Molykote(R) Thread Pastes (Asia Products)
Molykote(R) Thread Pastes (Asia Products)
Molykote(R) Thread Pastes (Asia Products)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7400<br />
Air-curing dry lubricant.<br />
7405<br />
Heat-curing dry lubricant.<br />
7409<br />
Heat-curing dry lubricant.<br />
• Sliding contacts of metal/metal combinations with slow<br />
to moderately fast movements and high loads<br />
• Suitable for improving the running-in of gearboxes,<br />
sliding bearings and sliding guides<br />
• For running-in car transmission shafts, for the<br />
maintenance-free, permanent, non-soiling lubrication of<br />
threaded sleeves of car seat adjusting mechanisms, and<br />
for the cold working of steel<br />
• Free from flammable solvents<br />
• Water-based, environmentally friendly<br />
• High load_carrying capacity<br />
• Low coefficient of friction<br />
• Solid lubricants<br />
• Inhibitor<br />
• Organic binder<br />
• Water<br />
• Stabilizers<br />
• For metal/metal and metal/plastic combinations with<br />
slow to moderately fast movements and low to medium<br />
loads<br />
• Suitable for car door locks, small parts of cameras,<br />
cylinder head bolts and self-tapping screws<br />
• Avoidance of stick-slip<br />
• Resistant to oil, grease and solvents<br />
• Good corrosion protection<br />
• Electrically insulating<br />
• Low coefficient of friction<br />
• Resistant to adhesion and abrasion<br />
• Solid lubricants<br />
• Organic binder<br />
• Solvent<br />
• Sliding contacts of metal/metal combinations with slow<br />
to moderately fast movements and moderate to high<br />
loads<br />
• Suitable for oscillating movements or intermittent<br />
operations. For improving the running-in process, for<br />
permanent lubrication at high temperatures and also<br />
where oils and greases cannot be used<br />
• Used successfully for piston rings and tappets of<br />
combustion engines, magnetic armatures of vehicle<br />
starter motors, parts of vehicle brakes, locks, hinges<br />
and pumps<br />
• Corrosion protector for hydraulic and pneumatic parts<br />
• Outstanding lubrication, coupled with corrosion<br />
protection properties<br />
• Resistant to oil, grease, solvents and many other<br />
chemicals<br />
• Avoidance of fretting corrosion<br />
• Solid lubricants<br />
• Organic binder<br />
• Solvent<br />
Dark grey<br />
1.16<br />
24<br />
30<br />
8<br />
-70 to +200<br />
5/90, 10/50, 40/23<br />
15<br />
Yellowish, transparent<br />
1.04<br />
-70 to +200<br />
60/120<br />
Greyish black<br />
1.10<br />
80<br />
31<br />
-70 to +380<br />
30/220, 120/150<br />
p=11300*<br />
s=7900*<br />
b=8000*<br />
p=63*<br />
s=14700*<br />
p=343*<br />
p=364*<br />
p=76*<br />
p=4*<br />
p=214*<br />
10x10 6<br />
36x10 6<br />
10 9<br />
Stir the Anti-friction Coating thoroughly before applying by<br />
spraying, dipping, centrifuging or brushing. Recommended<br />
dry film thickness: 5 to 20µm.<br />
Tin: 500g<br />
Container: 5kg<br />
When stored between -10°C and 40°C in the original<br />
unopened containers, this product has a usable life of<br />
12 months from the date of production.<br />
0.13<br />
0.09<br />
Stir the Anti-friction Coating thoroughly before applying by<br />
spraying, dipping, centrifuging or brushing. Recommended<br />
dry film thickness: 5 to 20µm.<br />
Tin: 500g<br />
Container: 5kg<br />
When stored at or below 23°C in the original unopened<br />
containers , this product has a usable life of 60 months<br />
from the date of production.<br />
Stir the Anti-friction Coating thoroughly before applying by<br />
spraying, dipping, centrifuging or brushing. Recommended<br />
dry film thickness: 5 to 20µm.<br />
Tin: 500g<br />
Container: 5kg<br />
When stored at or below 20°C in the original unopened<br />
containers, this product has a usable life of 60 months<br />
from the date of production.<br />
63
Change language