93<br />
260<br />
E<br />
76<br />
93<br />
76<br />
3254LSi<br />
M6<br />
ø<strong>11</strong> 21.5<br />
134<br />
210<br />
74<br />
54 15<br />
1.5 8<br />
3<br />
54<br />
260<br />
260<br />
E<br />
54<br />
79<br />
3264GSi<br />
15<br />
21.5<br />
M6<br />
ø<strong>11</strong><br />
134<br />
PZ<br />
210<br />
12.5 - 17.5<br />
(ZA-K)<br />
74<br />
3<br />
1.5 8<br />
54<br />
260<br />
Anti-burglary Fittings<br />
Distance E ÖNORM DIN 72 DIN 92 CH 78<br />
Profi le cylinder 88 72 92 78<br />
Spindle 8,5 8/9 (FH) 10* 8<br />
* with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
139
WG Anti-burglary Fittings<br />
Series ZA3 | ZA3-K<br />
Backplate 5900<br />
The new anti-burglary series ZA3 and ZA3-K are<br />
good looking as well as they correspond - due to<br />
the massive carrier plate with an integrated antidrilling<br />
device - to the requirements of ÖNORM<br />
B 5351, WB3. It is up to you now to choose<br />
between the materials stainless steel and aluminium<br />
and to decide, if you need an extra plug<br />
protection as well.<br />
Design: GRUNDMANN<br />
7252/3264GSi/5962 ZA3 F1-SAT<br />
prices see page 340<br />
18052/3264GSi/5962 ZA3-K E-SAT<br />
prices see page 340<br />
Technical details<br />
Anti-burglary series ZA3/ZA3-K<br />
checked<br />
ÖNORM B 5351-W B<br />
3<br />
suited for doors according to ENV 1627-WK3<br />
Reg.Nr. ON-N 2009 140<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-SAT = stainless steel satin finish<br />
Door thickness 39–43 mm<br />
Please specify special door thicknesses.<br />
Matvhing drilling template<br />
192ZAS (brown)<br />
<br />
<br />
Backplates of this series are checked fire<br />
retardant according to ÖNORM B 3859.<br />
Tender text for<br />
anti-burglary fittings series ZA3<br />
Anti-burglary fitting, consisting of a decorative plate<br />
that covers the carrier plate with an integrated protection<br />
plate, with thread bolts. Anti-drilling plate in<br />
the cylinder section is made of thick high strength<br />
steel (74x38x3 mm), cannot be unscrewed from the<br />
outside, external backplate height 15 mm. Counter<br />
plate made of steel, serves primarily as a buttress<br />
for the screw fittings, with 3 high-strength steel<br />
screws M6, for cylinder locks. Checked ÖNORM B<br />
5351 WB3, (ENV 1627 WK 2),, e.g. 1752L/5962 ZA3,<br />
F1-SAT<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Tender text for anti-burglary fittings series ZA3-<br />
K, as series ZA3, plus: Integrated plug protection<br />
provides protection against break-off and drilling of<br />
the cylinder as well as against intrusions with a plug<br />
removal device using the corkscrew method, with<br />
integrated anti-drilling device, surface hardened (60<br />
HRC), suited for projections of the cylinder from 12,5<br />
- 17,5 mm. Checked ÖNORM B 5351 WB3, (ENV 1627<br />
WK 2), e.g. 1752L/5962 ZA3-K, F1-SAT<br />
140 <strong>Grundmann</strong> | WG | Anti-burglary Fittings
210<br />
3<br />
3<br />
4<br />
4<br />
2<br />
1a<br />
2<br />
1a<br />
5<br />
1<br />
1<br />
1 Massive carrier plate with integrated anti-drilling<br />
device:<br />
1a The anti-drilling protection is designed as a<br />
hardened layer (38 x 74 mm) in the massive<br />
carrier plate. The anti-drilling protection<br />
guides the cylinder and protects the lock in the<br />
section of the detainer. Cannot be unscrewed<br />
from the outside, increased resistance against<br />
bending.<br />
2 External backplate:<br />
Ornamental backplate in aluminium or<br />
stainless steel, height 15 mm, mounted over the<br />
massive carrier plate.<br />
1, 1a +2<br />
Cylinder guide:<br />
Combined cylinder design made of the massive<br />
carrier plate with an integrated anti-drilling<br />
device (made of hardened steel).<br />
3 Counter backplate:<br />
It serves primarily as a buttress for the screw<br />
fitting and as pick-up element for the internal<br />
backplate.<br />
4 Internal backplate:<br />
Ornamental backplate in aluminium or<br />
stainless steel, without visible screws, combined<br />
with the counter backplate, backplate height:<br />
8 mm<br />
Screw connection: 3 high-strength steel screws M6,<br />
not accessible externally.<br />
Traction force more than 20 kN (ca. 2 tons) per screw.<br />
Available also with plug protection (series ZA-K):<br />
5 Cylinder covering with plug protection:<br />
This cylinder protection is made from steel,<br />
completely hardened, with solidly hardened<br />
cover plate made of steel, and provides protection<br />
against break-off and drilling of the cylinder as<br />
well as against intrusions with a plug removal<br />
device using the corkscrew method. The cylinder<br />
cover can be adapted to cylinder ends in the<br />
range of 12,5-17,5 mm.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series ZA3<br />
Anti-burglary series ZA3-K<br />
external backplate internal backplate external backplate internal backplate<br />
Außenschild<br />
54<br />
9<br />
Innenschild<br />
Außenschild<br />
62<br />
9<br />
Innenschild<br />
260<br />
E<br />
21.5<br />
134<br />
254<br />
M6<br />
¯10<br />
260<br />
134<br />
ø49<br />
210<br />
93<br />
254<br />
76<br />
260<br />
PZ<br />
M6<br />
¯10<br />
54<br />
93<br />
76<br />
3264LSi<br />
260<br />
E<br />
79<br />
3264GSi<br />
21.5<br />
54<br />
15<br />
3.5<br />
8<br />
54<br />
54<br />
15<br />
12.5-17.5<br />
(ZA3-K)<br />
3.5<br />
8<br />
54<br />
Anti-burglary Fittings<br />
Distance E ÖNORM DIN 72 DIN 92 CH 78<br />
Profi le cylinder 88 72 92 78<br />
Spindle 8,5 8/9 (FH) 10* 8<br />
* with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
141
WG Anti-burglary Fittings<br />
Series ZAL/ZEL<br />
Models Elegant,<br />
Alt-Wien<br />
Those who esteem the Viennese classics in our<br />
product line, the models Elegant and Alt-Wien<br />
will also want to install them on their anti-burglary<br />
doors in proper style. And not cut any corners<br />
where technical safety specifications are concerned,<br />
in the process. The anti-burglary backplates<br />
have been designed like we design the inside<br />
door fittings of this model, with love and respect<br />
for the original.<br />
Design: GRUNDMANN<br />
570/664Si/572 ZAL MS-PVD<br />
prices see page 364<br />
970/964Si/972 ZEL MS-PVD<br />
prices see page 364<br />
Knob model 664MSi MS-PVD (left)<br />
and 964MSi MS-PVD (right)<br />
Technical details<br />
Anti-burglary series ZAL/ZEL<br />
prices see page 366<br />
Checked<br />
ÖNORM B 5351-W B<br />
2<br />
suited for ENV 1627-WK2<br />
Reg.no. ON-N 2007 096<br />
<br />
<br />
<br />
<br />
Backplates series ZAL/ZEL are checked fire retardant<br />
ÖNORM B 3859 and DIN 18273FS (loose<br />
standard-bearing according to point 3.1). When<br />
ordering fittings checked according to DIN-standards,<br />
please choose an article no. with «FH»<br />
(e.g. 570FH).<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
Finishes<br />
MS-PVD = brass zircon-nitride coated<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
Door thickness 39–43 mm<br />
Please specify special door thicknesses.<br />
Matching drilling template: 192S (orange)<br />
Tender text for<br />
anti-burglary fittings series ZAL/ZEL<br />
Anti-burglary fitting, consisting of a protective plate,<br />
that is covered by a decorative plate and a counter<br />
plate, protective plate made of 5 mm thick high<br />
strength, wrought special steel (more than 60 HRC),<br />
cannot be unscrewed from the outside. Counter<br />
plate made of 3 mm thick galvanized steel, serves<br />
primarily as a buttress for the screw fittings with 3<br />
high-strength steel screws M6. Traction force more<br />
than 15 kN (ca. 1.5 tons) per screw.<br />
Cylinder guide: The ZEL design incorporates a cylinder<br />
with a fully forged 12 or 15 mm external section<br />
and 4 mm internal section (cylinder sawing protection).<br />
In the ZAL design the cylinder guide does not<br />
protrude past the external backplate and has a fully<br />
forged 4 mm internal section.<br />
Checked ÖNORM B5351-W B 2,<br />
e.g. 570/562ZEL MS-PVD<br />
142<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings
5<br />
3<br />
2<br />
1<br />
4<br />
The cylinder cover can be delivered<br />
with 12 or 15 mm length (measure H<br />
– see sketch)<br />
<br />
<br />
1 Protective backplate:<br />
Designed as a long backplate, it covers and protects<br />
the lock over its entire height. Made of 5 mm thick,<br />
high strength, wrought special steel; completely<br />
surface hardened and galvanized. Cannot be un<br />
screwed from the outside, increased resistance<br />
against bending, sawing, impact, etc.<br />
2 External backplate:<br />
Ornamental backplate in aluminium or brass; permanently,<br />
flexibly bonded to the protective backplate.<br />
3 Cylinder guide:<br />
The ZEL design incorporates a cylinder with a fully<br />
forged 12 or 15 mm external section and 4 mm<br />
internal section (cylinder sawing protection) while<br />
in the ZAL design, the cylinder guide does not protrude<br />
past the external backplate.<br />
Special cylinder sawing protection:<br />
Sawing off the cylinder with a saw between the<br />
protective backplate and door leaf is effectively<br />
prevented with this special protection.<br />
4 Counter backplate:<br />
made of 3 mm thick galvanized steel, serves<br />
primarily as a buttress for the screw fittings.<br />
5 Internal backplate:<br />
Ornamental backplate made of aluminium or<br />
brass, with model-matched adaptation to<br />
intermediate door and window fittings.<br />
Screw connection:<br />
3 high-strength steel screws M6, not accessible<br />
externally.<br />
Traction force more than 15 kN (ca. 1.5 tons)<br />
per screw.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series model 500 ZAL/ZEL<br />
Anti-burglary series model 900 ZAL/ZEL<br />
external backplate<br />
internal backplate<br />
external backplate<br />
internal backplate<br />
45<br />
5 7<br />
48<br />
5 7<br />
280<br />
E 105<br />
ø51<br />
664Si<br />
215<br />
21<br />
ø49<br />
215<br />
198<br />
C<br />
215<br />
M6<br />
A<br />
280<br />
E 105<br />
21<br />
251<br />
280<br />
23<br />
35<br />
198<br />
C<br />
215<br />
240<br />
280<br />
664MSi<br />
964Si<br />
964MSi<br />
23<br />
35<br />
M6<br />
A<br />
41<br />
ZAL 8<br />
ZEL 12<br />
15<br />
ø12<br />
15 4<br />
3<br />
8<br />
41<br />
ø46<br />
40 ZAL 8<br />
ZEL 12<br />
15<br />
ø12<br />
15 4<br />
3<br />
6<br />
36<br />
ø46<br />
Anti-burglary fittings<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For profi le cylinder 88 72 92 78<br />
Measure C 71,5 71,5 67,5 65,5<br />
Measure A 54,5 54,5 38,5 54,5<br />
Handle spindle 8,5 8/9 (FH) 10* 8<br />
*) with compensating bush 8/10 square<br />
backplate length 280 mm<br />
backplate width<br />
40 mm<br />
backplate thickness external 8 mm<br />
backplate thickness internal 6 mm<br />
external cylinder region:<br />
ZEL design 15 mm<br />
on request 12 mm<br />
ZAL design 8 mm<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings 143
WG Anti-burglary Fittings<br />
Series ZAR | ZAR-K<br />
Roses/Backplate<br />
5300 | 5700<br />
with Roses<br />
On the exterior, a ZAS Series certified security<br />
backplate that helps to deter unwanted guests<br />
- inside an elegant discrete rose that leads into<br />
the living area. And both on one door leaf. As<br />
effective as this solution is it also satisfies the<br />
requirements imposed on a certified Resistance<br />
Class 2 protective fitting. And that is not all; the<br />
ZAR Series is now optionally available with plug<br />
protection plate.<br />
Design: GRUNDMANN<br />
7252/664aSi/D6/5362ZAR F1-SAT<br />
prices see page 344<br />
Technical details<br />
Anti-burglary series ZAR and series ZAR-K (with plug protection plate)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
checked<br />
ÖNORM B 5351 WB2<br />
suited for ENV 1627-WK2<br />
Reg.no. ON-N 2004 145<br />
<br />
<br />
<br />
<br />
Backplates series ZAR/ZAR-K are checked fire<br />
retardant ÖNORM B 3859 and DIN 18273FS<br />
(loose standard-bearing according to point 3.1).<br />
When ordering fittings checked according to DINstandards,<br />
please choose an article no. with «FH»<br />
(e.g. 1752FH).<br />
<br />
On request fittings series ZAR and ZAR-K are delivered<br />
with fixed-rotating-housed lever handles for<br />
emergency exit doors. In this case please choose<br />
a GEOS-lever handle, that meets the standards for<br />
emergency exit doors according to EN 179 (e.g.<br />
1754FHA/D6/5362ZAR E-SAT).<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Door thickness 39–43 mm<br />
Please specify special door thicknesses.<br />
144 <strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
Tender text for<br />
anti-burglary fittings series ZAR<br />
Anti-burglary fitting with a protective plate that is<br />
covered by a decorative plate in sandwich structure,<br />
increased resistance levels against bending, sawing<br />
impacts in the cylinder area because of 3 overlaid<br />
steel plates with an integrated manganese steel<br />
plate, 40 mm wide, inaccessible from the outside.<br />
Cylinder guide series ZAR is 10 mm (external plate<br />
12 mm). Inner anti-burglary roses serve as counter<br />
bearings, screwing with 4 high-strength M5 steel<br />
screws. Checked ÖNORM B 5351 W B 2,<br />
e.g. 752/664aSi/D6/5362 ZAR F1-SAT<br />
Tender text for<br />
anti-burglary fittings series ZAR-K<br />
as series ZAR, plus: Integrated plug protection<br />
provides protection against break-off and drilling of<br />
the cylinder as well as against intrusions with a<br />
plug removal device using the corkscrew method,<br />
surface hardened (60 HRC), suited for projections of<br />
the cylinder from 10 to 17 mm. Checked ÖNORM B<br />
5351-W B 2, e.g. 752/664aSi/D6/5362 ZAR-K F1-SAT<br />
Matching drilling template<br />
192ÖN/88 or 192DIN/72+92
4<br />
4<br />
3<br />
5<br />
5<br />
5<br />
2<br />
1<br />
2<br />
1<br />
1 Protective Backplate:<br />
The shield is 40 mm wide and designed in sandwich<br />
structure. It consists of several overlaid steel<br />
plates. An integrated manganese steel backplate<br />
protects the lock in the cylinder and engaging<br />
areas against drilling, increased resistance levels<br />
against bending, sawing, impacts, etc.<br />
2 External plate:<br />
The decorative plate is made of aluminum, stainless<br />
steel or brass, 12 mm high and imposed with<br />
the shield.<br />
3 plate forms can be chosen: Model 5300 and<br />
5700.<br />
3 Cylinder guide:<br />
The ZAR design has a 10 mm high cylinder guide<br />
(with the plate, 12 mm) and protects the cylinder<br />
against breaking off.<br />
4 Inner roses:<br />
Security rose in the cylinder area or round rose<br />
in the area of the lever handle are screw-fastened<br />
to the backplate and serve as counter bearings.<br />
The covering rose is made of aluminium, stainless<br />
steel or brass.<br />
Screw fastening:<br />
4 high-strength M5 steel screws, not accessible from<br />
the outside.<br />
Traction force more than 15 kN (ca. 1.5 tons) per<br />
screw.<br />
Available also with plug protection<br />
(Series ZAR-K):<br />
5 Cylinder covering with plug protection:<br />
This cylinder protection is made from steel,<br />
completely hardened, with solidly hardened<br />
cover plate made of steel (plug protection) and<br />
provides protection against break-off and drilling<br />
of the cylinder as well as against intrusions with a<br />
plug removal device using the corkscrew method.<br />
The cylinder cover can be adapted to cylinder ends<br />
in the range of 10 – 17 mm.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series ZAR and series ZAR-K (with plug protection plate)<br />
external backplate internal roses external backplate internal roses<br />
52<br />
<br />
260<br />
E 93<br />
ø49<br />
664aSi<br />
181<br />
10 6<br />
M5<br />
ø8<br />
E+8.25 16,5<br />
ø47,5<br />
8<br />
ø50<br />
8,25<br />
<br />
<br />
<br />
3254aSi<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
4,5<br />
38<br />
<br />
<br />
54<br />
12<br />
10<br />
<br />
<br />
<br />
<br />
47<br />
54<br />
5664GSi<br />
85<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Anti-burglary fittings<br />
Distance E ÖNORM DIN DIN 92<br />
For profi le cylinder 88 72 92<br />
Handle spindle 8,5 8/9 (FH) 10*<br />
*) with compensating bush 8/10 square<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
145
WG Anti-burglary Fittings<br />
Series ZAS | ZAS-K<br />
Backplate 5300<br />
If for example a homeowner wants to quickly<br />
install an anti-burglary fitting in his front door<br />
before leaving on vacation this usually involves<br />
making precise measurements on the door.<br />
Series ZAS backplates, such as the Model 5300,<br />
relieve the customer of this task for standard<br />
doors. They can be used for doors that open to<br />
the outside as well as for doors that open to the<br />
inside and they always satisfy the standardized<br />
specifications for cylinder protrusions with<br />
appropriate cylinder agreement with off the shelf<br />
cylinders.<br />
770/664aSi/5362 ZAS-K F1-SAT<br />
prices see page 359<br />
Design: GRUNDMANN<br />
1752L/664aSi/5362 ZAS F2<br />
prices see page 352<br />
Technical details<br />
Anti-burglary series ZAS and series ZAS-K (with plug protection plate)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
checked<br />
ÖNORM B 5351-W B 3<br />
suited for ENV 1627-WK3<br />
Reg.No. ON-N 2007 099<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Door thickness 37–41 mm<br />
Please specify special door thicknesses.<br />
Matching drilling template 192ZAS (brown)<br />
<br />
<br />
<br />
<br />
Backplates series ZAS/ZAS-K are checked fire<br />
retardant ÖNORM B 3859 and DIN 18273FS<br />
(loose standard-bearing according to point 3.1).<br />
When ordering fittings checked according to DINstandards,<br />
please choose an article no. with «FH»<br />
(e.g. 1752FH).<br />
Tender text for<br />
anti-burglary fittings series ZAS<br />
Anti-burglary fitting with a protective plate that is<br />
covered by a decorative plate in sandwich structure,<br />
increased resistance levels against bending, sawing<br />
impacts in the cylinder area because of 3 overlaid<br />
steel plates with an integrated manganese steel<br />
plate, 40 mm wide, inaccessible from the outside.<br />
Counter plate made of 3,5 mm thick steel, serves<br />
as a buttress for 3 high-strength steel screws M6.<br />
Traction force more than 20 kN (ca. 2 tons) per<br />
screw. Cylinder guide series ZAS is 10 mm (external<br />
plate 12 mm). Checked ÖNORM B 5351-W B 3<br />
(EN1627) WK 3, e.g. 752/664aSi/5362 ZAS F1-SAT<br />
<br />
On request fittings series ZAS and ZAS-K are delivered<br />
with fixed-rotating-housed lever handles for<br />
emergency exit doors. In this case please choose<br />
a GEOS-lever handle, that meets the standards for<br />
emergency exit doors according to EN 179 (e.g.<br />
1754FHA/5362ZAS)<br />
Tender text for<br />
anti-burglary fittings series ZAS-K<br />
as series ZAS, plus: Integrated plug protection<br />
provides protection against break-off and drilling<br />
of the cylinder as well as against intrusions with a<br />
plug removal device using the corkscrew method,<br />
surface hardened (60 HRC), suited for projections<br />
of the cylinder from 10 to 17 mm. Checked ÖNORM<br />
B 5351-W B 3 (EN1627) WK 3, e.g. 752/664aSi/5362<br />
ZAS-K F1-SAT<br />
146 <strong>Grundmann</strong> | WG | Anti-burglary Fittings
5<br />
3<br />
6<br />
5<br />
2<br />
1<br />
4<br />
2<br />
1<br />
4<br />
1 Protective Backplate:<br />
The protective backplate is 40 mm wide and has a<br />
laminated design. It consists of several layered<br />
steel backplates and is characterised by its great<br />
strength. An integrated manganese steel back<br />
plate protects the lock in the cylinder and engaging<br />
areas against drilling, increased resistance<br />
levels against bending, sawing, impacts,<br />
etc.<br />
2 External backplate:<br />
The ornamental backplate in aluminium, brass and<br />
stainless steel is 12 mm high and connected with<br />
the protective backplate.<br />
4 Counter backplate:<br />
Made of 3.5 mm thick galvanized steel and serves<br />
primarily as a buttress for the high-strength steel<br />
screws.<br />
5 Internal backplate:<br />
Ornamental backplate in aluminium, stainless<br />
steel and brass, invisible screw connections,<br />
connected to the counter backplate.<br />
Screw connection:<br />
3 High-strength steel screws M6, not accessible<br />
externally.<br />
Traction force more than 20 kN (ca. 2 tons) per screw.<br />
Available also with plug protection<br />
(Series ZAS-K):<br />
6 Cylinder covering with plug protection:<br />
This cylinder protection is made from steel,<br />
completely hardened, with solidly hardened<br />
cover plate made of steel (plug protection) and<br />
provides protection against break-off and drilling<br />
of the cylinder as well as against intrusions with a<br />
plug removal device using the corkscrew method.<br />
The cylinder cover can be adapted to cylinder<br />
ends in the range of 13 – 18 mm.<br />
3 Cylinder Guide:<br />
The ZAS design has a 10 mm high cylinder guide<br />
(with backplate 12 mm) and protects the cylinder<br />
against breaking.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series ZAS and series ZAS-K (with plug protection plate)<br />
external backplate internal backplate external backplate <br />
internal backplate<br />
<br />
<br />
<br />
<br />
<br />
<br />
3254LSi<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
664aSi<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Anti-burglary fittings<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For profi le cylinder 88 72 92 78<br />
Handle spindle 8,5 8/9 (FH) 10* 8<br />
*) with compensating bush 8/10 square<br />
<br />
<br />
<br />
5664GSi<br />
backplate length<br />
260 mm<br />
backplate width<br />
54 mm<br />
backplate thickness external 12 mm<br />
backplate thickness internal 8 mm<br />
Series ZAS:<br />
cylinder area outside 12 mm<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
147
WG Anti-burglary Fittings<br />
Series ZAS | ZAS-K<br />
Backplate 5700<br />
Good design and an extensive selection of exterior<br />
backplates in different materials and designs are<br />
typical for the anti-burglary Series ZAS. The Model<br />
5700 that is shown on this page is an excellent<br />
match for functional, linear lever handle forms.<br />
And like all ZAS Series backplates it can now be<br />
used for escape doors in accordance with EN 179.<br />
Design: GRUNDMANN<br />
652/664aSi/5762ZAS MS<br />
prices see page 354<br />
Technical details<br />
Anti-burglary series ZAS and series ZAS-K (with plug protection plate)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
checked<br />
ÖNORM B 5351-W B 3<br />
suited for ENV 1627-WK3<br />
Reg.No. ON-N 2007 099<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Door thickness 37–41 mm<br />
Please specify special door thicknesses.<br />
Matching drilling template 192ZAS (brown)<br />
<br />
<br />
<br />
<br />
Backplates series ZAS/ZAS-K are checked fire<br />
retardant ÖNORM B 3859 and DIN 18273FS<br />
(loose standard-bearing according to point 3.1).<br />
When ordering fittings checked according to DINstandards,<br />
please choose an article no. with «FH»<br />
(e.g. 1752FH).<br />
Tender text for<br />
anti-burglary fittings series ZAS<br />
Anti-burglary fitting with a protective plate that is<br />
covered by a decorative plate in sandwich structure,<br />
increased resistance levels against bending, sawing<br />
impacts in the cylinder area because of 3 overlaid<br />
steel plates with an integrated manganese steel<br />
plate, 40 mm wide, inaccessible from the outside.<br />
Counter plate made of 3,5 mm thick steel, serves<br />
as a buttress for 3 high-strength steel screws M6.<br />
Traction force more than 20 kN (ca. 2 tons) per<br />
screw. Cylinder guide series ZAS is 10 mm (external<br />
plate 12 mm). Checked ÖNORM B 5351-W B 3<br />
(EN1627) WK 3, e.g. 752/664aSi/5762 ZAS F1-SAT<br />
<br />
On request fittings series ZAS and ZAS-K are delivered<br />
with fixed-rotating-housed lever handles for<br />
emergency exit doors. In this case please choose<br />
a GEOS-lever handle, that meets the standards for<br />
emergency exit doors according to EN 179 (e.g.<br />
1754FHA/5762ZAS)<br />
Tender text for<br />
anti-burglary fittings series ZAS-K<br />
as series ZAS, plus: Integrated plug protection<br />
provides protection against break-off and drilling<br />
of the cylinder as well as against intrusions with a<br />
plug removal device using the corkscrew method,<br />
surface hardened (60 HRC), suited for projections<br />
of the cylinder from 10 to 17 mm. Checked ÖNORM<br />
B 5351-W B 3 (EN1627) WK 3, e.g. 752/664aSi/5762<br />
ZAS-K F1-SAT<br />
148 <strong>Grundmann</strong> | WG | Anti-burglary Fittings
5<br />
5<br />
3<br />
6<br />
2<br />
1<br />
4<br />
2<br />
1<br />
4<br />
1 Protective Backplate:<br />
The protective backplate is 40 mm wide and has a<br />
laminated design. It consists of several layered<br />
steel backplates and is characterised by its great<br />
strength. An integrated manganese steel back<br />
plate protects the lock in the cylinder and engaging<br />
areas against drilling, increased resistance<br />
levels against bending, sawing, impacts,<br />
etc.<br />
2 External backplate:<br />
The ornamental backplate in aluminium, brass and<br />
stainless steel is 12 mm high and connected with<br />
the protective backplate.<br />
3 Cylinder Guide:<br />
The ZAS design has a 10 mm high cylinder guide<br />
(with backplate 12 mm) and protects the cylinder<br />
against breaking.<br />
4 Counter backplate:<br />
Made of 3.5 mm thick galvanized steel and serves<br />
primarily as a buttress for the high-strength steel<br />
screws.<br />
5 Internal backplate:<br />
Ornamental backplate in aluminium, stainless<br />
steel and brass, invisible screw connections,<br />
connected to the counter backplate.<br />
Screw connection:<br />
3 High-strength steel screws M6, not accessible<br />
externally.<br />
Traction force more than 20 kN (ca. 2 tons) per screw.<br />
Available also with plug protection<br />
(Series ZAS-K):<br />
6 Cylinder covering with plug protection:<br />
This cylinder protection is made from steel,<br />
completely hardened, with solidly hardened<br />
cover plate made of steel (plug protection) and<br />
provides protection against break-off and drilling<br />
of the cylinder as well as against intrusions with a<br />
plug removal device using the corkscrew method.<br />
The cylinder cover can be adapted to cylinder<br />
ends in the range of 13–18 mm.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series ZAS and series ZAS-K (with plug protection plate)<br />
external backplate internal backplate external backplate <br />
internal backplate<br />
<br />
<br />
<br />
<br />
<br />
3254aSi<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
664aSi<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Anti-burglary fittings<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
For profi le cylinder 88 72 92 78<br />
Handle spindle 8,5 8/9 (FH) 10* 8<br />
*) with compensating bush 8/10 square<br />
<br />
<br />
<br />
5664GSI<br />
backplate length<br />
260 mm<br />
backplate width<br />
54 mm<br />
backplate thickness external 12 mm<br />
backplate thickness internal 8 mm<br />
Series ZAS:<br />
cylinder area outside 12 mm<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings 149
WG Anti-burglary Fittings<br />
Series VS-K<br />
Backplate<br />
5300 | 5700<br />
The VS-K Series is a class 4 (in accordance with<br />
ENV 1627) certified anti-burglary fitting<br />
10 mm thick solid steel and delivered with plug<br />
protection plate. It is, so-to-speak, the best that we<br />
have to offer. And also all the exterior backplates<br />
(Models 5300 and 5700) shown on this page and<br />
all lever handles from the WG and GEOS production<br />
lines can be combined with this series.<br />
Design: GRUNDMANN<br />
1752/3254LSi/5762 VS-K E-SAT<br />
prices see page 363<br />
Technical details<br />
Anti-burglary series VS-K (with plug protection plate)<br />
Category of use grade 4<br />
ÖNORM EN 1906<br />
checked<br />
ÖNORM B 5351-W B<br />
4<br />
corresponds with ENV 1627-WK4<br />
Reg.no. ON-N 2004 146<br />
<br />
<br />
<br />
<br />
Backplates series VS-K are checked fire retardant<br />
ÖNORM B 3859 and DIN 18273FS (loose<br />
standard-bearing according to point 3.1). When<br />
ordering fittings checked according to DIN-standards,<br />
please choose an article no. with «FH»<br />
(e.g. 1752FH).<br />
<br />
On request fittings series VS-K are delivered with<br />
fixed-rotating-housed lever handles for emergency<br />
exit doors. In this case please choose a<br />
GEOS-lever handle, that meets the standards for<br />
emergency exit doors according to EN 179 (e.g.<br />
1754FHA/5362 VS-K)<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Door thickness 37–41 mm<br />
Please specify special door thicknesses.<br />
150 <strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
Tender text for<br />
anti-burglary fittings series VS-K<br />
Anti-burglary fitting with a protective plate that is<br />
covered by a decorative plate, 10 mm steel, completely<br />
case hardened and galvanized, 50 mm wide,<br />
inaccessible from the outside. Designed as a long<br />
backplate, it covers and protects the lock over its<br />
most important parts and increases the resistance<br />
of the door leaf, integrated plug protection provides<br />
protection against break-off and drilling of the cylinder<br />
as well as against intrusions with a plug removal<br />
device using the corkscrew method. Counter plate<br />
made of 6 mm thick steel, serves as a buttress for 3<br />
high-strength steel screws M8, traction force more<br />
than 30 kN (ca. 3 tons), in the cylinder area 20 kN<br />
(ca. 2 tons) per screw, suited for projections of the<br />
cylinder of 10 to 17 mm.<br />
Checked ÖNORM B B 5351 W B 4,<br />
e.g. 1752/3254LSi/5762 VS-K E-SAT<br />
Please use the counter backplate instead of a<br />
drilling template!
5<br />
3<br />
2<br />
1<br />
4<br />
1 Protective backplate:<br />
Fabricated out of 10 mm steel, completely<br />
case hardened and galvanized, 50 mm wide.<br />
Configured as a long backplate; protects the<br />
principal part of the lock case and increases the<br />
strength of the door leaf. 20 mm high threaded<br />
pins with anti-drilling feature; protect the pullthrough<br />
screws against drilling. High strength<br />
against bending, drilling, knock-off, pull-off and<br />
break-off. Traction force in the screw zone 30 kN<br />
(approx. 3 tons); in the bolt zone 20 kN (approx.<br />
2 tons).<br />
2 External backplate:<br />
In virtue of the monocoque-structure it is possible<br />
to provide contemporary and optically sophisticated<br />
forms without detracting from the high<br />
security standard.<br />
The solid backplate made of case-hardened steel<br />
is covered with a decorative cover plate.<br />
A choice of 2 plate designs: Models 5300 and<br />
5700.<br />
3 Cylinder cover with plug protection plate:<br />
This cylinder protection is fabricated from steel,<br />
completely hardened, with solidly hardened<br />
cover plate made of steel (plug protection plate)<br />
and provides protection against break-off and<br />
drilling of the cylinder as well as against intrusions<br />
with a plug removal device using the cork<br />
screw method. The cylinder cover can be adapted<br />
to cylinder ends in the range of 10 – 15 mm.<br />
4 Counterplate:<br />
Fabricated out of 6 mm thick steel; serves primarily<br />
as an abutment for the high-strength steel<br />
screws.<br />
5 Internal backplate:<br />
Aluminum, stainless steel and brass decorative<br />
plate assembled with the counterplate with<br />
invisible screw fastening. The available variety of<br />
lever handles makes possible stylish and coordinated<br />
furnishing of the living area.<br />
A choice of 2 plate designs: Models 5300 and<br />
5700.<br />
Screw fastening:<br />
3 high-strength M8 steel screws, inaccessible from<br />
the outside.<br />
Traction force more than 30 kN (approx. 3 Tons) per<br />
screw.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Anti-burglary series VS-K (with plug protection plate)<br />
external backplate<br />
R 10<br />
59<br />
10 20<br />
internal backplate<br />
R 10<br />
664aSi<br />
Anti-burglary fittings<br />
Distance E ÖNORM DIN DIN 92 CH-NORM<br />
260<br />
E 102<br />
85<br />
5664GSi<br />
54<br />
254<br />
<strong>11</strong>7 21 80<br />
218<br />
254<br />
ø 12<br />
260<br />
ø50<br />
40<br />
For profi le cylinder 88 72 92 78<br />
Handle spindle 8,5 8/9 (FH) 10* 8<br />
*) with compensating bush 8/10 square<br />
backplate length<br />
260 mm<br />
backplate width<br />
54 mm<br />
backplate thickness external 12 mm<br />
backplate thickness internal 8 mm<br />
54<br />
12<br />
VS-K<br />
10<br />
M8<br />
max15<br />
6<br />
8<br />
54<br />
ø23<br />
3254aSi<br />
16 39<br />
ø49<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
151
WG Anti-burglary Fittings<br />
Knobs<br />
Anti-burglary<br />
Functional safety is of uppermost importance for<br />
us also in the designing of knobs for anti-burglary<br />
doors. The reason is that knobs offer less gripping<br />
surface than lever handles and can endanger<br />
the fingers while closing the door. Moreover<br />
the plate handle also offers the possibility to hide<br />
plate handle 5664GSi F1-SAT<br />
Design: schaefer-design<br />
prices see page 366<br />
the fingers like behind a protective shield.<br />
Design: GRUNDMANN,<br />
SCHAEFER-DESIGN<br />
plate handle 3264GSi<br />
Design: schaefer-design<br />
prices see page 367<br />
knob model 3254LSi E-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 366<br />
knob model 3154aSi F1-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 366<br />
Technical details<br />
Plate handle model 5664GSi Knob model 3154aSi Knob model 3254LSi Plate handle model 3264GSi<br />
85<br />
ø45<br />
47<br />
54<br />
<br />
ø21<br />
<br />
<br />
60<br />
<br />
<br />
<br />
<br />
<br />
Finishes<br />
POL = aluminium extra bright<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-N = brass extra bright unlacquered<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
MS-PVD = brass zircon-nitride coated<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Knob 664aSi: F1-SAT,F2, MS, MS-Cr, MS-Cr-SAT,<br />
E-POL, E-SAT<br />
Knob 664aMSi: F1-SAT,F2<br />
Knobs 664Si, 664MSi: MS-PVD, MS-Cr,MS-Cr-SAT<br />
Knobs 964Si, 964MSi: MS, MS-PVD, MS-N, MS-Cr,<br />
MS-Cr-SAT<br />
Knob 3054Si: F1-SAT, F2, MS, MS-Cr, MS-Cr-SAT<br />
E-POL, E-SAT<br />
Knob 3054MSi: F1-SAT, F2<br />
Knob 3154aSi: F1-SAT, MS, MS-Cr, MS-Cr-SAT, E-POL,<br />
E-SAT<br />
Knob 3254LSi: F1-SAT, F2, E-SAT<br />
Plate handle 3264GSi: F1-SAT, F2, E-SAT<br />
Plate handle 5664GSi: F1-SAT, F2, MS, MS-Cr, MS-<br />
Cr-SAT E-POL, E-SAT<br />
152<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings
knob model 664Si MS<br />
design: <strong>Grundmann</strong><br />
suited for series 500 ZAL/ZEL<br />
knob model 664MSi MS<br />
design: <strong>Grundmann</strong><br />
suited for series 500 ZAL/ZEL<br />
knob model 964Si MS<br />
design: <strong>Grundmann</strong><br />
suited for series 900 ZAL/ZEL<br />
knob model 964MSi MS<br />
design: <strong>Grundmann</strong><br />
suited for series 900 ZAL/ZEL<br />
prices see page 366<br />
prices see page 366<br />
prices see page 367<br />
prices see page 367<br />
knob model 664aSi F1-SAT<br />
design: <strong>Grundmann</strong><br />
Knob model 664aMSi F1-SAT<br />
design: <strong>Grundmann</strong><br />
knob model 3054Si F1-SAT<br />
design: <strong>Grundmann</strong><br />
knob model 3054MSi E-SAT<br />
design: <strong>Grundmann</strong><br />
prices see page 366<br />
prices see page 367<br />
prices see page 367<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
Technical details<br />
Knob model 664Si Knob model 664MSi Knob model 964Si Knob model 964MSi<br />
23<br />
23<br />
ø24<br />
ø51<br />
35<br />
ø22<br />
ø40<br />
(ø50)<br />
35<br />
37<br />
ø46<br />
40<br />
(40)<br />
ø46<br />
Technical details<br />
Knob model 664aSi Knob model 664aMSi Knob model 3054Si Knob model 3054MSi<br />
23<br />
ø21<br />
19<br />
40<br />
ø23<br />
38<br />
ø45<br />
35<br />
ø50<br />
ø45<br />
<br />
<br />
60<br />
20<br />
56<br />
<strong>Grundmann</strong> | WG | Anti-burglary Fittings<br />
153
154<br />
<strong>Grundmann</strong> | Supplementary Products<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong>
product group<br />
Supplementary<br />
products<br />
2mm-stainless steel plates<br />
for doors<br />
Fittings für glass doors<br />
Special fittings for<br />
handicapped people<br />
156<br />
157<br />
158<br />
Name plates<br />
Door stops<br />
Wardrobe hooks<br />
160<br />
162<br />
165<br />
NAME SUPPLE- PLATES,<br />
DOORS MENTARY STOPS,<br />
WARDROBE PRODUCTS<br />
HOOKS<br />
155
GEOS Fittings for Commercial and<br />
Public Sectors<br />
Backplates<br />
Series 2500<br />
WG4<br />
Each style again invokes a counter-style to<br />
the plan and thus alternating trends can also<br />
be observed in our industry. For years it was<br />
considered to be old-fashioned and humbly<br />
frowned upon to leave screws in the backplate<br />
or rose uncovered; now this simplicity is again<br />
esteemed as a formal counter position. And<br />
in addition: these backplates can also be quite<br />
useful in renovation projects and for covering<br />
unwanted holes.<br />
Design: SCHAEFER DESIGN<br />
backplates series 2500<br />
prices see page 370<br />
Technical details<br />
Backplate design rounded rounded angled angled semi-rounded<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
2562Z/280Rx54 2562Z/270Rx45 2562Z/265x29 2562Z/230x29 2562Z/230HRx175<br />
backplate thickness 2 mm (valid for all backplates on this page)<br />
Standard-finish<br />
E-SAT = stainless steel satin finish<br />
Door thickness 38–43 mm<br />
Special thicknesses please indicate.<br />
Category of use grade 4, ÖNORM EN 1906<br />
Order examples<br />
with model 2154 (left)<br />
and model 2554 (right)<br />
fixed-rotating-housed lever<br />
<br />
<br />
Fire retardant according<br />
to ÖNORM B 3859<br />
156 <strong>Grundmann</strong> | Supplementary Products
GEOS Fittings for Commercial and<br />
Public Sectors<br />
Fittings for<br />
Glass Doors<br />
GEOS + WG<br />
GEOS fittings can also be combined with<br />
DORMA glass door locks. The GEOS philosophy<br />
includes giving a model as broad a range of<br />
technical options as possible. Please include<br />
the addition «for glass door locks» in the order<br />
information.<br />
lever handle for glass doors<br />
suited for STUDIO GALA<br />
lever handle for glass doors<br />
suited for STUDIO RONDO<br />
lever handle for glass doors<br />
suited for JUNIOR OFFICE<br />
Technical details<br />
Lever handle set with roses<br />
Lever handle set without roses<br />
GEOS-lever handle or<br />
with borehole ¿14<br />
GEOS-lever handle or<br />
with borehole ¿14<br />
rose<br />
38 bearing made of stainless steel<br />
SUPPLE-<br />
MENTARY<br />
PRODUCTS<br />
DORMA lock<br />
DORMA lock<br />
38<br />
8 lever handle spindle<br />
rose<br />
8 lever handle spindle<br />
bearing made of stainless steel<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-SAT = stainless steel satin finish<br />
Lever handle pair loose:<br />
WG lever handle pair (without round roses) suited for<br />
DORMA-locks for glass doors, square 8 mm, with a<br />
bearing made of stainless steel ø18/16 mm.<br />
When ordering please indicate the thickness of the<br />
glass and the type of DORMA-lock, e.g. 1 pair 1752,<br />
E-SAT suited for a DORMA-lock for glass doors.<br />
GEOS-lever handle set with roses<br />
GEOS-lever handle set with round roses D6 or D6K,<br />
suited for DORMA-locks for glass doors, square 8<br />
mm, without supporting extensions.<br />
When ordering please indicate the thickness of the<br />
glass and the type of DORMA-lock needed, e.g. 1 set<br />
1754/D6K, E-SAT suited for a DORMA-lock for glass<br />
doors model Studio Rondo.<br />
GEOS-entrance set:<br />
Please indicate, if the knob has to be mounted on the<br />
lock-side or on the counter-plate-side.<br />
In order to mount a knob of a GEOS-entrance set, the<br />
DORMA-lock has to be sent <strong>Grundmann</strong> first.<br />
<strong>Grundmann</strong> | Supplementary Products 157
GEOS Fittings for Commercial and<br />
Public Sectors<br />
Hospital<br />
GEOS<br />
A person who has two dextrous hands, and<br />
powerful arms usually has difficulty understanding<br />
the problems that confront people with<br />
special needs when it comes to opening doors.<br />
The products shown on this page have an extended<br />
lever arm and have been expertly developed<br />
in accordance with ergonomic criteria. A door<br />
that is fitted with the Model 1754SM can also be<br />
opened with your cane if necessary.<br />
Design:<br />
GRUNDMANN<br />
lever handle for disabled people<br />
model 1754SM/D6<br />
with glide bearing and spring<br />
assistance on one side<br />
prices see page 373<br />
Technical details<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright*<br />
E-SAT = stainless steel satin finish*<br />
* 1754SM is only available in F1-SAT and P-BE<br />
Tender text<br />
for flush door leaves made of wood or steel<br />
GEOS lever handle for disabled people,suited for<br />
homes for the aged oder hospitals, with round roses<br />
and glide bearing.<br />
Lever handle with spring assistance, anti-loosening<br />
protected and fully adjustable lever handle connection<br />
with solid square spindle, roses with hidden<br />
screws.<br />
Finish e.g. aluminium silver anodized satin finish,<br />
e.g. GEOS 1754SM/D6 F1-SAT.<br />
Advices and patterns of finishes see «Explanations»,<br />
necessary ordering information see price-chapter.<br />
158 <strong>Grundmann</strong> | Supplementary Products
hospital lever handle<br />
model 1754KH/D6K<br />
with ball bearing<br />
prices see page 373<br />
WC-thumb turn for disabled people<br />
model 684ASM<br />
prices see page 373<br />
Technical details<br />
Lever handle model 1754KH/D6K Lever handle model 1754SM/D6 (see below) Lever handle model 1754/D6K/86SM<br />
aluminium: ø 51 mm<br />
stainless steel: ø 50 mm<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
aluminium: ø 51mm<br />
stainless steel: ø 50 mm<br />
<br />
SUPPLE-<br />
MENTARY<br />
PRODUCTS<br />
<br />
38<br />
90<br />
8<br />
ø20<br />
72<br />
56<br />
ø 51 mm<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
240<br />
Modell 684ASM/686T<br />
<br />
<strong>Grundmann</strong> | Supplementary Products 159
WG Name plates<br />
Name Plates<br />
Door Peephole<br />
We probably need not convince you of the usefulness<br />
of a name plate at all – or else how can<br />
one orientate? A door peep hole can also be integrated<br />
in this part according to individual security<br />
requirements. Looking through the door peep<br />
hole gives many people a sense of security as the<br />
TOP<br />
bona fides of a visitor is known beforehand.<br />
Design: GRUNDMANN<br />
name plate 1791R E-SAT<br />
with numeral engraving, name bar and door peep hole<br />
prices see page 374<br />
name plate 1793R F1-SAT<br />
with name engraving and door peep hole<br />
prices see page 374<br />
Technical details<br />
Peephole model 580 Peephole model 582, fire retardant and suited for different climates<br />
ø20<br />
door thickness<br />
ø17<br />
¿ 20<br />
door thickness<br />
¿ 17<br />
Door peepholes 580 and 582 are fitted with a<br />
high-quality 170° wide-angle lens.<br />
5 2<br />
ø14<br />
4 2<br />
¿ 14<br />
Name plates made by <strong>Grundmann</strong> are available with<br />
or without name bar or visiting card holder. In the<br />
most elegant version a name engraving is available.<br />
The name plates can be ordered with or without door<br />
peepholes.<br />
Weather-proof door peepholes<br />
With variant R you have the traditional peephole 580<br />
in a non fire-resistant version, the climate-resistant<br />
and fire-resistant peephole 582 is supplied in the RT<br />
variant. For arbor doors, or if there is possibility of<br />
condensation (different climates inside/outside) we<br />
recommend using the peephole 582, i.e. the climateresistant<br />
variant of the peephole!<br />
The peephole 582 is tested in accordance with<br />
ÖNORM EN <strong>11</strong>21 (climate C-extended test of 28<br />
days/interior temp. + 23°C/ exterior temp. + 3°C,<br />
and climate D-24 hour test/interior temp. +23°C/<br />
exterior temp. -15°C). We cannot provide a guarantee<br />
against filming over under conditions that deviate<br />
from those cited above.<br />
The combination with peephole 582 is also<br />
approved for fire protection doors in accordance<br />
with ÖNORM B 3850, EI 30 (formerly<br />
T30).<br />
Door peephole without name plate<br />
Models 580 and 582 can be mounted separately as<br />
well.<br />
Door thickness 27–46 mm<br />
Please specify special door thicknesses<br />
Finishes models<br />
1791R(T), 1793R(T), 1795R, 1797R<br />
POL = aluminium extra bright<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
160 <strong>Grundmann</strong> | Supplementary Products
peephole<br />
model 580 MS-Cr<br />
prices see page 374<br />
Technical details<br />
Name plates model 1791R(T) Model 1793R(T) Model 1795R Model 1797R<br />
ø14<br />
70<br />
15<br />
70<br />
R 6<br />
96<br />
120<br />
R 6<br />
Wilh. <strong>Grundmann</strong><br />
120<br />
6<br />
6<br />
22<br />
ø14<br />
<br />
<br />
<br />
<br />
<br />
22<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
96<br />
6<br />
Wilh. <strong>Grundmann</strong><br />
15<br />
name bar model 589<br />
Examples<br />
Letters right and left positioned + name bar letters right and left positioned + engraving letters right positioned + name bar letters right positioned + engraving<br />
SUPPLE-<br />
MENTARY<br />
PRODUCTS<br />
TOP 1234 TOP 1234<br />
Wilh. <strong>Grundmann</strong><br />
1234 1234<br />
Wilh. <strong>Grundmann</strong><br />
<strong>Grundmann</strong> | Supplementary Products<br />
161
GEOS Around the door<br />
Doors stops<br />
GEOS<br />
The subject of opening and closing doors also<br />
includes these small, easily-overlooked products<br />
for floor or wall that are usually forced into a<br />
corner and then if necessary are called on to<br />
stop an entire door leaf. It would not hurt us at<br />
all to direct a little more attention to these silent<br />
companions of daily life – even more so when<br />
they are as nice looking as the model 1737 with<br />
its elegant anthracite-colour, 3-piece rubber<br />
floor-mounted door stop<br />
model 1737<br />
design Michael Schaefer<br />
prices see page 376<br />
cladding.<br />
Design: GRUNDMANN,<br />
SCHAEFER-DESIGN<br />
wall-mounted door stop<br />
model 1735<br />
design <strong>Grundmann</strong><br />
prices see page Seite 376<br />
floor mounted door stop<br />
model 1736<br />
design <strong>Grundmann</strong><br />
prices see page 376<br />
Technical details<br />
Wall-mounted door stop model 1735 Floor-mounted door stop model 1736 Floor-mounted door stop model 1737<br />
¿20<br />
20<br />
rubber ring<br />
ø50<br />
8<br />
ø8<br />
51<br />
dowel S12<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
75/90/120<br />
<br />
Standard-Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
P-BE = aluminium powder coated<br />
Other colours available on request for a<br />
surcharge.<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
162 <strong>Grundmann</strong> | Supplementary Products<br />
Suitable for stresses < 80 kg<br />
recommended by the producer<br />
Tender text<br />
Model 1735: Wall-mounted door stop for private and<br />
public use, fastening with dowel S 10 on the wall,<br />
avaible lenghts 75, 90 or 120 mm, door weight up to<br />
80 kg, e.g. 1735, length 75 mm, E-SAT<br />
Model 1736: floor-mounted door stop, stable design<br />
for public use, total height 38 mm, fastening with<br />
dowel S 12 on the floor, door weight up to 80 kg,<br />
e.g. 1736, E-SAT<br />
Model 1737: Floor-mounted stoor stop, stable and<br />
good-looking design for public use, total height 35<br />
mm, total height with base plate (6 mm)<br />
41 mm, fastening with dowel S 12 on the floor,<br />
door weight up to 80 kg, e.g. 1737 E-SAT
GEOS Around the door<br />
Doors stops<br />
GEOS<br />
The practical advantage of the two GEOS door<br />
stops on this side is that large floor cleaning<br />
machines can pass over them. It enormously<br />
facilitates the work of the cleaning staff. And<br />
in addition, they cushion heavy doors up to 80<br />
kg. GEOS products are accustomed to a lot of<br />
things.<br />
Design: GRUNDMANN<br />
floor mounted door stop<br />
model 1739<br />
design <strong>Grundmann</strong><br />
prices see page 376<br />
floor mounted door stop<br />
model 1739/1739U<br />
design <strong>Grundmann</strong><br />
prices see page 376<br />
Technical details<br />
Floor-mounted door stop model 1739/1739U with base plate<br />
<br />
Floor-mounted door stop model 1739 without base plate<br />
<br />
SUPPLE-<br />
MENTARY<br />
PRODUCTS<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finish<br />
E-SAT = stainless steel satin finish<br />
Suitable for stresses < 80 kg<br />
recommended by the producer<br />
Tender text<br />
Model 1739: Floor-mounted stoor stop, for floor cleaning<br />
machines, stable and good-looking design for<br />
public use, total height without base plate 21 mm,<br />
total height without base plate (13 mm) 34 mm,<br />
fastening with dowel S10 on the floor, door weight<br />
up to 80 kg, e.g. model 1739 E-SAT<br />
<strong>Grundmann</strong> | Supplementary Products 163
WG Around the door<br />
Door Stop<br />
WG<br />
While robust door stops are necessary in the<br />
commercial area to stop heavy commercial<br />
doors, one can also mount more delicate parts<br />
by all means in the private residential area. Of<br />
course, one should not dispense with these<br />
unobtrusive accompaniments completely. For,<br />
you not only preserve the doors and walls, but<br />
also the nerves of the home keeper.<br />
floor-mounted door stop<br />
model 1734 in E-SAT<br />
designed by <strong>Grundmann</strong><br />
prices see page 377<br />
Design: GRUNDMANN<br />
Technical details<br />
Floor-mounted door stop model 1734 (height: 31 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Suitable for stresses < 40 kg<br />
recommended by the producer<br />
Finishes<br />
F1-SAT = aluminium silver anodized satin finish<br />
E-SAT = stainless steel satin finish<br />
Tender text<br />
Floor-mounted door stop for house and home, diameter<br />
with rubber ring ø 31 mm (without rubber ring<br />
ø 25 mm), total height 31 mm, mounting with dowel<br />
S8 on the floor, door weight up to 40 kg, e.g. 1734,<br />
E-SAT<br />
Mounting<br />
without removing the rubber ring<br />
164 <strong>Grundmann</strong> | Supplementary Products
GEOS Around the door<br />
Wardrobe Hook<br />
GEOS<br />
Often a wardrobe hook must handle a lot of<br />
stress. Even more so if it wants to be included<br />
in the family of solid GEOS products. This hook<br />
has been designed to be appropriately stable. An<br />
eye catcher and functional covering of the install<br />
area is provided in the form of a plastic rose<br />
that is available in the colours black, anthracite,<br />
blue, and white. If desired the rose can also be<br />
imprinted with corporate logos, and thus it can<br />
be integrated in a corporate design concept. The<br />
hooks can either be installed individually or as a<br />
4-hook set on a stainless steel panel.<br />
Design: MICHAEL WAGNER<br />
wardrobe hook 6230<br />
with plastic cover rose<br />
prices see page 377<br />
Technical details<br />
Wardrobe hook model 6230 Fixing plate model 6235<br />
<br />
<br />
<br />
SUPPLE-<br />
MENTARY<br />
PRODUCTS<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finish hooks and cover-plate 6235/1<br />
E-SAT = stainless steel satin finish<br />
Finish base plate 6235/2<br />
iron galvanized<br />
Finish cover roses<br />
plastic coated (P-BE)<br />
P-BE white, equivalent RAL 9010<br />
P-BE blue, equivalent RAL 5015<br />
P-BE anthracite, equivalent RAL 7016<br />
P-BE black, equivalent RAL 90<strong>11</strong><br />
Available as long as stock lasts.<br />
<strong>Grundmann</strong> | Supplementary Products 165
166 <strong>Grundmann</strong> Introduction | Mortise Locks<br />
On Opening and Closing. <strong>2010</strong>/<strong>11</strong>
product group<br />
WG-locks<br />
GEOS-locks<br />
Explanations<br />
Series 300<br />
Series 400<br />
Deadbolt and Roll Latch Locks<br />
Lock for Glass Doors<br />
Strike Plates<br />
168<br />
176<br />
178<br />
180<br />
182<br />
184<br />
GEOS-LOCKS,<br />
WG-LOCKS
Locks | Introduction<br />
Use Categories | Classification Key<br />
ÖNORM EN 12209 governs the basic requirements for<br />
locks throughout Europe.<br />
Dimensions and additional requirements are stipulated<br />
in ÖNORM B 5330.<br />
The standard provides an <strong>11</strong>-digit classification key to<br />
help the user in selecting the right lock implementation.<br />
For our locks please refer to positions 1-4 and 7 of the<br />
classification key in accordance with ÖNORM EN 12209,<br />
from the table below:<br />
Special hints:<br />
For locks with automatic latch:<br />
When using an electric door opener strike plate,<br />
in order to prevent any problems, we do not<br />
recommend the use of a stop latch.<br />
For locks with latch lever:<br />
Check the smooth movement of the latch. High<br />
pressure of the door seal on the latch can highly<br />
restrict the operation of the latch lever with the<br />
keys.<br />
Lock series<br />
300 (K) 400 (K) 451 MVS 900<br />
Class Use category<br />
1 Residential ●<br />
2 Office building doors ● ● ●<br />
3 Public buildings ● ● ●<br />
Class Continuous Latch<br />
function load<br />
L 100.000 25 N<br />
M 200.000 25 N ● ● ● ●<br />
Class Door mass Closing force<br />
max.<br />
max.<br />
4 bis 100 kg 25 N ●<br />
5 bis 200 kg 25 N ● ● ●<br />
Suited for fire-protection/<br />
smoke-protection doors<br />
in accordance with ÖNORM B 3858, 30 minutes<br />
Class Protective effect<br />
(suitable for use on<br />
anti-burglary doors)<br />
1 Minimum protection, ●<br />
not drill-resistant<br />
2 Low protective effect ●<br />
not drill-resistant<br />
3 Medium protective ●<br />
not drill-resistant<br />
4 High protective effect ●<br />
not drill-resistant<br />
Series 451 locks have a reinforced locking mechanism<br />
and thus they are also suitable for anti-burglary exterior<br />
doors.<br />
Locks – classification key in accordance with ÖNORM EN 12209<br />
1 2 3 4 5 6 7 8 9 10 <strong>11</strong><br />
GRUNDMANN<br />
lock types<br />
Use category<br />
Continuous<br />
function<br />
Latch load<br />
Door mass and<br />
closing force<br />
Suitability for<br />
use on fire<br />
prot. & smoke<br />
prot. doors<br />
Security<br />
Corrosion and<br />
temperature<br />
resistance<br />
Protective<br />
effect and drill<br />
resistance<br />
Door-based<br />
application<br />
range<br />
Type of key<br />
activation<br />
and locking<br />
mechanism<br />
Type of<br />
spindle<br />
activation<br />
Key<br />
designation<br />
300R(K) 1 M 4 0 0 A 1 B F 2 0<br />
335 1 M 4 0 0 A 0 B 0 2 0<br />
320R(K), 321R(K) 1 M 4 0 0 A 1 B C 2 0<br />
340R(K) 1 M 4 0 0 A 1 B G 2 0<br />
420(K), 421(K) 3 M 5 1 0 E 2 B C 2 0<br />
440(K) 3 M 5 1 0 E 2 B G 2 0<br />
451 3 M 5 1 0 E 3 B C 2 0<br />
451F 3 M 5 1 0 E 4 B C 2 0<br />
421E (F) 3 M 5 1 0 E 4 B C 2 0<br />
MVS 900 3 M 5 1 0 E 4 B C 2 0<br />
168 <strong>Grundmann</strong> Introduction | Mortise Locks
l<br />
Locks | Introduction<br />
Principle lock components and Principle lock dimensions<br />
D<br />
K<br />
S<br />
b<br />
1<br />
2<br />
3<br />
6<br />
5<br />
i<br />
4<br />
9<br />
10<br />
E<br />
h<br />
8<br />
7<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
1 Forend<br />
2 Case<br />
3 Latch<br />
4 Latch spring<br />
5 Lock follower<br />
6 Follower spring<br />
7 Deadbolt<br />
8 Detainer<br />
9 Latch-lever<br />
10 Striking plate<br />
d Distance from forend to the middle of the<br />
follower (backset)<br />
k Case width<br />
e Distance from the middle of the key hole to the<br />
middle of the follower hole<br />
l<br />
b<br />
s<br />
h<br />
i<br />
Forend length<br />
Forend width<br />
Forend thickness<br />
Case height<br />
Case thickness<br />
<strong>Grundmann</strong> Introduction | Mortise Locks 169
Mortise Locks | Direction Determination for Doors, Fittings and Mortise Locks<br />
inside<br />
door left left<br />
inwards outwards<br />
lock left left<br />
lever handle set left right<br />
entrance set left right<br />
lever handle pair left right<br />
lever handle<br />
female part left right<br />
lever handle<br />
male part right left<br />
door left inwards<br />
outside<br />
inside<br />
outside<br />
door left outwards<br />
inside<br />
outside<br />
door right right<br />
outwards inwards<br />
lock right right<br />
lever handle set left right<br />
entrance set left right<br />
lever handle pair left right<br />
lever handle<br />
female part left right<br />
lever handle<br />
male part right left<br />
door right outwards<br />
Direction determination<br />
for half sets<br />
left<br />
= showing to the left<br />
right = showing to the right<br />
inside<br />
outside<br />
If handed left/right data is required,<br />
this will be indicated for the relevant<br />
products in the catalogue.<br />
Please enter the opening direction of<br />
the door (e.g. right outwards) and not<br />
the direction in which the lever handle<br />
should be mounted.<br />
door right inwards<br />
170 <strong>Grundmann</strong> Introduction | Mortise Locks
Mortise Locks | Direction Determination for Doors, Fittings and Mortise Locks<br />
inside<br />
door left left<br />
inwards outwards<br />
DIN left DIN left<br />
lock left left<br />
lever handle set left right<br />
entrance set left right<br />
lever handle pair left right<br />
lever handle<br />
female part left right<br />
lever handle<br />
male part right left<br />
door left inwards<br />
outside<br />
inside<br />
outside<br />
door left outwards<br />
inside<br />
outside<br />
door right right<br />
outwards inwards<br />
DIN right DIN right<br />
lock right right<br />
lever handle set left right<br />
entrance set left right<br />
lever handle pair left right<br />
lever handle<br />
female part left right<br />
lever handle<br />
male part right left<br />
door right outwards<br />
Direction determination<br />
for half sets<br />
left<br />
= showing to the left<br />
right = showing to the right<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
inside<br />
outside<br />
If handed left/right data is required,<br />
this will be indicated for the relevant<br />
products in the catalogue.<br />
Please enter the opening direction of<br />
the door (e.g. right outwards) and not<br />
the direction in which the lever handle<br />
should be mounted.<br />
door right inwards<br />
<strong>Grundmann</strong> Introduction | Mortise Locks 171
Locks with Crank Latch<br />
Functioning<br />
The crank lifter presses the latch already back while touching the strike<br />
plate. Therefore the door closing force is reduced as well as the noise<br />
while closing the door. The latch closes without operating the lever<br />
handle. We recommend especially the combination of locks wih crank<br />
latches together with door closers.<br />
→ Crank latches are offered for series 300K and 400K<br />
→ Locks with crank latch series 300 are suited for private standard doors<br />
up to a recommended door weight of 40 kg (maximum allowed door<br />
weight 100 kg)<br />
→ For commercial and public sectors we recommend locks with<br />
crank latches series 400K and 450K, they are suited for an application<br />
on doors up to a door weight of 100 kg (maximum door weight<br />
200 kg).<br />
→ Both locks can be changed at any time into other locks of the same<br />
series (e.g. series 400 can be changed into series 400K or series<br />
300 can be changed into series 300K). Backfitting on existing doors is<br />
possible as well. (A small reoperation in the sector of the crank latch<br />
guarantees faultless functioning – see sketch).<br />
→ Mounting advice<br />
The lock has to be restemmed in the sector of the latch near<br />
the crank lifter in order to guarantee a faultless functioning.<br />
example<br />
mortise lock<br />
model 300RK<br />
with crank latch<br />
172 <strong>Grundmann</strong> Introduction | Mortise Locks
Locks with Clamping Follower<br />
Frequently lever handles wobble on new doors, because of a play<br />
between the lever handle spindle and the lock follower. Even if the<br />
lock and the fittings are mounted exactly according to the producers<br />
specifications and even if the dimensions of the lock follower<br />
amd the lever handle spindle correspond with the standards, this<br />
play cannot be avoided. The play even becomes bigger when the<br />
dimensions of the lock follower are situated in the above and the<br />
dimensions of the lever handle spindle are situated in the below<br />
tolerance sector.<br />
This play of tolerances is defined exactly in the ÖNORM EN 1906<br />
and allows for example for fittings (of category of use 3+4) a free<br />
movement of the corners up to 5 mm at the end of a lever handle<br />
of 75 mm length (that means up to 7 mm für a lever handle length<br />
of 140 mm, e.g. lever handle model GEOS 1754).<br />
→ Locks with the new clamping follower, which is integrated<br />
without surplus and as standard into the series 400 und 451,<br />
guarantee a functioning of the lock without any play. This play<br />
between the lever handle spindle and the lock follower is<br />
balanced by the clamping follower.<br />
Please note:<br />
Compensating bushes for lever handle spindles are not suited<br />
for locks with clamping followers!<br />
example<br />
mortise lock<br />
model 451<br />
with clamping follower<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
<strong>Grundmann</strong> Introduction | Mortise Locks 173
Locks with CE-marking<br />
According to directive 89/106/EWG of the European Union Council, the<br />
construction products that fulfill the specifications of this construction<br />
products directive can be put in circulation only with a CE mark.<br />
Construction products are building materials, components and systems<br />
which are manufactured to be integrated permanently in structurally<br />
identical systems of civil engineering.<br />
The Austrian standard EN 12209 is a harmonized standard and hence is<br />
also subject to the construction products directive. For this reason, fireresistant<br />
locks tested according to Austrian standard EN 12209 are to be<br />
provided with a CE mark<br />
For GRUNDMANN, the type designation for the EC certificate of conformity<br />
is 1359 - CPD - 0014.<br />
All mortise locks of the series 400 are therefore provided with the CE mark<br />
and the No. 1359 on the front plate. Every lock of this type is in addition<br />
provided with a label on the lock case, where the certification key according<br />
to the Austrian standard EN 12209 is also visible.<br />
- qualification<br />
2009<br />
1 2 3 x<br />
A-3170 Hainfeld<br />
1359-CPD-0014 EN 12209:2003 06<br />
TYP: 421 (K)<br />
3 M 5 1 0 E 2 B C 2 0<br />
174 <strong>Grundmann</strong> Introduction | Mortise Locks
Locks | Certificate of Conformity<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
<strong>Grundmann</strong> Introduction | Mortise Locks 175
WG Mortise Locks<br />
Series 300<br />
Series 300K<br />
WG<br />
<strong>Grundmann</strong> has been producing mortise locks<br />
in different designs and for different applications<br />
since our company was founded in 1894. For<br />
example Series 300 locks are frequently used for<br />
inner doors in living areas. Today as in 1894, we<br />
ensure that all lock leave our factory in tested,<br />
trouble-free condition. Simply look for the «WG»<br />
brand in the forend; it‘s worth it.<br />
mortise Lock<br />
model 320R<br />
with shift latch<br />
prices see page 380<br />
mortise lock<br />
model 320RK<br />
with crank latch<br />
prices see page 381<br />
Technical details<br />
Mortise locks series 300 and 300RK<br />
Application in domestic area under normal loading<br />
Recommended door weight:<br />
40 kg up to max. 100 kg<br />
checked ÖNORM EN 12209, category of use 1<br />
measures up to ÖNORM 5350<br />
300R = rounded forend (250 x 18 x 3)<br />
300RK = rounded forend only (250 x 18 x 3)<br />
300 = square forend (250 x 18 x 3)<br />
piano-piano<br />
On request with<br />
a low-noise latch «G»<br />
Articles no. 300, 320 and 340<br />
can be delivered at the same price<br />
and within the same time.<br />
Finishes series 300<br />
VZ = forend, dead bolt and latch silver-coloured<br />
galvanized and passivated<br />
Tender text series 300<br />
Mortise lock for interior doors up to a recommended<br />
door weight of 40 kg (max. door weight 100 kg), with<br />
shift latch, adjustable left- or right-sided, for profile<br />
cylinder (or grooved bit lock or WC and bathroom),<br />
latch with retaining effect, with or without latch<br />
lever, corresponds to ÖNORM EN 12209, category of<br />
use 1, security class 1, dimensions up to ÖNORM B<br />
5350. Finishes see above, e.g. 340 VZ<br />
Finishes series 300K<br />
VZ = silver-coloured galvanized and passivated<br />
E-POL = forend made of stainless steel, polished,<br />
latch and dead bolt nickeled, case galvanized<br />
and zinc chromate yellow<br />
E-SAT = forend made of stainless steel, satin finish,<br />
latch and dead bolt nickeled, case galvanized<br />
and zinc chromate yellow<br />
Tender text series 300K<br />
Mortise lock with crank latch up to a recommended<br />
door weight of 40 kg (max. door weight 100 kg), for<br />
profile cylinder without latch lever (or grooved bit<br />
lock or WC and bathroom), with double crank lever<br />
for low closing force, striking and closing noise dampening,<br />
latch with retaining effect, corresponds to<br />
ÖNORM EN 12209, category of use 1, security class<br />
1, dimensions up to ÖNORM B 5350. Finishes see<br />
above, e.g. 320K VZ<br />
176 <strong>Grundmann</strong> | WG | Mortise Locks for House and Home
Technical details<br />
Mortise locks series 300, model 320 (countersink for lock cases = lock case thickness und 2 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Locks<br />
Measure in mm<br />
for bit for profi le<br />
keyhole cylinder<br />
WC<br />
Distance E 90 88, 90 90<br />
<br />
<br />
Technical details<br />
Mortise locks series 300RK, model 300RK, 320RK (countersink for lock cases = lock case thickness und 2 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Mortise locks<br />
Measure in mm<br />
for bit for profi le<br />
keyhole cylinder<br />
WC<br />
Distance E 90 88, 90 90<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
left <br />
right <br />
<br />
<br />
left<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
4.5x30<br />
<strong>Grundmann</strong> | WG | Mortise Locks for House and Home 177
GEOS Mortise Locks<br />
Series 400<br />
Series 400K<br />
GEOS<br />
Series 400 locks are selected for buildings<br />
that are frequented by large numbers of<br />
people, such as schools, hospitals, or government<br />
buildings. These are products that are<br />
built to bear the traffic so-to-speak.<br />
mortise locks<br />
model 420R<br />
with shift latch<br />
prices see page 382<br />
mortise locks<br />
model 420RK<br />
with crank latch<br />
prices see page 383<br />
Technical details<br />
Mortise locks series 400 and 400K<br />
As standard with clamping follower<br />
Application on doors in commercial or public areas<br />
under heavy loading<br />
Recommended door weight from 100 kg<br />
up to max. 200 kg<br />
suited for ÖNORM EN 12209, category of use 3<br />
measures up to ÖNORM 5350<br />
Available at the same price:<br />
rounded forend (=R) 250x18x4<br />
square forend 300x20x4<br />
rounded forend (=R) 300x20x4<br />
<br />
<br />
Fire retardant 30 minutes<br />
checked ÖNORM B 3858<br />
Finishes series 400 and 400K<br />
NL = forend and case Niro-Look, latch and<br />
dead bolt silver-coloured zinc chromate<br />
yellow<br />
E-POL = forend made of stainless steel, polished,<br />
latch and dead bolt nickeled, case galvanized<br />
and zinc chromate yellow<br />
E-SAT = forend made of stainless steel, satin finish,<br />
latch and dead bolt nickeled, case galvanized<br />
and zinc chromate yellow<br />
Tender text series 400<br />
Mortise lock with shift latch for doors in commercial<br />
or public sectors up to a recommended door weight<br />
of 100 kg (max. door weight 200 kg), with clamping<br />
follower (the handle spindle is free from float), latch<br />
with retaining effect, reinforced dead bolt, suited<br />
for profile cylinder (or grooved bit lock or WC and<br />
bathroom), with or without latch lever, fire retardant<br />
30 minutes according to ÖNORM B 3858, checked<br />
ÖNORM EN 12209, category of use 3, security<br />
class 2, dimensions up to ÖNORM B 5350, e.g.<br />
421R/8cm/250x18x4NL<br />
Tender text series 400K<br />
Mortise lock with crank latch for doors in commercial<br />
or public sectors up to a recommended door weight<br />
of 100 kg (max. door weight 200 kg), with clamping<br />
follower (the handle spindle is free from float),latch<br />
with retaining effect, reinforced dead bolt, suited<br />
for profile cylinder (or grooved bit lock or WC and<br />
bathroom), with double crank lever for low closing<br />
force, striking and closing noise dampening, latch<br />
with retaining effect, with or without latch lever, fire<br />
retardant 30 minutes according to ÖNORM B 3858,<br />
checked ÖNORM EN 12209, category of use 3, security<br />
class 2, dimensions up to ÖNORM B 5350, e.g.<br />
421RK/8cm/250x18x4 NL<br />
178 <strong>Grundmann</strong> | GEOS | Locks for Public and Private Sectors
Technical details<br />
Mortise locks series 400 (countersink for lock cases = lock case thickness plus 2 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Mortise locks<br />
backset<br />
D<br />
50<br />
for bit<br />
60<br />
keyhole<br />
70<br />
50<br />
for profi le<br />
60<br />
cylinder<br />
70<br />
WC<br />
50<br />
60<br />
70<br />
distance<br />
E<br />
90<br />
88<br />
90<br />
case<br />
width K<br />
80<br />
90<br />
100<br />
80<br />
90<br />
100<br />
80<br />
90<br />
100<br />
follower<br />
square N<br />
8.5<br />
8.5<br />
8.5<br />
left<br />
Technical details<br />
Mortise locks series 400K (countersink for lock cases = lock case thickness plus 2 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Mortise locks<br />
backset<br />
D<br />
50<br />
for bit<br />
60<br />
keyhole<br />
70<br />
50<br />
for profi le<br />
60<br />
cylinder<br />
70<br />
WC<br />
50<br />
60<br />
70<br />
distance<br />
E<br />
90<br />
88<br />
90<br />
case<br />
width K<br />
80<br />
90<br />
100<br />
80<br />
90<br />
100<br />
80<br />
90<br />
100<br />
follower<br />
square N<br />
8.5<br />
8.5<br />
8.5<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
left<br />
right<br />
<br />
<strong>Grundmann</strong> | GEOS | Locks for Public and Private Sectors 179
WG Mortise Locks<br />
Deadbolt and<br />
Roll latch locks<br />
WG<br />
Basically locks exist to guarantee security and<br />
privacy. However often precisely the opposite<br />
is also desired, for example in Kindergartens.<br />
Occasionally it can occur that a child locks himself/herself<br />
in the lavatory. The 48WC lock guarantees<br />
that the Kindergarten teacher can help<br />
out and open the door from outside at any time.<br />
roll latch lock<br />
model 30Z<br />
prices see page 384<br />
deadlock<br />
model 48R<br />
prices see page 384<br />
Technical details<br />
Deadlock and Roll latch lock<br />
Finishes locks<br />
NL = forend and case Niro-Look, latch and dead<br />
bolt silver-coloured zinc chromate yellow<br />
Pair of thumb turns 684GA/684GT<br />
matching art.no. 48RWC, suited as additional lock<br />
for kindergarten<br />
Finishes pair of thumb turns<br />
F1-SAT = aluminium silver anodized satin finish<br />
F2 = aluminium new silver anodized<br />
MS = brass extra bright<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Tender text for deadlocks<br />
Mortise lock, case 95 mm, length of the forend 170<br />
mm, with dead bolt, suited for profile cylinder (or<br />
grooved bit lock or WC and bathroom), with square<br />
7mm, suited for the application of a pair of WC<br />
thumb turns for kindergarten.<br />
Dimensions up to ÖNORM B 5350.<br />
Finish: Niro-Look (NL), other finishes see above, e.g.<br />
48RWC NL<br />
Roll latch lock 30Z<br />
recommended door weight from 40 kg up to 100 kg<br />
max.<br />
Tender text for<br />
mortise locks with roll latch<br />
Mortise lock with roll latch for entrance doors or<br />
swing doors with pull handles, suited for profile<br />
cylinder, reinforced dead bolt, reinforced design,<br />
adjustable roll latch.<br />
Dimensions up to ÖNORM B 5350.<br />
Finish: Niro-Look (NL), other finishes see above,<br />
e.g. 30Z/8cm/300x20x4 NL<br />
180 <strong>Grundmann</strong> | GEOS | Mortise Locks for Private and Public Sectors
Technical details<br />
Dead locks model 48R Model 48RWC Matching pair of thumb turns 684GA/684GT<br />
80<br />
80<br />
15<br />
case Kasten<br />
14<br />
15<br />
case Kasten<br />
14<br />
38 34 35<br />
38<br />
31<br />
95<br />
9<br />
35<br />
170<br />
38 34 35<br />
7<br />
38<br />
29<br />
95<br />
9<br />
170<br />
4<br />
50<br />
4.5x30<br />
20<br />
15<br />
4<br />
50<br />
20<br />
<br />
<br />
<br />
15<br />
<br />
<br />
<br />
Technical details<br />
Roll latch lock 30Z<br />
<br />
<br />
adjustable from<br />
4-12 mm<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
case<br />
<br />
<br />
<br />
<br />
<br />
Mortise locks<br />
measure in mm for profi le cylinder<br />
distance E 50 | 60 | 70<br />
case width K 80 | 90 | 100<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
<strong>Grundmann</strong> | GEOS | Mortise Locks for Private and Public Sectors 181
WG Mortise Locks<br />
For glass doors<br />
Series 300GT<br />
WG<br />
With the 300GT series, <strong>Grundmann</strong> offers for the<br />
first time an own glass door lock with ÖNORM<br />
sizes and for backset 50. The lock, which can be<br />
mounted on glass from 5 mm thickness, can on<br />
request be also adapted for the new TAC electronic<br />
access control system.<br />
lock 320GT<br />
can be combined with D70-bearing<br />
prices see page 385<br />
mounting plate (2 mm) - screwing-side<br />
Technical details<br />
Locks for glass doors series 300GT<br />
Application in domestic area under normal loading<br />
40 kg (up to max. 60 kg)<br />
Finish of the lock situated inside<br />
VZ = forend, dead bolt and latch silver-coloured<br />
galvanized and passivated<br />
Handed left/right data and direction determination<br />
of the door is required when ordering.<br />
Fittings are checked according to EN 1906,<br />
category of use grade 2.<br />
Tender text for scew-on locks prepared for being<br />
mounted on glass doors:<br />
Screw-on locks, prepared for the mounting on glass<br />
doors, recommended door weight of 40 kg (max. door<br />
weight 60 kg), thickness of glass 6-12 mm, handed<br />
left/right data required, for profile cylinder, with or<br />
without latch lever(or WC and bathroom),<br />
latch with retaining effect, dimensions up to ÖNORM<br />
B 5350.<br />
Finish: Covering case stainless steel satin finish<br />
(E-SAT), lock situated inside silver-coloured<br />
galvanized and passivated (VZ)<br />
Please note:<br />
Only the lever handle with a D70 residential rose can<br />
be combined with the glass door lock. The fittings<br />
are supplied with a shortened handle neck.<br />
The dimensions of the lock correspond to ÖNORM<br />
B 5350.<br />
Glass doors in combination with standard steel<br />
frame: max. 8 mm glass thickness possible<br />
A minimum rebate depth of 28 mm is required for 10<br />
mm glass thickness!<br />
182 <strong>Grundmann</strong> | GEOS | Mortise Locks for Private and Public Sectors
Technical details<br />
Locks for glass doors series 300GT<br />
Counter case (drawing of the borehole positiones in the glass)<br />
building’sreference level<br />
1000 (building’s refrerence level) 50<br />
30<br />
96.25 +0.1 -0.1<br />
ÖNORM PZ 88<br />
26<br />
84<br />
DM50<br />
. . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . .<br />
. . . . . . .<br />
. . . . . . .<br />
. . . . . . . .<br />
. . . . . . . .<br />
. . . . . . . . . .<br />
. . . . . . . . .<br />
. . . . . . . . . .<br />
ø49.5<br />
ø50<br />
R 8.5<br />
glass surface<br />
. . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . 130 . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
.<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . .<br />
. . . . . . . . . . . . .<br />
. . . . . . . . . . . .<br />
. . . . . . . . . . .<br />
. . . . . . . . . . .<br />
. . . . . . . . . .<br />
. . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . .. . . . . . . . . .<br />
. .<br />
. . . . . . . . .<br />
. . . . . . . . . . . . . . . . .. . . . . . . . . . .<br />
. .<br />
. . . . . .<br />
WORKING FACE FOR BUILDING’S REFERENCE LEVEL<br />
72 86<br />
2<br />
ø20<br />
7<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
.<br />
. .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
. . .<br />
. .<br />
. . .<br />
16 7<br />
12<br />
8 +0.2 -0.2<br />
ø20<br />
33.2 51.7<br />
59<br />
180<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
building´s reference level<br />
1000 (building´s reference level) 50<br />
The counter-case is glued - no boreholes<br />
required on the locked door wing side.<br />
93.75 +0.1<br />
-0.1<br />
50 +0.1 -0.1<br />
-0.1<br />
ø50 +0.1<br />
-0.1<br />
ø50 +0.1<br />
glass surface<br />
WORKING FACE FOR BUILDING’S REFERENCE LEVEL<br />
Direction determination<br />
Locks für glas doors series 300GT<br />
inside<br />
inside<br />
outside<br />
outside<br />
LE - door left inwards<br />
RA - door right inwards<br />
inside<br />
outside<br />
inside<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
outside<br />
LA - doors left outwards<br />
RE - doors right outwards<br />
<strong>Grundmann</strong> | GEOS | Mortise Locks for Private and Public Sectors 183
WG Mortise Locks<br />
Strike plates<br />
GEOS + WG<br />
A lock without strike plate usually represents<br />
only a partial solution. In our catalogue you will<br />
find strike plates for a wide variety of applications:<br />
Square or round, angled or straight, and<br />
even with cover caps behind the apertures that<br />
can cover up unsightly routing in the door case.<br />
strike plate 3/W<br />
for mortise locks<br />
series 300 and 400<br />
prices see page 386<br />
strike plate 7/W<br />
for dead locks<br />
prices see page 386<br />
Technical details<br />
Strikes plates series 3 and series 7<br />
Finishes series 3<br />
VZ = silver-coloured galvanized and passivated<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
Finishes series 7<br />
NL = Niro-Look<br />
Tender text for strike plates series 3<br />
(3/W, 3/WS, 3/WR, 3/WSR)<br />
Angled strike plates for locks according to ÖNORM<br />
B 5350 with latch and/or dead bolt, for rebated<br />
single-leaf doors, latch- and dead bolt-aperture<br />
straight/bossed, width of the blind side 10 or 27<br />
mm, apertures design A, angled/rounded, left/right<br />
handed adaptable.<br />
Finish: silver-coloured galvanized and passivated<br />
(VZ), other finishes see model, e.g. 3/WSR VZ<br />
Tender text for strike plates series 7<br />
(7/W, 7/WS)<br />
Angled strike plates for dead locks with a case<br />
height of 95 mm according to ÖNORM B 5350 with<br />
dead bolt, for rebated single-leaf doors, dead boltaperture<br />
straight, width of the blind side 10 or 27<br />
mm, angled, left/right handed adaptable.<br />
Finish: Niro-Look (NL), e.g. 7/W NL<br />
Tender text for strike plates model 3/D(R)B<br />
Flat strike plates for locks according to ÖNORM B<br />
5350 with latch and/or dead bolt, for non-rebated/<br />
double-leaf doors, latch- and dead bolt-aperture<br />
straight/bossed, apertures design A, angled/rounded,<br />
handed left/right data available.<br />
Finish: silver-coloured galvanized and passivated<br />
(VZ), other finishes see model, e.g. 3/DR VZ<br />
Tender text for strike plates model 7/D<br />
Flat strike plates for dead locks with a case height of<br />
95 mm according to ÖNORM B 5350, with dead bolt,<br />
for non-rebated/double-leaf doors, dead bolt-aperture<br />
straight, angled, left/right handed adaptable.<br />
Finish: Niro-Look (NL), e.g. 7/D NL<br />
184 <strong>Grundmann</strong> | WG | Locks for House and Home
Technical details<br />
Strike plate model 3/W Model 3/WS Model 3/WR Model 3/WSR Model 3/D(R)B<br />
<br />
<br />
<br />
<br />
24<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
210<br />
50 50 50 30<br />
6<br />
6<br />
6<br />
7.5<br />
12<br />
58 26<br />
13.5<br />
E-SAT: 1,5<br />
VZ: 2<br />
<br />
<br />
<br />
<br />
<br />
<br />
R 9<br />
This drawing shows a left-handed lock.<br />
Technical details<br />
Strike plate model 7/W model 7/WS model 7/D<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Technical details<br />
Cover caps model 275/1 Model 275/2 Model 275/3<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
GEOS-LOCKS,<br />
WG-LOCKS<br />
Model 275/1<br />
for strike plate countersink<br />
for bolt strike plates 6/PSR<br />
for bolt aperture<br />
countersink in mm: 16 x 34 x 12 (deep)<br />
finish = beige<br />
Model 275/2<br />
for strike plate countersink<br />
for anti-burglary strike plates 3/PSR<br />
for latch- and deadbolt aperture<br />
countersink in mm:16 x 66 x 13 (deep)<br />
finish = beige<br />
Model 275/3<br />
for strike plate countersink<br />
for normal strike plates<br />
for latch- and deadbolt aperture<br />
countersink in mm: 16 x 66 x 22 (deep)<br />
finish = beige<br />
<strong>Grundmann</strong> | WG | Locks for House and Home 185
On Opening and Closing. <strong>2010</strong>/<strong>11</strong><br />
186 <strong>Grundmann</strong> | Anti-burglary Mortise Locks
product group<br />
Anti-burglary<br />
Locks<br />
Series 421E(F) and 451(F)<br />
Anti-burglary Strike Plates<br />
and Hinge Guards<br />
Multi-point Lock<br />
MVS 900<br />
188<br />
190<br />
192<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
<strong>Grundmann</strong> | Anti-burglary Mortise Locks 187
GEOS Mortise Locks<br />
Series 421ER (EFR)<br />
Series 451(F)<br />
GEOS<br />
On the outside these locks are not noticeably different<br />
from other mortice locks for inside doors.<br />
However as is often the case, the inner qualities<br />
are what really matter. And this lock has a lot to<br />
offer: The lock 421E, for example, is equipped<br />
with a reinforced case, a solid steel bolt, integrated<br />
bend protection, and an additional latch.<br />
Consequently it has also been approved for<br />
ÖNORM EN 12209 protection class 4.<br />
All series are tested for door weights up to 200<br />
kg and are therefore suited for public areas<br />
under heavy loading.<br />
mortise lock<br />
model 451/451F<br />
with shift latch<br />
prices see page 390<br />
Technical details<br />
Mortise locks series 451, 451F and 421ER, 421EFR<br />
As standard with clamping follower<br />
Series 451<br />
Application on doors in commercial or public areas<br />
under heavy loading<br />
Recommended door weight from 100 kg<br />
up to max. 200 kg<br />
suited for ÖNORM EN 12209, category of use 3<br />
measures up to ÖNORM 5350, security class 3<br />
Series 451F<br />
Application on doors in the private sectors as well as<br />
on doors in commercial or public areas under heavy<br />
loading<br />
Recommended door weight from 100 kg<br />
up to max. 200 kg<br />
suited for ÖNORM EN 12209, category of use 3<br />
measures up to ÖNORM 5350, security class 4<br />
<br />
<br />
Fire retardant 30 minutes<br />
checked ÖNORM B 3858<br />
Series 421ER / 421EFR<br />
Application on anti-burglary doors<br />
Recommended door weight from 100 kg<br />
up to max. 200 kg<br />
suited for ÖNORM EN 12209, category of use 3<br />
measures up to ÖNORM 5350, security class 4<br />
Finish<br />
NL = forend and case Niro-Look, latch and dead<br />
bolt silver-coloured zinc chromate yellow<br />
Security features 421ER/EFR<br />
Reinforced lock case with integrated bend protection,<br />
latch lock, solid steel deadbolt with extended<br />
deadbolt head, reinforced safety lock.<br />
Because of the additional latch this lock has a<br />
second locking section (latch and deadbolt).<br />
451: Security class 3 according to ÖNORM<br />
EN 12209, admitted for anti-burglary doors<br />
checked ÖNORM B 5338 WK-1.<br />
451F: Security class 4 ÖNORM EN 12209<br />
– admitted for anti-burglary doors checked<br />
ÖNORM B 5338 WK-2.<br />
451ER/EFR: Security class 4 ÖNORM EN<br />
12209 – admitted for anti-burglary doors checked<br />
ÖNORM B 5338 WK-2.<br />
When using an electric door opener strike<br />
plate, in order to prevent any problems, we do<br />
not recommend the use of a stop latch.<br />
188 <strong>Grundmann</strong> | GEOS | Anti-burglary Locks
Tender text series 421ER/EFR,<br />
anti-burglary<br />
Mortise lock with shift latch for anti-burglary doors,<br />
recommended door weigth from 100 kg up to 200<br />
kg maximum, clamping follower (the handle spindle<br />
is free from float), reinforced latch with retaining<br />
effect and reinforced bolt, reinforced lock case with<br />
integrated bend protection, with/without stop latch,<br />
solid steel deadbolt with extended deadbolt head,<br />
reinforced safety lock. Because of the additional<br />
latch this lock has a second locking section (latch<br />
and deadbolt), fire retardant 30 minutes according<br />
to ÖNORM B 3858, checked ÖNORM EN 12209,<br />
category of use grade 3, security class 4, dimensions<br />
up to ÖNORM B 5350, finish: Nirolook (NL), e.g.<br />
421ER/8cm/300x20x4 NL<br />
As this lock matches the requirements of security<br />
class 4, it is also suited for the installation on<br />
WK-2 doors.<br />
Tender text series 451<br />
Mortise lock with shift latch for doors in commercial<br />
or public sectors up to a recommended door weight<br />
of 100 kg (max. door weight 200 kg), with clamping<br />
follower (the handle spindle is free from float), with<br />
double crank lever for low closing force, striking and<br />
closing noise dampening, latch with retaining effect,<br />
reinforced dead bolt, increased counter force of the<br />
dead bolt because of a reinforced tumbler, suited<br />
for profile cylinder, with latch lever, fire retardant<br />
30 minutes according to ÖNORM B 3858, checked<br />
ÖNORM EN 12209, category of use 3, security class<br />
3, dimensions up to ÖNORM B 5350. As this lock<br />
matches the requirements of security class 3, it is<br />
also suited for the installation on on WK 1 doors,<br />
e.g. 451R/8cm/300x20x4 NL<br />
Tender text series 451F<br />
Mortise lock with shift latch for doors in commercial<br />
or public sectors up to a recommended door weight<br />
of 100 kg (max. door weight 200 kg), with clamping<br />
follower (the handle spindle is free from float),<br />
latch with retaining effect, reinforced dead bolt,<br />
increased counter force of the dead bolt because<br />
of a reinforced tumbler, suited for profile cylinder,<br />
with or without latch lever, fire retardant 30 minutes<br />
according to ÖNORM B 3858, checked ÖNORM EN<br />
12209, category of use 3, security class 4, dimensions<br />
up to ÖNORM B 5350. As this lock matches<br />
the requirements of security class 4, it is also<br />
suited for the installation on on WK 2 doors, e.g.<br />
451F/8cm/300x20x4 NL<br />
Technical details<br />
Mortise locks series 451 and 451F (countersink for lock cases = lock case thickness plus 2 mm)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Mortise locks<br />
backset<br />
D<br />
50<br />
for profi le<br />
60<br />
cylinder<br />
70<br />
distance<br />
E<br />
88<br />
case<br />
width K<br />
80<br />
90<br />
100<br />
follower<br />
square N<br />
8.5<br />
Technical details<br />
Mortise locks series 421ER and 421EFR<br />
K<br />
Fallenstop<br />
abstellung latch<br />
62.5 34 35 60 30<br />
22<br />
12<br />
38<br />
38<br />
8.5<br />
21.5<br />
31 E 26<br />
175<br />
12<br />
14<br />
30 30 30 15<br />
300<br />
9<br />
Mortise locks<br />
backset<br />
D<br />
50<br />
for profi le<br />
60<br />
cylinder<br />
70<br />
distance<br />
E<br />
88<br />
case<br />
width K<br />
80<br />
90<br />
100<br />
follower<br />
square N<br />
8.5<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
4<br />
D<br />
20<br />
15<br />
left LI<br />
right RE<br />
<strong>Grundmann</strong> | GEOS | Anti-burglary Locks 189
WG Anti-burglary Locks<br />
Strike Plates and<br />
Hinge Guards<br />
WG<br />
Our burglar-proof 3/PSR strike plate has an angled<br />
screw fastening that offers protection against the<br />
strike plate being torn out. Hinge guards, in turn,<br />
protect the door from being levered out on the<br />
hinge side. Trust us - we know the tricks!<br />
anti-burglary<br />
strike plate<br />
adjustable<br />
model 3/PSR-V<br />
prices see page 391<br />
anti-burglary<br />
strike plate<br />
model 3/PSR<br />
prices see page 391<br />
anti-burglary<br />
strike plate<br />
model 9/E<br />
prices see page 391<br />
hinge guard<br />
model 4/BR<br />
prices see page 392<br />
Technische Details<br />
Anti-burglary strike plates, security strike plates, bolted strike plates und hinge guards<br />
Bossed design on request.<br />
Finish<br />
NL = Niro-Look<br />
Product description<br />
Anti-burglary strike plate 9/E<br />
for wooden door cases, incl. chipboard screws<br />
3 pieces 5 x 80 and 3 pieces 4,5 x 40<br />
left or right hand mounting<br />
Anti-burglary strike plate 3/PSR<br />
for wooden door cases, for front mortising (R8),<br />
incl. chipboard screws 3 pieces 4,5 x 40 and<br />
3 pieces 4,5 x 40 special, left or right hand mounting<br />
Anti-burglary strike plate 3/PSR-V<br />
for wooden door cases, for front mortising (R8),<br />
adjustable design, incl. chipboard screws<br />
3 pieces 4,5 x 40 and 3 pieces. 4,5 x 40 special, in<br />
combination with MVS 900 a straight latch has to<br />
be mounted!<br />
handed right/left data required<br />
Bolted strike plate 6/PSR<br />
for wooden door cases, for front mortising (R8),<br />
for MVS with tapered bolts «S»<br />
incl. chipboard screws 2 pieces 4,5 x 40 and<br />
2 pieces 4,5 x 40 special.<br />
Bolted strike plate 6/BSR<br />
incl. chipboard screws 4 pieces 4,5 x 40<br />
for MVS with tapered bolts «S»: 4/BR and 4/BEL<br />
Hinge guard 4/BR<br />
for wooden door cases and steel frames<br />
incl. chipboard screws 4 pieces 4,5 x 40<br />
hinge guard for wooden door cases only in combination<br />
with bolted strike plate art. no. 6/PSR or 6/BSR<br />
Hinge guard 4/BEL<br />
for wooden door cases and steel frames<br />
incl. chipboard screws 21 pieces 4,5 x 40<br />
hinge guard for wooden door cases only in combination<br />
with bolted strike plate art. no. 6/PSR or 6/BSR<br />
190 <strong>Grundmann</strong> | WG | Anti-burglary Locks
Technical details<br />
Anti-burglary strike plate model 9/E Model 3/PSR Model 3/PSR-V<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
32.5 50 45 50<br />
~5<br />
R 120<br />
<br />
13<br />
12 93 93<br />
12<br />
R 8<br />
210<br />
<br />
<br />
<br />
<br />
<br />
R 2-3<br />
20<br />
10<br />
Hinge guard model 4/BEL<br />
<br />
<br />
Hinge guard model 6/BSR<br />
Model 4/BR<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Bolted strike plate model 6/PSR<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
<br />
<br />
<strong>Grundmann</strong> | WG | Anti-burglary Locks 191
WG Anti-burglary Locks<br />
Multi-point Lock<br />
MVS 900<br />
The multi point security lock MVS 900 is the<br />
product in our product line that offers the greatest<br />
fascination for those who take particular<br />
pleasure in technology and security. A small<br />
gear meshes with another gear and guarantees<br />
that the lock’s spring bolt retraction can be<br />
easily opened. The only drawback is that this<br />
technical wonder cannot be seen when the lock<br />
is installed, and this is why lay people frequently<br />
forget to lock up. A MVS 900 can really only perform<br />
to the level of its ability and securely anchor<br />
the door in the door frame, in its locked state.<br />
multi-point lock<br />
model MVS 900<br />
prices see page 393<br />
Profile cylinder<br />
When used with the multi-point lock<br />
MVS 900, any commercial profile cylinder<br />
with a cam according to ÖNORMEN 1303<br />
and B 5356 is suitable.<br />
Minimal cam-width = 9 mm<br />
rose for door catch unit 915T<br />
model 684TF in F1-SAT<br />
prices see page 393<br />
Technical details<br />
Multi-point lock MVS 900<br />
Application on anti-burglary doors<br />
Recommended door weight from 100 kg<br />
up to max. 200 kg<br />
suited for ÖNORM EN 12209, category of use 3<br />
security effect grade 4<br />
Security class 4 ÖNORM B 5351<br />
admitted for anti-burglary doors<br />
according to ÖNORM B 5338 WK-3.<br />
<br />
<br />
Fire retardant 30 minutes<br />
checked ÖNORM B 3858<br />
Area of application MVS 900<br />
Security doors for house and apartment entrances.<br />
Suitable for leafs in wood, metal and plastic as well<br />
as arched doors. Because of the special design of<br />
the locking elements it is also suitable for steel frames.<br />
With metal or plastic doors whose frame permit<br />
the installation of a lock case 80 mm deep, the MVS<br />
900 is supplied with an offset sliding rod set in profile.<br />
(Specify «for metal frame doors» when ordering.)<br />
Finishes MVS 900<br />
NL = forend and case Niro-Look, latch and<br />
dead bolt silver-coloured zinc chromate<br />
yellow<br />
Finish E-SAT on request.<br />
Tender text MVS 900 for wooden door frames<br />
Anti-burglary mortise lock with multi-point locking,<br />
suited for anti-burglary doors for house and apartment<br />
entrances according to ÖNORM B 5338. Made<br />
for profile cylinder with cam according to ÖNORM B<br />
5356, with 3/5 x locking with tapered bolts (S), for<br />
wooden frames incl. strikes plates, with/with-out<br />
latch lever, on request available with a door catch,<br />
checked ÖNORM EN 12209, category of use 3,<br />
security class 4, dimensions of the main lock according<br />
to ÖNORM B 5350, finish: Nirolook (NL), other<br />
finishes see model, e.g. MVS 915S/10cm/88/8,5,<br />
left NL<br />
As this lock matches the requirements of security<br />
class 4, it is also suited for the installation on<br />
WK-3 doors.<br />
Tender text MVS 900 for steel door frames<br />
Anti-burglary mortise lock with multi-point locking,<br />
suited for anti-burglary doors for house and apartment<br />
entrances according to ÖNORM B 5338. Made<br />
for profile cylinder with cam according to ÖNORM<br />
B 5356, with 3/5 x locking with conical bolts (K),<br />
for steel frames without strike plates, with/without<br />
latch lever, on request available with a door catch,<br />
checked ÖNORM EN 12209, category of use 3, security<br />
class 4, dimensions of the main lock according to<br />
ÖNORM B 5350, finish: Nirolook (NL), other finihes<br />
see model, e.g. MVS 905K/10cm/88/8,5, left NL.<br />
As this lock matches the requirements of security<br />
class 4, it is also suited for the installation on<br />
WK-3 doors.<br />
192 <strong>Grundmann</strong> | WG | Anti-burglary Locks
Technical details<br />
MVS 900 counterpressure bolt MVS 900 tapered bolts «S» – hardened MVS 900 conical bolts «K» – hardened<br />
→ The toggle joint gear increases the closing force<br />
in the end phase of the locking procedure.<br />
→ The counterpressure lock prevents the locking<br />
elements from being pushed back from the out<br />
side. The lock must be locked 2x.<br />
→ In locked position, the pressure is released on<br />
the toothed gear and there is no load on the<br />
cylinder.<br />
The counterpressure bolt permits problem-free<br />
use of rotary knob cylinders.<br />
→ For wooden door frames.<br />
→ Matching strike plate art.no. 6/PSR.<br />
→ Contact of door leaf on door frame<br />
ca. 6 mm.<br />
→ Adjustable contact pressure by rotating the<br />
locking bolts.<br />
→ For steel door frames without reinforcement.<br />
→ Low deformation values of frame under loading.<br />
→ Cannot be used for strike plates art.no. 6/PSR.<br />
→ In standing-out position all bolts can be easily<br />
exchanged.<br />
Product overview<br />
MVS 903S MVS 903K MVS 905S MVS 905K MVS 913 MVS 915 MVS 915T<br />
for standard steel frames MVS 903K<br />
lock with triple locking and conical bolts «K»<br />
with latch lever, without strike plate<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required<br />
Note: Do not use conical bolts «K» in combination<br />
with strike plates 6/PSR.<br />
for wooden door frames MVS 903S<br />
lock with triple locking and tapered bolts «S»<br />
with latch lever, without strike plate<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required<br />
for standard steel frames MVS 905K<br />
lock with 5x locking and conical bolts «K»<br />
with latch lever, without strike plate<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required<br />
Note: Do not use conical bolts «K» in combination<br />
with strike plates 6/PSR.<br />
for wooden door frames MVS 905S<br />
lock with 5x locking and tapered bolts «S»<br />
with latch lever, without strike plate<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required<br />
for wooden door frames MVS 913<br />
lock with triple locking and tapered bolts «S»<br />
with latch lever<br />
incl. strike plate art.no. 3/PSR and 6/PSR<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required<br />
for wooden door frames MVS 915<br />
lock with 5x locking and tapered bolts «S»<br />
with latch lever<br />
incl. strike plate art.no. 3/PSR and 6/PSR<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required<br />
for wooden door frames MVS 915T<br />
lock with 4x locking, integrated door catch and tapered<br />
bolts «S» and latch lever<br />
incl. strike plate art.no. 3/PSR, 6/PSR and 6/TSR<br />
incl. cylinder fixing screws and<br />
various fixing screws<br />
backset- and handed left/right-data required, together<br />
with door opening direction (inwards/outwards)<br />
The integrated door catch unit permits the door to<br />
be left ajar with a locking hook. Additional screw-on<br />
lock with cylinder is not required.<br />
Forend-extensions for MVS 990 and MVS 995 see<br />
page 393.<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
<strong>Grundmann</strong> | WG | Anti-burglary Locks 193
WG Anti-burglary Locks<br />
Multi-point Lock<br />
MVS 900<br />
Technical details<br />
Multi-point lock MVS 900<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Measure in mm ÖNORM DIN<br />
Backset D 50/60/70 55/65/70<br />
Distance E 88 92<br />
Case width K 80/90/100 85/95/100<br />
Case width K1 75/85/95 80/90/95<br />
Follower square N 8,5 10<br />
Latch bottom edge A <strong>11</strong> 7<br />
Latch middle B 26 22<br />
Deadlock top edge C 50 54<br />
Auxiliary lock F 380 384<br />
Measure in mm ÖNORM DIN<br />
Door catch follower G 332 328<br />
Strike plate 3/PSR H 82 78<br />
Follower middle L 1075 1079<br />
R 425 429<br />
S 350 346<br />
T 171,5 175,5<br />
U 108,5 104,5<br />
Cylinder Z 31 31<br />
Door catch unit (for wooden frames only)<br />
An additional cylinder or additional screw-on lock<br />
is not required. The door catch is operated from<br />
inside with the rotary knob and is unlocked from the<br />
outside via the main lock with the cylinder key (see<br />
drawing on the next page).<br />
Latch stop<br />
MVS 900 are supplied on request with latch stops<br />
without surcharge. Note: latch stops cannot be used<br />
in conjunction with electric door openers.<br />
194 <strong>Grundmann</strong> | WG | Anti-burglary Locks
Technical details<br />
Multi-point lock MVS 900<br />
Rose for door catch unit for MVS 915T: 684TF<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
aluminium: ø 51 mm<br />
stainless steel: ø 50 mm<br />
brass: ø 50 mm<br />
Roses for door catch unit MVS 915T<br />
Roses with rose support, art.no. 684TF with<br />
red-white-display, incl. art.no. 250, 60 mm<br />
length, 7 mm square – Please indicate door<br />
thicknesses!<br />
<br />
Technical details<br />
Multi-point lock MVS 900 for doors with seal in the frame<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finishes rose 684TF<br />
POL = aluminium extra bright<br />
F1-SAT = aluminium silver anodized<br />
satin finish<br />
F2 = aluminium new silver<br />
anodized<br />
P-BE = aluminium powder coated<br />
MS = brass extra bright<br />
MS-N = brass unlacquered extra<br />
bright<br />
MS-Cr = brass chrome plated<br />
MS-Cr-SAT = brass chrome plated satin<br />
finish<br />
E-POL = stainless steel extra bright<br />
E-SAT = stainless steel satin finish<br />
<br />
<br />
Left lock MVS 900/LI<br />
<br />
<br />
Right lock MVS 900/RE<br />
<br />
<br />
<br />
<br />
Multi-point lock MVS 900 for doors with additional mortise seal<br />
<br />
<br />
<br />
<br />
Left lock MVS 900V/LI*<br />
<br />
<br />
<br />
<br />
Right lock MVS 900V/RE*<br />
ANTI-<br />
BURGLARY<br />
FITTINGS<br />
<br />
<br />
* Attention: For doors with seals on the mortise side, the connecting rod must be ordered as the reverse version. Enter «V» in the art.no. (e.g. MVS 903SV/li).<br />
<strong>Grundmann</strong> | WG | Anti-burglary Locks 195
196 <strong>Grundmann</strong> | TAC | Transponder Access Control<br />
On opening and closing. <strong>2010</strong>/<strong>11</strong>
product group<br />
Transponder Access<br />
Control – Innovation<br />
opens new worlds<br />
That makes TAC<br />
so distinctive,<br />
professionell,<br />
convenient,<br />
flexible,<br />
user-friendly,<br />
unique and sure.<br />
198<br />
199<br />
200<br />
202<br />
204<br />
206<br />
TAC<br />
ACCESS<br />
CONTROL
1.<br />
2.<br />
That makes TAC<br />
so distinctive –<br />
3.<br />
the combination of<br />
1. Electronic lock<br />
+ 2. Fitting<br />
+ 3. Rose with read<br />
function.<br />
1. Electronic lock<br />
The electronic intelligence is seated in<br />
a tamper-proof area.<br />
2. Fitting<br />
Large selection in commercial and<br />
residential fittings. Even own designs<br />
can be implemented if required.<br />
3. Rose with read function.<br />
The media are read without contact. The<br />
rose surface can be provided with an<br />
individual graphic design.<br />
Our battery-operated TAC system is activated on<br />
the rose in a power-saving manner. As soon as<br />
the locking medium is held before the display,<br />
the modern, contactless read technology system<br />
verifies the access authorisation.<br />
If the criteria are met, the opening is visually and<br />
acoustically signalled and the user can enter<br />
without any problem. After the door is shut, it<br />
is automatically locked up again in the normal<br />
case. A «permanent open position» is also available.<br />
This is primarily useful for office doors<br />
that have to be freely accessible during certain<br />
hours.<br />
If the door is locked, the lever handle moves<br />
freely, but has no opening function. Complying<br />
with the emergency exit function EN 179, the<br />
doors can be opened from the inside anytime.<br />
198 <strong>Grundmann</strong> | TAC | Transponderschließsystem<br />
Access Control
That makes TAC<br />
so professional –<br />
the seven TAC<br />
skills.<br />
1. TAC means a card instead of many keys.<br />
2. TAC brings solutions – from the car park<br />
access up to writing desk drawers.<br />
3. TAC is checked according to European<br />
standards (fire-retardant according to EN<br />
1634-1, fire resistance time 30 minutes,<br />
TAC 371R series tested according to EN<br />
179 and DIN 18250).<br />
4. With the convenient management software,<br />
the TAC locking system can be very<br />
easily configured.<br />
5. TAC withstands extreme loads and is tested<br />
for compliance with the use class 4 EN<br />
1906 criteria.<br />
6. TAC guarantees high-quality and attractive<br />
design – the elegant rose solution<br />
stands alone for itself and adapts to the<br />
user's corporate design if required.<br />
7. TAC is Made in Austria.<br />
On opening<br />
and closing.<br />
www.grundmann.com<br />
<strong>Grundmann</strong> | | TAC | | Transponderschließsystem<br />
Access Control<br />
199<br />
TAC<br />
SCHLIESS- ACCESS<br />
SYSTEM CONTROL
7.<br />
8.<br />
6.<br />
That makes TAC<br />
so convenient –<br />
a great variety of functional<br />
zones are made<br />
accessible with one<br />
medium.<br />
4.<br />
3.<br />
The medium opens without contact.<br />
The reader recognises the medium without<br />
an additional alarm function and yet<br />
saves energy.<br />
The medium can be immediately<br />
re-issued in case of loss.<br />
A costly replacement of the locking system<br />
- like in a mechanical system - is dispensed<br />
with.<br />
The medium is open for new design.<br />
The chip can be integrated in cards,<br />
keychains, belts or watches.<br />
200<br />
<strong>Grundmann</strong> | TAC | Transponderschließsystem<br />
Access Control
5.<br />
9.<br />
1.<br />
2.<br />
1. Entry and exit roads of the premises<br />
An intelligent barrier control provides safety in<br />
underground garages and outdoor car parks. The<br />
card functions like an identity card.<br />
2. Main entrance<br />
Outside the general opening hours, one can<br />
provide regulated access to the main entrance<br />
after confirming the authorisation. It is locked<br />
automatically and with time control.<br />
3. Time recording terminal<br />
This terminal guarantees a swift and efficient<br />
recording of working hours coupled with individual<br />
employee information for the HR Infocentre.<br />
The read/write function is also integrated here.<br />
4. Storage depots<br />
Cupboards and lockers can be similarly operated<br />
with the same TAC card. No additional key is<br />
required for locking this depot.<br />
5. Interior doors made of wood or glass<br />
TAC also organises the access control of wirefree<br />
interior doors. Electronic offline locks are<br />
integrated here.<br />
Commercial fittings for all<br />
application areas<br />
<strong>Grundmann</strong> <strong>Beschlagtechnik</strong> is a tradition-rich<br />
manufacturer of high-end commercial fittings.<br />
These can be combined with a GEOS ball bearing<br />
or a WG4 metal plain bearing.<br />
We'd also be glad to discuss solutions independent<br />
of fittings, or your individual design ideas.<br />
6. Privacy function<br />
The TAC «privacy» function signals from outside<br />
whether the access is desirable.<br />
This function can be very helpful in hotel rooms<br />
as well as in conference rooms and offices with<br />
customer service.<br />
7. Emergency exit doors<br />
Emergency exit doors can be used from the outside<br />
only with an authorised card. They can however<br />
be opened from the inside anytime without<br />
any authorisation.<br />
8. Side entrance door with a<br />
weather-resistant electronic system<br />
These doors can be used from the outside with<br />
an authorised card. They can be used anytime<br />
like emergency exit doors from the inside. This<br />
solution functions with or without wiring.<br />
9. Lift control system<br />
Access to sensitive floors from the lift can be<br />
gained only with an authorised card.<br />
(= floor control with ti me profile).<br />
<strong>Grundmann</strong> | | TAC | | Transponderschließsystem<br />
Access Control<br />
201<br />
TAC TAC<br />
SCHLIESS- ACCESS SCHLIESS<br />
CONTROLSYSTEM
Stand alone<br />
This is the ideal solution for small or construction-time<br />
facilities. The media can also<br />
be directly identified and/or erased here in<br />
the offline units without computer software.<br />
That makes TAC<br />
so flexible –<br />
modular components<br />
from house doors to<br />
major commercial<br />
objects.<br />
Read only<br />
Based on the offline units, a PC access<br />
control software is additionally required in the<br />
read-only solution. Data can be transferred<br />
between the offline units and the PC by means<br />
of a programming device or a laptop. The time<br />
function, which is a time limit, is already integrated<br />
as a standard.<br />
Read/Write<br />
Combined with online wall readers, time<br />
recording terminals or table readers, the<br />
data can be directly transferred from the<br />
PC to the medium. Important information<br />
like the authorisation period, the locking<br />
of media or the information of the battery<br />
status are thus communicated swiftly and<br />
easily.<br />
Basic: Stand alone<br />
Module 1: Read only<br />
Module 2: Read/Write<br />
Module 3: Hotel<br />
A consistent<br />
technology<br />
platform<br />
Hotel<br />
Combined with a table scanner, the data can<br />
be directly transferred from the PC to the<br />
medium. With an interface to the respective<br />
hotel administration software, the data can<br />
be directly transferred.<br />
Mifare® or Legic®<br />
A uniform identification medium<br />
for all applications.<br />
With the integrated universal technology<br />
platform of Mifare® or Legic®, the<br />
authorisation management of a wide<br />
variety of applications like access control,<br />
time recording, parking, cashless<br />
payment in the canteen or vending<br />
machines, IT access, e-ticketing up to<br />
biometric high-security applications and<br />
other market requirements of the future<br />
can be covered with a single identification<br />
medium.<br />
202 <strong>Grundmann</strong> | TAC | Transponderschließsystem<br />
Access Control
TAC module 1:<br />
Read only<br />
TAC basic:<br />
Stand Alone<br />
+<br />
TAC module 2:<br />
Read/Write<br />
TAC module 3:<br />
Hotel<br />
Programming<br />
card<br />
User cards<br />
Delete Card<br />
Commercial<br />
fitting<br />
with rose<br />
Wall reader<br />
TAC<br />
SCHLIESS- ACCESS<br />
SYSTEM CONTROL<br />
PC-programming<br />
Terminal<br />
Card programming<br />
device<br />
Portable<br />
programming<br />
Time recording<br />
terminal<br />
<strong>Grundmann</strong> | TAC | Transponder Access Control<br />
203
Locking media:<br />
Cards, coins,<br />
bracelets and<br />
and ... and …<br />
That makes TAC so<br />
user-friendly –<br />
its comprehensive<br />
system.<br />
Locking media<br />
Mostly the chip is welded in a card. It can also be<br />
integrated in any plastic keychain. Coins are preferred<br />
in the wellness sector, which are clipped on<br />
the bracelet. And renowned watchmakers additionally<br />
offer a large selection of watches with integrated<br />
transponder chip.<br />
In a cabinet and cubicle lock for locking file<br />
cabinets or changing rooms, no additional key<br />
is required. The user can open doors as well as<br />
cabinets with one medium. And here too practical<br />
additional functions like an access restriction or the<br />
recording of the last opening operation can be used.<br />
Individual design solutions<br />
TAC offers you individual solutions to integrate modern<br />
technology into the building design either very<br />
subtly or in a modern and self-assured manner. Like<br />
in a modular system, TAC can be used as a rose solution<br />
combined with protection plates or integrated in<br />
an all-glass solution.<br />
1. Locking media<br />
2. Cabinet and cubicle locks<br />
3. Individual design solutions<br />
4. All-glass door lock<br />
5. MyDesign programme<br />
6. Time recording terminal<br />
7. Wall reader<br />
8. TAC privacy function<br />
With the MyDesign programme from <strong>Grundmann</strong>,<br />
even completely unique handle shapes, e.g.<br />
the fitting of a golf hotel illustrated here, can be<br />
implemented.<br />
This option can also be interesting for the restoration<br />
of a listed heritage building: revitalise in proper<br />
style and nonetheless not dispense with a contemporary<br />
locking system.<br />
Individual<br />
solutions:<br />
Fitting for a<br />
golf hotel<br />
Glass door lock, TAC 362<br />
series, with a stainless steel<br />
screw-on lock<br />
TAC rose with read function<br />
integrated in<br />
a door protection plate<br />
204 <strong>Grundmann</strong> | TAC | Transponderschließsystem<br />
Access Control
Time recording terminal<br />
The time recording for payroll accounting can also<br />
be conducted with the access medium. The time<br />
recording terminal with connection to the access<br />
control also provides a reader with read/write function<br />
and can thus be integrated in full in the access<br />
control software. It can be used both for loading of<br />
information (e.g. validity period) and for reading the<br />
data (e.g. battery status of the battery unit) of the<br />
medium.<br />
The wall reader<br />
For all electrically operated doors<br />
(offline > virtual network > online)<br />
A fitting is not always intended for opening and<br />
closing. Ideally the locking medium should be used<br />
throughout a building as far as possible. For such<br />
cases, the TAC system offers an ideal supplement: a<br />
wall reader.<br />
In the outdoor area, the reader is located in a flushmounted<br />
socket. The evaluation electronics itself is<br />
housed in the protected inner side.<br />
The wall reader is wired to the lock in the door.<br />
Individual solutions:<br />
A TAC lock integrated in<br />
a screw-on lock<br />
available on site<br />
The TAC privacy function<br />
– your guests will love it.<br />
The application areas are diverse, for<br />
example:<br />
– Motor locks<br />
– Electrically operated doors with e-opener<br />
– Automatic sliding or revolving doors<br />
– Cabinet systems<br />
– Rolling shutter gates<br />
– Lifts<br />
open<br />
close<br />
Discretion sets the tone<br />
The TAC «privacy» function replaces the wellknown<br />
«Do not disturb» card and has been specially<br />
developed for the hotel sector.<br />
There is a button on the inside of the guest room,<br />
which the guest can set on red, so that the hotel<br />
employees do not unintentionally disturb them.<br />
If, for instance, the chambermaid wants to access<br />
the door with her card, her access is denied. The<br />
employee can gain access in emergency only with<br />
the higher-ranking «first aid card».<br />
<strong>Grundmann</strong> | | TAC | | Transponderschließsystem<br />
Access Control<br />
205<br />
TAC<br />
SCHLIESS- ACCESS<br />
SYSTEM CONTROL
That makes TAC so<br />
unique – various handle<br />
shapes as well as<br />
roses and media in your<br />
corporate design ...<br />
Some examples here:<br />
Models 1654, 2154, 2254,<br />
2354, 2554N, 4654.<br />
Good in shape and finish<br />
Basically all <strong>Grundmann</strong> fittings can be<br />
combined with the TAC transponder<br />
locking system. Select from a wide variety<br />
of shapes – from classical round tube<br />
handle up to designer models.<br />
<strong>Grundmann</strong>'s commercial fittings<br />
correspond to the use class 4 ÖNORM<br />
1906. They are available optionally with a<br />
GEOS ball bearing or a WG4 metal slide<br />
bearing.<br />
Most of the handle shapes are also<br />
suitable for emergency exit doors<br />
according to EN 179.<br />
Roses with company logos or<br />
individual ideas ...<br />
206<br />
<strong>Grundmann</strong> | TAC | Transponderschließsystem<br />
Access Control
Emergency exit doors according to EN 179 and<br />
panic exit doors according to EN <strong>11</strong>25 can be<br />
integrated in the TAC system with or without electronic<br />
connection. In doing so, it doesn't matter<br />
whether they have single or double leaf.<br />
That makes TAC<br />
so sure –<br />
For full leaf doors<br />
Motor lock ELK serie<br />
Total solutions for<br />
emergency exits and<br />
panic exit doors<br />
In addition TAC electronic locks with motor or<br />
handle control can also be integrated in the existing<br />
access control system according to customer<br />
requirement and/or individual security needs.<br />
Likewise, different backsets and functions are<br />
specified according to application area.<br />
The control of the lock can be for instance undertaken<br />
by means of<br />
– Card reader<br />
– Key switch<br />
– Numerical code keypad or<br />
– Time switch<br />
System integration<br />
TAC locking functions are integrated in<br />
access control systems or combined with<br />
– Intercoms<br />
– Time switches<br />
– Finger scans<br />
– Alarm systems<br />
– Accounting functions<br />
– Numerical codes<br />
– Building management functions<br />
The mechanical locking function of the<br />
locks is also guaranteed in case of power<br />
failure.<br />
For tubular frame doors<br />
Motor lock<br />
RESM and/or RZSM series<br />
<strong>Grundmann</strong> | | TAC | | Transponderschließsystem<br />
Access Control<br />
207<br />
TAC<br />
SCHLIESS- ACCESS<br />
SYSTEM CONTROL