29.10.2012 Views

Aspire 7230/7530/7530G Series Service Guide - tim.id.au

Aspire 7230/7530/7530G Series Service Guide - tim.id.au

Aspire 7230/7530/7530G Series Service Guide - tim.id.au

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Super-Multi Drive Module<br />

Item Specification<br />

Vendor & model name HLDS/GSA-T50N, Philips DS-8A2S, Toshiba Digi/TS-L633A<br />

Performance Specification With CD Diskette With DVD Diskette<br />

Transfer rate (MB/sec) Sustained:<br />

Sustained:<br />

Max 3.5 Mbytes/sec<br />

Max 10 Mbytes/sec<br />

Buffer Memory 2MB<br />

Interface SATA<br />

Applicable disc format Applicable media types:<br />

Writing:<br />

Loading mechanism<br />

Power Requirement<br />

Confirms to DVD+R Version 1.2 and DVD+RW Version 1.3 / DVD+R DL<br />

Version 1.0 /DVD-R Version 2.0 / DVD-RW Version 1.2 / DVD-R DL Version<br />

3.0.<br />

Reading:<br />

DVD single/dual layer (PTP, OTP), DVD-R single/dual layer<br />

DVD+R single/double layer<br />

DVD-RW<br />

DVD+RW<br />

CD-DA<br />

CD-ROM<br />

CD-ROM/XA<br />

Photo-CD, Multi-session, V<strong>id</strong>eo CD<br />

CD-I FMV, CD Extra, CD Plus, CD-R, and CD-RW<br />

Drawer (Soleno<strong>id</strong> Open)<br />

Tact SW (Open)<br />

Emergency Release (draw open hole)<br />

Input Voltage DC 5 V +/- 5%<br />

Thermal Sensor Control<br />

Item Specification<br />

Thermal Sensor Chip GMT-786 / W83L771<br />

Package 8-pin SSOP<br />

Features Thermal sensor control Interface<br />

Interface I 2C bus, address: 98h<br />

BIOS<br />

Item Specification<br />

BIOS vendor Phoenix BIOS code<br />

BIOS Version v0.3325 (for MP units)<br />

BIOS ROM type WND 1MB CMOS Boot Block Flash Memory<br />

BIOS ROM size 1MB<br />

BIOS package 8 pins SOP<br />

Block size 64kbytes per block<br />

Supply Current • Active current = 5 mA (Typical)<br />

• Standby current= 1 µA (Typical)<br />

Chapter 1 23

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!