ARC-10 - Bsw

STUDIOFOAM2
order/info: 1·800·426·8434 • www.bswusa.com
PYRAMID2
Auralex Studiofoam Sound Treatment
The workhorse of the industry, Auralex’s 2" Studiofoam wedge-designed sound
treatment kills standing waves and flutter echoes in small/medium areas such as
vocal booths, control rooms and sound studios, and are precision machine-cut for
a clean look. Pyramid2 are cross-cut, yield a less dry-sounding space with more “air”
and offer increased versatility in installation. Dimensions for both: 2" x 2' x 4', box of
12; standard charcoal gray or many other colors available.
Using a new formulation for foam development, this updated product line is better
for the environment, while maintaining the quality of sound control you trust from
Auralex. Update your studios today for better sound reduction. Call BSW today with
your needs.
Wedgies are 1 ft. squares of 2" Studiofoam. With slightly more wedges than regular
Studiofoam, Wedgies have more surface area for greater exposure to sound waves
and are a great solution for problem areas or spot applications. 1' x 1' x 2", box of 24,
charcoal gray only.
TEMP•Tabs StudioFoam mounting kit (TTAB-KIT) is a temporary mounting solution
designed for easy installation and maximum flexibility. Includes 72 mounting tabs
and adhesive.
*STUDIOFOAM2 2" foam, gray $359.00
*STUDIOFOAM2BLUE 2" foam, blue $359.00
*STUDIOFOAM2RED 2" foam, red $359.00
*STUDIOFOAM2BURG 2" foam, burgundy $359.00
*PYRAMID2 2" foam, gray $399.00
*PYRAMID2PUR 2" foam, purple $399.00
*PYRAMID2BLUE 2" foam, blue $399.00
*PYRAMID2BURG 2" foam, burgundy $399.00
*WEDGIES 1' square 2" foam, gray $99.00
Accessories:
*TTAB-KIT StudioFoam mounting kit $49.95
Primacoustic Broadway London Series
Acoustic Room Kits
These easy-to-use acoustic room
kits contain everything you need
to address room problems such as
primary reflections, flutter echo,
standing waves and excessive bass.
Each kit includes a selection of
acoustic panels, the corresponding
mounting hardware and instructions
for easy installation.
BIODEGRADABLE
Broadway London panels are made
from high-density 6 lb. per-cubitfoot
fiberglass panels for upwards
to five (5) times greater absorption than offered by typical low cost 1.3 lb. foam
alternatives. This means that you get more absorption with fewer panels on the
wall while assuring a more even absorption curve throughout the frequency
range. Broadway London panels are completely encapsulated with micromesh
on both front and rear surfaces and the sides are resin hardened to create sharp
looking architectural lines. The panels are then covered in a durable fabric and
offered in choice of three esthetically neutral colors that will easily adapt to the
most demanding interior designer needs. For those that have extra artistic flare,
the panels may be covered with any breathable fabric without compromising the
acoustical performance.
Broadway London panels have been tested to meet stringent Class-1 fire safety
requirements making them suitable for use in public places. Panel mounting is
of paramount importance, especially when you decide to relocate the panels to
another room or change your workspace. Primacoustic Broadway London kits
come complete with easy-to-mount impalers that screw onto the wall surface on
which the panels hang.
These kits are designed for a 120 square-foot room, and are available with beige,
black or gray panels.
LONDON12-BEIGE $699.99
LONDON12-BLACK $699.99
LONDON12-GREY $699.99
226
SOUND TREATMENT (* Sound Proofing Products are Not Returnable.)
Auralex Project
Room Package
The easy and affordable way
to buy acoustic treatment.
The Roominators Project 2
kit is designed primarily for
rectangular or square rooms
less than 100 ft2. The
shortest dimension should
be 8-12 ft. Includes:
(24) Studiofoam 2'x2'x2"
Wedge Panels; (8) LENRD
Bass Traps; and (5) Tubetak Pro Adhesives. Charcoal color. Components sold
separately. Order each item number and quantity below for a complete package.
*2SF22CH 12 wedge panels List $199.00 (order 2)
*LENRD 8 bass traps List $299.00 (order 1)
*TUBETAKPRO Adhesive caulk List $8.99 (order 5)
Call BSW For Lowest Price: 800-426-8434
Auralex MoPAD
Monitor Isolation Pads
Instantly improve the accuracy of your entire monitoring
system with Auralex’s MoPADs. MoPADs provide sonic
isolation between your monitors and what they’re resting
on, effectively decoupling them from your room and resulting
in truer monitoring. Dimensions are 12" x 4" with 100 lb.
capacity. Two pads per speaker. Priced as a set for a speaker pair.
MOPAD $39.95
Acoustics First Cutting Wedge
Sound Treatment
Cutting Wedge can be installed to create absolutely
seamless absorptive walls, and enhance imaging
by reducing unwanted reflections. It is made of 2 lb.
density, high-quality acoustic foam that eliminates
many of the inconsistencies of other types of foam.
The futuristic design allows for increased absorption
because sound waves travel through multiple
surfaces. By adding 2 or 3 nested layers you can
control energy hotspots in corners or in the path of
first reflections quickly and efficiently. Cutting Wedge is great for creating virtual
bass-traps in corners, simply by using 3 or 4 nested layers. It comes in a standard
2.25" stackable foam. Comes in 1 ft. square (64 tiles/box) and 2 ft. x 4 ft. (8 tiles/box);
various colors.
*CW2K2X4BLUEBOX 2' x 4', blue $226.00
*CW2K2X4CHBOX 2' x 4', charcoal $226.00
*CW2K2X4TANBOX 2' x 4', tan $226.00
*CW2K12X12CHBOX 1' x 1', charcoal $226.00
*CW2K12X12BLUEBOX 1' x 1', blue $226.00
*CW2K12X12BEIGEBOX 1' x 1', beige $226.00
*CW2K12X12TANBOX 1' x 1', tan $226.00
Acoustics First Sonora
Acoustic Panels
Sonora acoustic panels are high density
(7 lbs. per cubic foot) glass fiber panels covered
with an acoustically transparent fabric. Edges
are chemically hardened. Available in 5 edges
and 48 fabric colors. Call for details. AFR124 is a
1" x 2' x 4' panel. Sold as each.
*AFR124 $72.00
Auralex Mounting Products
Auralex Foamtak acoustic foam spray adhesive can be applied
either lightly for removable applications, or heavily for a more
permanent bond. Mounts up to 96 sq. ft. per can.
Auralex Tubetak Pro (not shown) is a super-strong, liquid adhesive
that can be applied with a standard caulking gun, providing a
permanent bond for mounting acoustic foam or diffusors. Covers
up to 32 sq. ft. per 10.58 oz. tube.
*FOAMTAK $19.95
*TUBETAKPRO $8.99