Molykote(R) Thread Pastes (Asia Products)

More documents

Recommendations

Info

3400 A Leadfree Heating curing dry lubricant. • Sliding contact of metal/metal combinations with slow to moderately fast movements and high loads • Used successfully in automotive applications such as: Pins, springs and bearings surfaces in brakes, body hinges and linkages • Moving parts in locks, switches, ventilation controls and servo mechanisms • Under the hood linkages exposed to dust, moisture, fuels, oils and other contaminants • Hinge pins, sleeve bearings and cams • Servo mechanism and instrument bearing • <strong>Thread</strong>ed connections and fasteners • Excellent lubrication • Excellent corrosion protection • Good solvent resistance • High load carrying capacity • Excellent adhesion to metal • Low coefficient of friction • High resistance to oil and fuels • Solid lubricants • Organic binder • Solvents Grey 1.2 42 -200 to +430 10 30/200 p=16000* p=48000* p=50000* p = >500* (spraying / dipping) p = >240* (dip - spinning) Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20µm. Tin: 500g Container: 5kg When stored at or below 20°C in the original unopened containers, this product has a usable life of 24 months from the date of production. 61
Dry Film Film Lubricant Lubricant Product 3402 C D 3484 Description Applications Air-curing dry lubricant. • Excellent combination of corrosion protection and lubrication • Used on main axle threads of drill hammers, spindles Heat-curing, anti-friction coating. • Sliding contacts of metal/metal combinations with slow to moderately fast movements and moderate to high loads • Used successfully for carburetor springs, lorry-coupling sleeves, toothed gears and parts of car safety belts and car-boot lock parts • Bolts and levers in tractors and construction machines Features Composition Typical Properties Color Physical properties Density at 20°C Viscosity at 20°C (DIN3 cup) Viscosity at 20°C (DIN4 cup) Non-volatile content pH at 20°C Temperature Service temperature range Curing time Drying time at 20°C Load-carrying capacity, wear protection, service life Falex load-carrying capacity g/ml s s % °C min./°C min. N • Excellent corrosion protection • Excellent lubricity • Air-curing • High load carrying capacity and wear resistance • Solid lubricants • Organic binder • Corrosion inhibitor • Solvent Grey 1.08 47 34.5 -200 to +310 120/20 15 s=10700* • Combines excellent lubricating effect with good corrosion protection • Fast curing, hence particularly suitable for series production operations • High load carrying capacity • High abrasion resistance, hence long service life • Solid lubricants • Organic binders • Solvents Grey-black 1.11 18 35 -70 to +250 10/170, 5/200 b=12500* LFW-1, rotating F=680 N, n= 72 rpm, v=7.9 m/min Number of revolutions x1000 to µ=0.1 LFW-1, rotating F=2860N, n=72 rpm, v=7.9m/min. No. of revolutions x1000 to µ=0.1 LFW-1, oscillating F=900N, frequency=89.5osc/min. No. of oscillations µ=0.08 Corrosion protection Fretting corrosion - Deyber tester Salt spray test Resistance Radiation resistance Coefficient of friction Screw test: Erichsen, µ thread Screw test: Erichsen, µ head Application method Packages Usable life and storage h rad s=45* s=25* 10 8 Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20µm. Tin: 500g Container: 5kg When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production. b=298000* p=126000* s=149000* b=90000* p=245000* s=306000* 18 Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20µm. Tin: 500g Container: 5kg, 50kg When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production. 62 * Surface pretreatment: b=blanc, p=phosphated, s=sandblasted
Page 1 and 2: Pastes Molykote pastes consist of a
Page 3 and 4: Thread Pastes Pastes Product P 74 1
Page 5 and 6: Assembly Pastes Pastes Product G-Ra
Page 7 and 8: Grease Pastes Pastes DX Product E D
Page 9 and 10: Metal Forming Forming Paste Paste P
Page 11 and 12: Mineral Oil Greases Oil Greases Mul
Page 13 and 14: Mineral Oil Greases Oil Greases Pro
Page 15 and 16: Mineral Oil Greases Oil Greases Des
Page 17 and 18: Semi-synthetic Greases Greases Prod
Page 19 and 20: Synthetic Greases, Greases, PAO PAO
Page 21 and 22: Synthetic Greases, Greases, PAO PAO
Page 23 and 24: Synthetic Greases, Greases, POE POE
Page 25 and 26: Synthetic Greases, Greases, Fluoros
Page 27 and 28: Synthetic Greases, Greases, PFPE PF
Page 29 and 30: Synthetic Grease, Grease Silicone S
Page 31 and 32: Synthetic Grease, Grease Silicone S
Page 33 and 34: Compounds Dow Corning ® Product Do
Page 35 and 36: Oils / Dispersions Oils Molykote oi
Page 37 and 38: Synthetic Oils Oils S-1501 Product
Page 39 and 40: Dispersions Description Application
Page 41 and 42: Dispersion, Metal Forming Metal For
Page 43 and 44: Corrosion Protection Protection Oil
Page 45 and 46: Coatings Molykote Anti-Friction Coa
Page 47: Dry Film Film Lubricant Lubricant P
Page 51 and 52: Corrosion Protection Protection Pro

Molykote(R) Thread Pastes (Asia Products)

Create successful ePaper yourself

Delete template?

Save as template?