“Do ?” also have - Hama

SAT-Technik
… | PLUGS & MOUNTING | SOCKETS | COMPONENT PARTS | MULTI-SWITCHES | LNBS | DISHES | BRACKETS | INSTALLATION AIDS |
Installation Aids
Every trained DIYer can assembly a
satellite system without much fuss.
DIY assembly will be a success with
appropriate installation accessories for
adjusting and controlling. This also
applies to laying of cables and to the
assembly of plugs. In case of
disturbances, a quick fault diagnosis (by
means of exclusion procedure) will be
a success as well .
047454
047458
Qty
6
Qty
6
BC
42
BC
42
SAT Levelmeter
- For precise adjustment and testing of
SAT installations
- Controller for sensitivity included
- 2x F-connectors (sockets)
- Analogue display
- Control sound for SAT level
- Colour: black
Compass
- Robust compass with plastic housing for
satellite position fixing
- International 64/360° scale, white on
black
- Rotatable marking
- Sighting device with finder
- Display diameter 45mm
- Noctilucent display
- Collapsible
- Colour: black
SAT-TECHNIK INSTALLATION AIDS
Cable Stripper
- for skinning all common antenna cables
with an outer diameter up to 8 mm and
an inner conductor up to a max.
diameter of 1.13 mm
- can be used for outer and inner casings
- easy handling
- colour: white/blue
047449
Qty
6
BC
42
Screw Kit with Pegs
Set contains:
- 4 screws Ø 8 x 80 mm (DIN 571)
- 4 washers Ø 8 mm (DIN 9021)
- 4 plastic pegs Ø 12 mm for solid
material (concrete, solid brick)
044189
Qty
6
BC
42
25 Piece Cable Binder Set
- 15 pieces, 2.4 x 90 mm
- 10 pieces 4.8 x 188 mm
- colour: clear
044252
Qty
6
BC
34
BC = blister size
BC X = blister (special size)
HT = hangtag
CB = packed in cardboard box
PO = polybag
BA = banderol
September 2007
145