Modular Automation Devices - Hager
Modular Automation Devices - Hager
Modular Automation Devices - Hager
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Dimmer system: 1/10V pilots<br />
EV 106 and EV 108 pilot<br />
dimmers<br />
• To control several dimmers or<br />
electronic ballasts via the 1/10V<br />
output<br />
• Display to show the dim level<br />
and for parameter setting<br />
• Wiring of illuminated<br />
pushbuttons possible up to<br />
5mA<br />
• Min/max level setting<br />
• Contact output for state<br />
information<br />
• Dimming rise time setting<br />
• Setting of rise time and fall<br />
time<br />
EV 108 pilot dimmer<br />
• Scene inputs used for override<br />
(3 levels) or simple recall<br />
(2 levels).<br />
Use :<br />
to control lighting in meeting and<br />
conference rooms, or in restaurants<br />
Dimmers conform to standards :<br />
EN 50081-1, EN 50082-1,<br />
CEI 669-1, CEI 669-2-1.<br />
For technical details<br />
see page 413<br />
Designation<br />
Characteristics<br />
Width in ❚<br />
17.5 mm<br />
Pack<br />
qty<br />
Ref<br />
<strong>Modular</strong><br />
devices<br />
1/10V pilot dimmer<br />
230 V / 50 Hz<br />
4 1<br />
EV106<br />
EV106<br />
• To control<br />
EV 100 and EV 102 (max. 30)<br />
• To dim electronic ballasts<br />
• Wiring of illuminated<br />
pushbuttons possible up to<br />
5mA<br />
• Display to show the dim level<br />
and to set the parameters:<br />
- dimming rise time (4 s ..99s)<br />
- min dim level (0..49%)<br />
- max. dim level (51..99%)<br />
Contact output to display the<br />
dim state (load is OFF, contact is<br />
opened, if load is dimmed the<br />
contact is closed). It is used to<br />
switch ON/OFF the electronic<br />
ballast<br />
1/10V - interface<br />
Output /max 50mA<br />
contact output :<br />
1 NO, 250 V µ10 A<br />
1/10V pilot dimmer with scene<br />
input<br />
4 1<br />
EV108<br />
EV108<br />
In addition to EV106 features :<br />
• Scene inputs used for override<br />
(3 levels) or simple recall (2)<br />
• For each scene<br />
- dimming rise time<br />
- scene level<br />
- and scene mode<br />
(recall or- override)<br />
373