Bluetooth Commands - wless.ru

Chapter 2 – AT Commands
Set and Read Device Name
SN Set SocketWireless Name
Sets the SocketWireless friendly name (15 alphanumeric characters MAX).
When another Bluetooth device performs a Discovery, this will be the name that is passed to that
device. Please take note, unlike the name, the SocketWireless Bluetooth address is fixed (48 bit) at
the factory and is unique to every Bluetooth device manufactured.
Format: ATSN,
Parameters: Name: 16 alphanumeric characters MAX
Factory Default: SocketWireless
EXAMPLE:
TYPE: ATSN,MYRADIOS_0123456
REPLY: OK
OR
ERROR
Read Using: ATSI,2
RRN Read Remote Radio Name by Bluetooth Address
Gets a remote radio’s friendly name using its Bluetooth address.
Format: ATRRN,
Parameters: BT Address: Bluetooth Address, 12 hex characters MAX
Return Parameters:
EXAMPLE:
TYPE: ATRRN,0123456789012
REPLY: OK
SocketWireless
OR
NO ANSWER
Note: The timeout for this command is controlled by the master connect timeout in ATSW28.
Set and Read Service Name for Local & Remote Devices
SSN Set Service Name
Set the Bluetooth Service Name. Maximum of channel 0 on the local device.
Format: ATSSN,
Parameters: Service Name: 16 alphanumeric characters MAX
Factory Default: "COM0"
Example:
Type:
Reply:
ATSSN,COM0
OK
OR
ERROR
Read Using: ATSI,4 or ATRSN
Note: Requires a reset for change to take effect.
Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360G) 22