Base SAS 9.1.3 Procedures Guide - Acsu Buffalo

HISTOGRAM Statement
219
tion is repeated for the remaining estimates. If you do not specify a value for c, the
bandwidth that minimizes the approximate MISE is used for all the estimates.
CAXIS=color
CAXES=color
CA=color
specifies the color for the axes and tick marks. This option overrides any COLOR=
specifications in an AXIS statement. The default value is the first color in the device
color list.
CBARLINE=color
specifies the color for the outline of the histogram bars. This option overrides the C=
option in the SYMBOL1 statement. The default value is the first color in the device
color list.
CFILL=color
specifies the color to fill the bars of the histogram (or the area under a fitted density
curve if you also specify the FILL option). See the entries for the FILL and PFILL=
options for additional details. Refer to SAS/GRAPH Software: Reference for a list of
colors. By default, bars and curve areas are not filled.
CFRAME=color
specifies the color for the area that is enclosed by the axes and frame. The area is not
filled by default.
CFRAMESIDE=color
specifies the color to fill the frame area for the row labels that display along the left
side of the comparative histogram. This color also fills the frame area for the label
of the corresponding class variable (if you associate a label with the variable). By
default, these areas are not filled. This option is not available unless you use the
CLASS statement.
CFRAMETOP=color
specifies the color to fill the frame area for the column labels that display across the
top of the comparative histogram. This color also fills the frame area for the label
of the corresponding class variable (if you associate a label with the variable). By
default, these areas are not filled. This option is not available unless you use the
CLASS statement.
CGRID=color
specifies the color for grid lines when a grid displays on the histogram. The default
color is the first color in the device color list. This option also produces a grid.
CHREF=color
CH=color
specifies the color for horizontal axis reference lines requested by the HREF= option.
The default is the first color in the device color list.
COLOR=color
specifies the color of the density curve. Enclose the COLOR= option in parentheses
after the distribution option or the KERNEL option. If you use the COLOR= option
with the KERNEL option, you can specify a list of up to five colors in parentheses