Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
order/info: 1·800·426·8434 • www.bswusa.com<br />
Broadcast Tools Transmitter Site<br />
Controllers with Dial-Up or Web Access<br />
Trust Broadcast Tools for affordable, reliable solutions…and here’s another first – an<br />
8-channel remote control unit for roughly a grand! The affordable WVRC-8 provides<br />
a one rack-unit solution for web based and/or dial-up transmitter site control. The<br />
WVRC-8 was designed from the user’s point of view, so all of the basic functionality<br />
you need is included to control your site equipment. The WVRC-8 is equipped with a<br />
browser-based event function program scheduler and alarm logger, while the user<br />
may select from four email recipients when an out-of-tolerance alarm is generated.<br />
The WVRC-8 is equipped with eight high-resolution analog (telemetry) channels,<br />
while each of the eight optically isolated status channels may be configured for 5 to<br />
24vdc wet or dry (contact closures) status monitoring. The eight control channels are<br />
equipped with independent SPST one-amp relays for each raise/on and lower/off<br />
function. The WVRC-8 is supplied with spoken words and phrases in English, while<br />
the user is free to record words and phrases in their language. In addition, the WVRC-<br />
8 may be programmed for dial-up operation via HyperTerminal, while the Java<br />
applet programming can be performed using your favorite web browser.<br />
The WVRC-4 is a cost-effective, half-rack 4-channel version with just a few less bells<br />
and whistles. For details go to www.bswusa.com.<br />
WVRC8 List $1,099.00<br />
Call BSW For Lowest Price: 800-426-8434<br />
WVRC4 List $649.00<br />
Broadcast Tools<br />
Temperature<br />
Sentinel<br />
This Ethernet-based<br />
temperature monitor is<br />
equipped with one SPDT<br />
electro-mechanical relay. It can<br />
communicate with 4 digital temperature<br />
sensors and one optically isolated contact<br />
closure input.<br />
TEMPERATURESENTINEL List $229.00 $199.00<br />
Broadcast Tools DC8PLUS<br />
Dial-Up DTMF Controller<br />
DC8PLUS will answer an access code of up to 8 digits.<br />
It will allow the control of 8 form-A relays and the<br />
monitoring of 8 logic level status input. Each relay may<br />
be for momentary, latching or interlocking closures.<br />
DC8PLUS List $459.00 $379.00<br />
Broadcast Tools Smart Relay 4<br />
This interface provides four independent 2PDT relay<br />
and eight optically isolated 5Vdc to 24Vdc wet or dry<br />
inputs. It converts sustained network closures to a<br />
pulse. User programmable logic and pulse stretching<br />
may be set from 50ms to 99 hours, 59 minutes and<br />
59.99 seconds.<br />
SMARTRELAY4 List $199.00 $179.00<br />
GPI-32<br />
Broadcast Tools GPI Series General<br />
Purpose Interfaces with 32 or 24 Inputs<br />
The GPI-32 interfaces 32 optically isolated inputs to a PC's RS-232 or<br />
USB port, with serial data conforming to Broadcast Tools’ standard<br />
switcher PIP format. It features dual RS-232 connectors (one for daisy-chaining multiple units on<br />
the same legacy serial port and a DB-9 to interface to the supplied USB adapter), power and input<br />
GPI-24<br />
LEDs, dual plug-in Euroblock connectors, two independent DB-37 connectors and twin power connectors. DB-37<br />
cables and serial cable included. The GPI-24 interfaces 24 optically isolated inputs. You can configure each input<br />
to generate ASCII, HEX or control character strings on each rising and/or falling input transition. You also get three<br />
additional pre-programmed selections: the "PIP" GPI format, the AT-1616 format and the short ASCII format. It<br />
comes with a Smart USB-RS-232 adapter cable, DB-9 straight-through cable and AC power adaptor.<br />
GPI-32 32 optically isolated inputs to serial/USB List $339.00 $299.00<br />
GPI-24 24 optically isolated inputs to serial/USB List $229.00 $209.00<br />
Broadcast Tools Voice Alarm Dialer<br />
The Broadcast<br />
Tools VAD-2<br />
Plus is a user<br />
programmable<br />
two-input<br />
multi-number<br />
voice/pager auto dialer with integrated<br />
stereo silence sensor, temperature sensor<br />
and power failure port designed for dial out paging<br />
and/or voice message notification. The VAD-2 Plus<br />
is equipped with two wet or dry optically isolated<br />
inputs, temperature sensor port, power failure input<br />
and stereo silence sensor, which when tripped, will<br />
sequentially dial a pager and/or up to four different<br />
phone numbers and play back a user recorded<br />
message corresponding to the tripped input. The VAD-<br />
2 Plus is also provided with two SPDT one amp relays<br />
for the control of external equipment.<br />
VAD-2PLUS List $329.00 $284.95<br />
Broadcast<br />
Tools DTMF<br />
Encoder/<br />
Decoders<br />
The Broadcast Tools<br />
DTD-16 is an affordable DTMF tone/sequence decoder<br />
that is programmable to decode up to four sequences<br />
or a single tone and assign it to any one of four relays,<br />
twelve open collectors and/or the RS-232 port. The<br />
DTE-16 is an encoder.<br />
DTD16 List $199.00 $169.00<br />
DTE16 List $199.00 $169.00<br />
Broadcast Tools SRC-16<br />
16-Input Serial Remote<br />
Control Computer Interface<br />
The Broadcast Tools SRC-16 is a computer interface to<br />
the real world. Connecting through an RS-232, RS-422<br />
or RS-485 serial port with baud rates up to 38400, the<br />
SRC-16 can notify your PC software program if any<br />
of 16 optically isolated inputs have been opened or<br />
closed, and allows your software to control sixteen<br />
SPDT, 1-amp relays. It comes supplied with three preprogrammed<br />
format selections: the "PIP" GPI format,<br />
the AT-1616 format and the short ASCII format, which<br />
is used by a number of radio automation suppliers. The<br />
SRC-16 sports LED indicators to display input and relay<br />
status. Half-rack chassis. Optional RA-1 rack shelf.<br />
SRC16 List $419.00 $371.99<br />
Accessories:<br />
RA-1 Rackmount shelf $49.00<br />
Broadcast<br />
Tools Site<br />
Sentinel 4<br />
Remote Site Monitor<br />
The Site Sentinel 4 (for use with the Internet)<br />
provides an Ethernet port, 4 channels of metering<br />
inputs, optically-isolated status (contact closures or<br />
external voltages) inputs, normally open dry contact<br />
relays, power failure input and a stereo silence<br />
sensor input. The Site Sentinel 16 gives you 16<br />
channels of metering inputs.<br />
SITESENTINEL4 List $399.00 $349.00<br />
SITESENTINEL16 List $1,099.00 $979.00<br />
Broadcast Tools<br />
ESS-1 Serial-to-<br />
Ethernet Interface<br />
The ESS-1 is ideal for<br />
applications requiring data support for both RS-232<br />
and RS-422 communications. The ESS-1 provides<br />
Ethernet connectivity to any device with a serial port,<br />
and is ideal for serial tunneling or applications where<br />
a COM port, TCP Socket, UDP Socket, or UDP Multicast<br />
functionality is needed.<br />
ESS-1 List $169.00 $149.00<br />
RF EQUIPMENT – REMOTE SITE CONTROL<br />
73
Change language