“Do ?” also have - Hama

SAT-Technik
… | PLUGS & MOUNTING | SOCKETS | COMPONENT PARTS | MULTI-SWITCHES | LNBS | DISHES | BRACKETS | INSTALLATION AIDS |
Aluminium Wall Bracket
- Extremely stable in well-tried L shape
- Corrosion resistant
- Height: 25 cm
- Pipe diameter: 50 mm
- Material: aluminium
Wall distance: 35 cm; colour: aluminium
044199
Qty
10
CB
- Extension tube for masts (up to 50 mm
in Ø), e.g. for satellite dishes up to 80 cm
- vertical and horizontal mounting by
2 galvanized fastening bows and claws
each
- Can also be used as extension arms for
masts- keep wind load calculation in
mind
Universal Roof Rafter Mast Holder
- For fixing onto rafters ( no need to
dismantle the roof panelling)
- Universal problem solver when the mast
can not be lead through the attic
- Various mounting possibilities for centric
leadthrough of the mast in the case
of form bricks (e.g. Frankfurter Pfanne)
- Made of hot galvanized steel thus
long-life and corrosion resistant
- Suited for antennas up to 100 cm
- Height: 110 cm
- Pipe diameter: 48mm
- Rafter distance: 55-90 cm ( infinitely
adjustable)
- Pitch of roof: 0-60° (infinitely
adjustable)
- Fastening screw included
SAT-TECHNIK BRACKETS
044206
Qty
1
CB
i
Wall brackets allow the dishes to be mounted
protected from wind and weather. Outside,
wall brackets need to be well protected
against corrosion. Galvanized wall brackets
withstand all kinds of weather over a long
period of time. Hot galvanized wall brackets
last even longer and are even more abrasion
resistant. Aluminium wall brackets are even
better! Important: When mounting SAT
dishes using wall brackets DIN EN 50083-1
(earthing standard) must be followed.
(please take a look at the illustration.)
BC = blister size
BC X = blister (special size)
HT = hangtag
CB = packed in cardboard box
PO = polybag
BA = banderol
September 2007
141