Tool Set

More documents

Recommendations

Info

special worldwide | 2009 Pneumatic Tools Die Grinder SX For grinding, polishing, burnishing and deburring High ease of use Ergonomic design Speed regulation with setting wheel Air consumption: 113 l/min Air inlet thread: 1 ⁄4” Working pressure: 6.3 bar Collet chuck 6 mm 1 9032-5 Angled design 1/min Power W 9032-1 Straight design Sound Length pressure level mm Weight g EAN-No. 4000896+ 9032-1 2,000 – 25,000 164 Lp A 91 dB(A) 158 380 117055 9032-5 2,000 – 22,000 160 Lp A 90 dB(A) 160 560 117062 Orbital Sander AX With dust collector Suction hose (1.8 m) and dust collector included Continuous speed regulation Low height and light composite housing facilitate easy and controlled working Grinding disc with 6 bore holes, ? 150 mm, with hook and loop fastener Stroke: 5 mm Anti-slip handle Air consumption: 113 l/min, working pressure: 6.3 bar Noise pressure level: 72 dB(A) Max. 10,000 1/min, Weight: 850 g 9033-01 9033-1 EAN-No. 4000896132348 6 m PVC suction hose Spare Parts and Accessories for 9033-1 Designation EAN-No. 1 4000896+ 9033-01 6 m PVC suction hose 145614 9033-010 Grinding disc, 6 holes ? 150 mm 139378 with 5 ⁄16” threaded mount 9033-011 Grinding disc, 9 holes (15 holes per hole) 144280 ? 150 mm with 5 ⁄16” threaded mount 9033-180/10 Abrasive pads, grain size 80 (10 pieces) 139330 9033-1100/10 Abrasive pads, grain size 100 (10 pieces) 139347 9033-1120/10 Abrasive pads, grain size 120 (10 pieces) 139354 9033-1150/10 Abrasive pads, grain size 150 (10 pieces) 139361 Belt Sander SX For narrow surfaces (belt width 10 mm) Three abrasive belts included 330 x 10 mm (grain size 80, 100, 120) 360° head rotation Continuous speed regulation Locking device for quick belt changing Belt speed: 1,188 m / min Automatic belt adjustment Air consumption: 240 l/min Working pressure: 6.3 bar Sound pressure level: Lp A 73 dB(A) Max. 18,000 1/min, Weight: 800 g 9033-4 EAN-No. 4000896131815 Accessories for 9033-4 Designation EAN-No. 1 4000896+ 9033-480/10 Abrasive belts, grain size 80 (10 pieces) 139101 9033-4100/10 Abrasive belts, grain size 100 (10 pieces) 139118 9033-4120/10 Abrasive belts, grain size 120 (10 pieces) 139125 Angle Grinder AX For working areas with restricted access, suitable for cutting metal sheet and steel / Cut-off wheel 100 x 0.8 x 9.53 ( 3 ⁄8”) mm For cut-off wheels up to 100 x 1.0 x 10 mm Air consumption: 113 l/min Reduced vibrations, Working pressure: 6.2 bar Sound pressure level: Lp A 102.3 dB(A) Quick adjustment (without tools) of protection cover with pressure key Max. 16,000 1/min Length: 400 mm, Weight: 1,800 g 9033-8 EAN-No. 4000896143771 Angle Grinder SX For grinding discs 125 x 22 mm Lateral handle, to be used on left or right side Quick adjustment (without tools) of protection cover For grinding discs up to a thickness of 0.8 – 6 mm Spindle locking Noise pressure level: Lp A 89 dB(A) Working pressure: 6.3 bar Air consumption: 113 l/min Air inlet thread 1/4“ Spindle thread M14 x 2 Max. 10,000 1/min, Weight: 1,900 g Mini Oiler SX For oiling pneumatic tools automatically Compact design – to be fixed directly to the tool Air inlet thread 1 ⁄4” Extension of the service life of your pneumatic tools Refillable, Filling capacity 28 ml Weight: 99 g Accessories for 9033-8 9033-7 EAN-No. 4000896132386 9070-1 EAN-No. 4000896129188 9033-08/5 According to CEN standard 12413 and OSA directives Designation EAN-No. 1 4000896+ 9033-08/5 5 Cut-off wheels 100 x 0.8 x 9.53 ( 3 ⁄8”) mm For cutting thin-walled metal sheet and steel 144310 – All pneumatic tools equipped with coupler plug, nominal size 7.2 / Refer also to HAZET Illustrated List 2009 from page 234 on – 32 www.hazet.com
Pneumatic Tools Ingenious Tools Air Drill SX Especially appropriate for car body works and industry Quick-change chuck, capacity 1–10 mm Forward and reverse Air consumption: 113 l/min Air inlet thread: 1 ⁄4” Working pressure: 6.3 bar Sound pressure level: Lp A 91 dB(A) Cold insulated handle Exhaust air is guided through the handle downwards Robust housing Suitable for continuous operation 9030-1 EAN-No. 4000896109470 Max. 2,600 1/min Length: 170 mm, Weight: 1,350 g Angle Drill SX For working in areas with difficult access Quick change chuck, capacity 1–10 mm Forward and reverse Exhaust air is guided through the handle backwards Air consumption: 113 l/min Working pressure: 6.3 bar Sound pressure level: Lp A 95 dB(A) Max. 1,200 1/min Length: 240 mm Weight: 1,100 g 9030-5 EAN-No. 4000896132379 Sabre Saw SX For one-hand operation 3 saw blades included (total length: 70 mm) Adjustable support frame, suitable for double-walled sheet steel Suitable for cutting small radii Cutting capacity: sheet steel 2.9 mm / aluminium 3.2 mm Free speed: 9,500 strokes/min Air consumption: 170 l/min Working pressure: 6.3 bar Sound pressure level: Lp A 90 dB(A) Length: 215 mm Weight: 600 g Joint protects the air hose from kinking 9034-1 EAN-No. 4000896132362 Accessories for 9034-1 Designation EAN-No. 1 4000896+ 9034-018/5 Set with 5 Sabre Saw Blades, 18 teeth 139392 9034-024/5 Set with 5 Sabre Saw Blades, 24 teeth 139408 9034-032/5 Set with 5 Sabre Saw Blades, 32 teeth 139415 Needle Scaler SX Pistol shape 19 pcs. needles ? 3 mm for efficient rust removing 3,200 impacts/min Adjustable needle cover enables maximum utilisation of needles Two-piece housing design for easy maintenance Cold-insulated handle Air consumption: 170 l/min Working pressure: 6.3 bar Sound pressure level: Lp A 97 dB(A) Length: 330 mm Weight: 2,600 g Dimensions: 330 x 45 x 205 mm 9035-5 EAN-No. 4000896132355 Spare part for 9035-5 Designation EAN-No. 1 4000896+ 9035-050 19 Spare needles, ? 3 mm 139385 Air Shear SX With heavy-duty cutting blade maximum cutting capacity: steel 1.2 mm / aluminium 1.6 mm Also suitable for outline cuts Speed regulation with pressure switch Twin bearing spindle reducing vibrations Cold insulated housing Air consumption: 113 l/min Working pressure: 6.3 bar Sound pressure level: Lp A 82 dB(A) Cutting width: 4.5 mm Length: 220 mm Weight: 1,100 g Air Nibbler SX Ideal for cutting small radii (min. 7 mm) Cutting capacity: steel 1.2 mm / aluminium 1.6 mm Also suitable for cutting plastic Continuous speed regulation Twin bearing spindle reducing vibrations Cold-insulated handle Air consumption: 85 l/min Working pressure: 6.3 bar Sound pressure level: Lp A 82 dB(A) Cutting width: 4.5 mm Max. 2,600 1/min Length: 190 mm Weight: 1,200 g 9036-5 EAN-No. 4000896132331 9036-1 EAN-No. 4000896131822 Spare parts set for 9036-5 Designation EAN-No. 1 4000896+ 9036-05/9 Spare parts set (upper and lower cutter incl. spacer plate and screw) 142569 Spare parts set for 9036-1 Designation EAN-No. 1 4000896+ 9036-01/4 Spare parts set (punch, template, nut and screw incl.) 142552 – All pneumatic tools equipped with coupler plug, nominal size 7.2 / Refer also to HAZET Illustrated List 2009 from page 234 on – The HAZET Online Catalogue – a service for 10 years! www.hazet.com 33
Page 2 and 3: special worldwide | 2009 Tool Troll
Page 4 and 5: special worldwide | 2009 Tool Troll
Page 6 and 7: special worldwide | 2009 General Wo
Page 14 and 15: special worldwide | 2009 Tool Boxes
Page 16 and 17: special worldwide | 2009 Hose Clamp
Page 18 and 19: special worldwide Jewels for Profes
Page 20 and 21: special worldwide | 2009 Pullers /
Page 22 and 23: special worldwide | 2009 Thread Rep
Page 24 and 25: special worldwide | 2009 LED Light
Page 26 and 27: special worldwide | 2009 Torque Too
Page 28 and 29: special worldwide | 2009 Endoscopes
Page 30 and 31: special worldwide | 2009 Pneumatic
Page 38 and 39: special worldwide | 2009 Engine Tim
Page 40 and 41: special worldwide | 2009 Engine Tim
Page 42 and 43: special worldwide | 2009 Engine Inj
Page 44 and 45: special worldwide | 2009 Oil Servic
Page 46 and 47: special worldwide | 2009 Brakes Bra
Page 48 and 49: special worldwide | 2009 Chassis /
Page 50 and 51: special worldwide | 2009 Chassis Im
Page 52 and 53: special worldwide | 2009 Chassis /
Page 54 and 55: special worldwide | 2009 Ratcheting
Page 56 and 57: special worldwide | 2009 Commercial
Page 64: special worldwide | 2009 General Wo

Tool Set

Create successful ePaper yourself

Delete template?

Save as template?