V-METAL USER MANUAL - Prominy

More documents

Recommendations

Info

SPM’s features Global Controller Most of the features of SPM can be controlled through Global Controller or MIDI CC (MIDI Control Change). We recommend you to use Global Controller or MIDI CCs to change the common parameters of SPM Multi unless you would like to customize a specific instrument. You can set the common parameters of all the instruments in the multi at once by using Global controller or MIDI CCs. (You can customize each instrument with its interface, but you’ll need to repeat the same process with all the instruments in the multi.) Global Controller can be shown / hidden by clicking the multi script icon. Octave shift (transpose) With this number box, you can transpose up to +/- three octaves instead of using your keyboard controller's transpose feature. It is also useful for a keyboard that does not have the feature. MIDI controllers (To show this page, click the ‘options…’ menu and select the ‘MIDI CC#’) You can configure MIDI CC numbers to control various features. *We recommend you not to change the MIDI CC numbers unless you have any specific reasons. For details about other parameters, please refer to the following sections. 32
Fretboard Monitor The SPM automatically selects a proper string / fret position depending on the situation. You can also change the string manually by key switches and MIDI CC# 53. The Fretboard Monitor visualizes the current stroke direction / fret position / playing technique / you are playing. [Note] You can click the pull-down menu and see the settings (key switch, mute mode, play keys, etc.), but we recommend you to configure the settings using Global Controller or MIDI Control Changes instead of using the interface because the settings of the Fretboard Monitor and that of the Main Instruments need to be the same. You can configure all the Main Instruments and the Fretboard Monitor at once by using Global Controller or the MIDI Control Changes. 33
Page 1 and 2: ULTRA DARK-POWERED VIRTUAL GUITAR U
Page 3 and 4: Key switch [F-2]: FX2 - whammy bar
Page 5 and 6: License All samples / files are the
Page 7 and 8: 2. Fretboard Monitor The SPM automa
Page 9 and 10: System Requirements Mac Mac OS X 10
Page 11 and 12: ___________________________________
Page 13 and 14: Multi: V_METAL located in; /Multis/
Page 15 and 16: SPM Instruments E0: power chord Rea
Page 17 and 18: Gliss down (using Hold Key) � �
Page 19 and 20: Play Key -1 0 1 2 stop key 3 stop k
Page 21 and 22: Key switch [C0]: octave Real time l
Page 23 and 24: Key switch [C#-1]: single note Real
Page 25 and 26: chord 5: 5 � chord 6: 7 � chord
Page 27 and 28: Key switch [G-2]: natural harmonics
Page 29 and 30: ___________________________________
Page 31: Customizing SPM 31
Page 35 and 36: ___________________________________
Page 37 and 38: High Velocity Threshold With this n
Page 39 and 40: Feedback You can turn on / off the
Page 41 and 42: Configure Play Keys though MIDI CC
Page 43 and 44: Mute mode (mod wheel / velocity swi
Page 45 and 46: How to set Instrument select key sw
Page 47 and 48: ___________________________________
Page 49 and 50: ___________________________________
Page 51 and 52: Mapping & key range 51
Page 53 and 54: minor 3rd- dyad chord 0 major 3rd-d
Page 55 and 56: flat 5th-dyad chord 5th-dyad chord
Page 57 and 58: add9 power chord 0 0 1 string 6 roo
Page 59 and 60: unison bend double bend 0 0 1 1 2 3
Page 61 and 62: narutal harmonics FX -2 0 FX1 FX2 F
Page 63 and 64: V-METAL MIDI controllers MIDI CC# 1
Page 65 and 66: MIDI CC# 55 MIDI CC# 56 MIDI CC# 57
Page 67: V-METAL User’s Manual Written by

V-METAL USER MANUAL - Prominy

Create successful ePaper yourself

Delete template?

Save as template?