3000 Series Indicators Instruction Manual - MaRCo
3000 Series Indicators Instruction Manual - MaRCo
3000 Series Indicators Instruction Manual - MaRCo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>3000</strong> <strong>Series</strong> <strong>Indicators</strong><br />
EN-35<br />
TABLE 7-1. TROUBLESHOOTING (Cont.).<br />
SYMPTOM PROBABLE CAUSE(s) REMEDY<br />
Err 9.0 Internal fault Service required.<br />
Err 9.5 Calibration data not present. Calibrate scale.<br />
Err 53 EEPROM data incorrect. Service required.<br />
CAL E<br />
LOW.rEF<br />
Calibration Error. Calibration value outside<br />
allowable limits.<br />
The average piece weight of the parts is small<br />
(warning).<br />
Repeat calibration using correct calibration<br />
weights.<br />
Use parts with average piece weight greater<br />
than or equal to 1 division.<br />
7.4 Service Information<br />
If the troubleshooting section does not resolve your problem, contact an authorized Ohaus Service Agent. For Service assistance<br />
in the United States, call toll-free 1-800-526-0659 between 8:00 AM and 5:00 PM Eastern Standard Time. An Ohaus Product<br />
Service Specialist will be available to assist you. Outside the USA, please visit our website www.ohaus.com to locate the Ohaus<br />
office nearest you.
Change language