Installation and Maintenance Manual - Harken
Installation and Maintenance Manual - Harken
Installation and Maintenance Manual - Harken
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7. Slide out the pawls carrier n°20<br />
8. Lift off the gear n°9<br />
9. Remove the second planetary assy n°24 <strong>and</strong><br />
remove flange n°11.<br />
Pay attention to the o-ring in the ring gear.<br />
10. Slide out the first planetary assy n°23<br />
If it is necessary to replace any jaws of the winch, proceed as follows:<br />
I. Unscrew the 4 screws n°14<br />
( 4Nm/35 in-lb)<br />
II. Remove the jaws n°28<br />
UniPower Radial<br />
10<br />
<strong>Installation</strong> <strong>and</strong> <strong>Maintenance</strong> <strong>Manual</strong>
Change language