om, husqvarna, mz6128, 966613103, 2012-09, zero turn: consumer
om, husqvarna, mz6128, 966613103, 2012-09, zero turn: consumer
om, husqvarna, mz6128, 966613103, 2012-09, zero turn: consumer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LUBRICATION<br />
Lubrication Schedule<br />
8058-056<br />
12/12 Every year<br />
1/52 Every Week<br />
1/365 Every day<br />
Lubricate with grease gun<br />
Oil change<br />
Level check<br />
Filter change<br />
*<br />
Change hydraulic drive filters.<br />
p See Engine Manufacturer's manual<br />
General<br />
Remove the ignition key to prevent unintentional<br />
movements during lubrication.<br />
When lubricating with an oil can, it must be filled with<br />
engine oil.<br />
When lubricating with grease, unless otherwise stated,<br />
use high grade molybdenum disulphide grease.<br />
For daily use, the machine should be lubricated twice<br />
weekly.<br />
Wipe away excess grease after lubrication.<br />
It is important to avoid getting lubricant on the belts<br />
or the drive surfaces on the belt pulleys. Should this<br />
happen, attempt to clean them with spirits. If the belt<br />
continues to slip after cleaning, it must be replaced.<br />
Gasoline or other petroleum products must not be<br />
used to clean belts.<br />
45