Canfield Connector Buyer's Guide

Technical Data
• CMOS digital circuitry
• Maximum output current:
1 Amp
• Maximum timer current draw:
15 mA (No load)
• Maximum allowable DC ripple:
20% peak to peak
• Maximum input voltage tolerance: +/-10%
• Ambient temperature range:
-20° to +60° C
• Input Voltage Range:
Timing Diagram
Upon application of power to
the input terminals, the OFF
cycle is initiated. At the end of
the preset OFF time, the
solenoid is energized and the
ON cycle begins. At the end
of the preset ON time, power
is removed from the solenoid
and a new cycle begins.
Cycling continues until power
is removed from the input
terminals.
12-240 VDC
24-240 VAC (50/60 Hz)
• 15 turn time adjustment potentiometers for accuracy
• Wire gauge:
∆T 1
∆T 2
20 AWG cable or 18 AWG
cordset
T 1
= OFF TIME - 1 min. to 45 min.
T 2
= VALVE ON TIME - .25 sec. to 25 sec.
CRT
Ordering Information
Connector Orientation
1 - ISO ground up & down
2 - ISO ground right & left
3 - MINI ground down
4 - MINI ground up
5 8 4 - 1 0 R 5
Wiring Length
P - 120 VAC 6 ft Cordset
9 - 9 ft cable
Ordering Example:
5841 - P10R5
ISO ground up & down, 6 ft cordset, 120-240 VAC.
Each kit contains screw, washer and gasket assembly.
Custom Time Ranges are Available.
Consult Factory for Details.
Optional Adjustment Tool
part # 5000-TOOL
43