Download - Weatronic

Product information

That is why responsible pilots and model maker choose weatronic ® 

Two redundant transmitting and 

receiving systems 

Our transmitter modules and receivers* are operating with 

2 independent transmitting and receiving systems that 

are permanently adjusting their data (redundant 

systems). As if in a restaurant the 2 waiters 

would have taken your order, have mutually 

controlled their versions and then in the 

kitchen both orders would have been 

compared before starting the stove. 

Individual 

as yourself 

Tuning your model with 

our GigaControl software 

you feel like a musician playing 

the piano and composing 

your own masterpiece. Starting 

with control features assignment 

you proceed via servo curves of your own 

to the sum channels, servo supply voltage and 

other features tuning your model like a musical 

instrument till it sounds just perfect!

Using 80 channels 

The more hopping frequencies you have at your disposal the safer is data 

transmission. It makes a great difference when only two ways are leading 

to my destination or my navigation is choosing the best route of 80 possible 

– and this at the rate of 100 per second! 

Data recording – a MUST in the real flying 

The least failures in the system could be identified, crash 

reasons would be clarified, flight characteristics and control 

would be optimised and the information of the stored 

thresholds gives you confidence. The automatic report saved 

on SD-card in every weatronic ® transmitter module and in 

weatronic ® receivers Gizmo as the basis of your professional 

knowledge. 

Every weatronic ® receiver has full 

telemetry capabilities 

You as a pilot determine the information. Depending 

on connected modules our receivers could capture all 

telemetry data, route them further and process. 

YOU determine which values, thresholds or other 

data you need in the cockpit – from air speed, 

temperature and voltage, signal strength up to 

climb or descent rate. 

* but for Clever 6 and Tiny 5

weatronic ® – your specialist in 2,4 GHz-band 

Our company located in the Aerospace Centre in Wildau develops and manufactures 

products designed to provide you the highest operation reliability 

and disturbance immunity. Quality and reliability are of the top priority to 

our experienced hard- and software specialists. We ensure you will enjoy our 

products and guarantee you their reliability. 

Enthusiasm of the highest level and absolute passion: 

+ All our transmitters and receivers 

have two independent parallel transmitting 

and receiving systems providing 

optimal transmission reliability 

(redundant system*) 

+ Connect up to 8 servos per channel 

for the maximal availability and 

mechanical force 

+ Individually programmable for mixer, 

servo curves, sequencer functions, 

etc. our devices meet the highest 

requirements 

+ Playback your flight experiences on 

your PC – also in 3D – due to recording 

of ALL the captured data on 

micro-SD card 

+ Experience your flight retrospectively 

in Google Earth 

+ Amazing variety of programming 

possibilities enabled by our provided 

software makes your heart beat 

faster 

+ Our free software updates keep you 

always up to speed and guarantees 

compatibility and your investment 

+ Sample configurations to practice, 

test and marvel 

+ Enjoy your co-pilot with the voice 

output of telemetry data in real time 

+ The joy of flying guaranteed by our 

very long operating distance with 

maximal reliability 

(* but for Clever 6 and Tiny 5)

quality by 

passion

weatronic ® – hand-held transmitter BAT 60 and tray BAT 64 

High-tech standard made in Germany in 

the Aeronautic Centre: 

• 9x ballbeared sticks 

• wear-free thanks to the hall-sensors 

• innovative gas- / brake handle concept 

• 22 (28) free programmable control elements 

• 5ʺ capacitive touch screen 800 x 480 colour LCD 

• „Look and find“ function due to built in GPS receiver 

• web interface for external access and programming 

• separate charge controller for each Li-Ion cell 

• one battery is always reserved as 25% reserve 

for the safer landing 

• micro-SD card for data recording 

• USB-A and USB-B (master und slave) 

• 3,5 mm headphones exit 

• two parallel transmitting and receiving systems 

• optional 3-axial gyro 

• optional 3-axial positioning with acceleration sensors 

• optional WLAN and Bluetooth, UMTS via USB 

• optional with control functions in stick and selectable stick 

length 

Developed to the new ETSI standard 

EN 300 328 V1.8.1 

weatronic ® – hand-held transmitter BAT 60

Technical data: 

• transmission: adaptive frequency hopping 

operation with “listen before talk” function 

• hopping-frequencies: 80 

• hopping-speed: 100 Hz 

• antennas: 2 x patch antennas 

(angle of radiation > 180°) 

• 4 Li-Ion batteries à 3000 mAh 

• integrated GPS receiver 

• operating- and charging voltage: 

10,0 – 20,0 Volt 

• temperature range: -10 °C to +60 °C, 

non-condensing 

• dimensions: 220 x 200 x 51 mm / 8,7 x 7,9 x 1,9ʺ 

(L x W x H) 

weatronic ® tray transmitter BAT 64 

Available in season 2013. 

Changes and errors reserved.

Transmitter module DV4 

Safety and reliability are the basis of our work. Therefore 

the weatronic ® systems are transmitting and receiving 

respectively via two flat top antennas (redundant systems) 

which means DOUBLE safety. Our transmitter modules are 

considerably ahead of conventional rod antennas due to 

their construction and ideal hemispherical radiating parameters. 

Further advantages mean in use: 


• transmission: adaptive frequency 

operation (principle) 

• hopping frequencies: 80 

• hopping speed: 100 Hz 

• antennas: 2 x patch antennas 

(angle of radiation > 180°) 

• transmitting power: 20 dBm (100 mW) 

• status indicator: 3 LED on the housing 

• operating voltage: 5,0 – 10,0 Volt 

(additional tension (voltage) regulators 

are plugged in some mounting adaptors) 

• current consumption: ca. 200 mA 




• weight: 60 g / 2,1 oz 

• recording of all transmitted and received data 

to the Micro-SD card in transmitter module 

• optical and acoustical warnings 

• voice output of telemetry data of the model 

and during the flight 

• telemetry units send their data directly to 

the transmitter module 

• the easiest modification of most available 

transmitters (usually “plug and play” principle) 

• upgradeable, therefore always up to date 

• optional transfer of telemetry data via 

Bluetooth 

• very long operating distance, 

over 5.000 meters with 

unobstructed view

Gizmo 

High-end product for demanding and professional pilots. 

The utmost safety and reliability are combined in this 

double receiver. 

I.a. achieved due to: 

• up to 16 channels and 30 servo outputs 

• 8 separate servo banks shortcircuit safe and 

voltage regulated (each bank 6 or 7,4 Volt selectable) 

• optional 3 gyros und optional with GPS 

• full telemetry compatible 

• integrated, loss free double current (power) supply 

• SD-memory card space as the „Black Box“ 

(flight data recorder) 

• automatic servo synchronisation 

• switchboard (external on/off switch, binding) 

• 2 antennas inputs (SMA) 

• battery test when switching on 

• simple, individually 

programmable channels 

• upgradeable, therefore 

always up to date 


• transmission: adaptive frequency 

operation (principle) 



• operating distance: > 3.000 meters, 

with patch-antenna > 5.000 meters 

(unobstructed view) 

• antennas: 2 x SMA-adaptors 

(serial 2 x 200 mm ) 

• telemetry transmitting power: 20 dBm 

(100 mW) 

• inputs: 2 x for external gyros 

• status indicators: 2 LED on the switchboard, 

3 LED on the housing 

• operating voltage: 6,0 (5,0) – 10,0 Volt 

(it is not possible to switch on the device 

if both batteries are under 6,0 Volt ) 

• current load up to 40 A DC 

(temperature sensitive) 



• dimensions: 143 x 84 x 27 mm / 

5,6 x 3,3 x 1,1ʺ 

• weight: 270 g / 9,5 oz

Micro 10 (12) Dual Receiver 2,4Dual FHSS 

This series stands for the most successful and the upmost 

variable purpose module of weatronic ® . Double safety goes 

here without saying together with: 

• 12 channel receiver for connecting of 10 or 12 servos 

• 2 antennas with 2 HF-parts providing permanent matching 

signal packets 

• very high noise immunity 

• optional with up to 3 gyros 

• 2 additional battery connectors (Micro 10) 

• 32-Bit-ARM-processor for receiving signal and 

control functions 

• pre-programmable setting adjustment of each channel 

in case of interference (failsafe) 


• simple, individual programming of each channel 


• transmission: adaptive frequency operation 

(principle) 



• operating distance: > 3.000 m 

(unobstructed view) 

• antennas: 2 x 190 mm – effective antenna 

length: 29 mm 


• current consumption: max. 130 mA (with gyro) 

• current load: max. 5 A DC for servos 



• dimensions: 62,5 x 25,3 x 17,1 mm / 2,5 x 1,0 x 0,7ʺ 

• weight: 15 g / 0,53 oz


• transmission: adaptive frequency operation (principle) 



• operating distance: > 3.000 m (unobstructed view) 

• antennas: 2 x 190 mm – effective antenna length: 29 mm 

• telemetry transmitting power: 20 dBm (100 mW) 


• current consumption: max. 130 mA (with gyro) 


• temperature range: -10 °C to +60 °C, non-condensing 

• dimensions: 54,8 x 34 x 18,8 mm / 2,1 x 1,3 x 0,7ʺ 

• weight: 30 g / 1,05 oz 

Smart 8 Dual Receiver 2,4Dual FHSS 

Double safety and high power are combined in the small and light dual receiver. 

Small und mid-size models showing here the real benefits of the premium class 

technics, variable control possibilities accompanied with the maximal safety. 

This includes: 

• 12 channel receiver for direct connecting of up to 8 servos 

• 2 antennas with RF-parts adjusting permanently signal packets 

• enormous noise immunity 

• optional with one gyro 

• 32-bit-ARM-processor for receiving signal and control functions 

• pre-programmable setting adjustment of each channel in case of interference (failsafe) 



• sum-channel (12 channels), ideal for quadrocopter, external gyros und power box

Clever 6 Receiver 2,4Dual FHSS 

The receiver for small models. Small and light, with good operating distance 

this 12 channel receiver offers the enormous noise immunity. 

Additional features: 

• 6 direct outputs 



• pre-programmable setting adjustment of each channel in case 

of interference (failsafe) 



• sum-channel (12 channels), ideal for 

quadrocopter, external gyros 

and power box 


• transmission: adaptive frequency operation 



• operating distance: ca. 1.500 m (unobstructed view) 

• antennas: 1 x 90 mm – effective antenna length: 29 mm 



• current consumption: max. 90 mA 


• temperature range: -10 °C to +60 °C, non-condensing 

• dimensions: 46,5 x 24,1 x 13,1 mm / 1,8 x 0,9 x 0,5ʺ 

• weight: 9 g / 0,31 oz

Tiny 5 Receiver 2,4Dual FHSS 

This receiver is designed for the smallest models. Very small, very light with 

integrated chip antenna and without external antenna cable this 5 channel 

receiver offers the solid operating distance and enormous noise immunity. 

Additional features: 

• 5 direct outputs 






• sum-channel (12 channels), ideal for quadrocopter, external gyros und power box 

Developed to the new ETSI standard EN 300 328 V1.8.1 


• transmission: adaptive frequency hopping operation (principle) 

with Listen before Talk function 

• hopping-frequencies: 80 

• hopping-speed: 100 Hz 

• operating distance: < 500 m (unobstructed view) 





• temperature range: -10 °C to +60 °C non-condensing 

• dimensions: 40 (30) x 18 x 9 mm / 1,6 (1,2) x 0,7 x 0,3ʺ 

• weight: 4,5 g / 0,16 oz

LinkVario / LinkVario Duo 

Variometer system „LinkVario“ is an acoustic precision variometer with altimeter 

and voice output. More fun with thermal flying – you can fly longer, especially with 

weak thermal lift. 

• suitable for TEK pitot tubes, thereby presenting the real energy 

(potential and kinetic) of a glider 

• connection of external sensors of SM-modelling 

• for optimisation and adjustment of the flight components 

• available with 1 or 2 air sensors 

• current supply: 4 to 10 V (from the receiver or receiver battery) 


• variometer resolution: better than 0,5 cm/s 

• variometer range : +10/-5 m/s 

• altitude resolution with LinkVario Duo: typical 0,1 m 

• altitude measuring: up to 3.200 m MSL 

• LinkVario voltage control: up to 10 V 

• dimensions: 60 x 24.5 x 14,5 mm / 2,4 x 1,0 x 0,6ʺ without TEK pitot adaptor 

• current consumption: typical 15 mA 

• weight: 13 g / 0,46 oz 

Modern GPS-module for the weatronic ® telemetry system 

Due to its compact size our module could be built in almost 

every model. At your disposal voice output of the self defined 

warning limits. Model position would be recorded in the log 

file on Micro-SD Card. 

This includes: 

• altitude in meters or feet 

• speed in km/h; m/s; m/h; knots 

• distance in meters or feet as a slant range 

• course in degrees 

• position in decimal degrees, e.g. 47.723159, 10.28286 

• speed over ground

Modern GPS-module for the weatronic ® telemetry system 


• μ-Blox 5 GPS & GALILEO SuperSense ® GPS 

chip set 

• internal patch antenne 

• position update rate: 4 Hz 

• velocity error: 0,1 m/s 

• new data capture: 1 second, average 

• warm start: 3,5 seconds, average 

• cold start: 30 seconds, average 

• current supply: 4 to 10 V 

(from the receiver or receiver battery) 


• operating temperature range: -20 °C to +70 °C 


• weight without cable: 23 g / 0,81 oz

MUX-Box 

MUX-Box is a connection between weatronic ® 

receivers and sensors in the model. 

• up to 10 external sensors could be connected 

• programmable 

• different recording – (logging-) rates are selectable 

• internal calculations are possible 

• digital input protected with optocoupler 

• 3 switching outputs e.g. for LED 

• up to 4 MUX-boxes cascadable 


Switch 4 – our performance-FET switch with 4 outputs 

Our „little one“ – a switch module with four outputs and special features: 

• each output is up to 10 A resilient (total 20 A at the same time) 

• for the first time „plus“ switched therefore much easier to wire the model 

• dimmable outputs 

• connection to any servo output 

• connection directly to the MUX-box 

• programmable 

• 14 blink- / switchmodes preprogrammed 

• short-curcuit proof 

• overheating protection 



• operating voltage fed to servo adapter: 3,2 – 10,0 V 

• current consumption: depending on switching status 

15 – 40 mA 

• voltage allowed to be connected: 2 – 16 V 

• max. current load per channel: 10 A 

• total current load: 20 A 

• switching frequency (PWM): max. 400 Hz

Patch-antenna 

Use of our patch antenna provides 

your model higher reliability and 

longer operating distance: 

• superior transmitting and 

receiving characteristics 

• up to 10 dB gain compared to 

stub antennas 

• hemispherical radiating pattern 

• no polarisation loss and therefore 

no more position dependance 

• weight: 18 g / 0,63 oz 

Also available as 5,8 GHz FPV-antenna

FUN AND 

RELIABILITY OF 

THE HIGHEST 

LEVEL!

Software GigaControl 

No matter if you are a beginner or a professional with the highest requirements 

– with this software you will easy and simple make all personal and substantial 

adjustments of the complete unit 

including: 

• allocation and configuration up to 30 servos 


• adjustment of single servo curves 

• activation of the full automatic servo synchronisation for the optimal ganged operation, 

power and minimal current consumption 

• warning limits configuration 

• big display of three relevant values (data) 

• display overview of all servo connections at a time (monitoring) 

• configuration of LinkVario limit values and messages 

• adjustment of possible GPS-messages and threshold values 

• MUX-box control 

• spectrum indication of the actual channel allocation (assignment) on the airfield 

• overview, control and processing of complete data from the log file in 2D and 3D

Telemetry 

Capture and monitoring of the flight data stand for the maximum safety. With weatronic 

systems the pilot has all the necessary data at his disposal like in a real cockpit. 

Almost every value will be captured and output e.g. 

• current, voltage 

• speed 

• climb and decent 

• temperature 

• visual or voice transmission 

of the data – „co-pilot“ 

• individually adjustable warning 

and announcement limits 

• free selectable announcement 

intervals 

• extendable with external sensors 

With Android-app for display on 

smart phones and tablets. 

“To keep your focus 

on flying!”

Accessories

cables 

antennas 

adapters 

fastening-parts 

kits 

jumpers 

sensors

weatronic GmbH 

Schmiedestr. 2A 

D-15745 Wildau, Germany 

Telefon: +49 / (0)3375 / 24 60 890 

Fax: +49 / (0)3375 / 24 60 891 

email: info@weatronic.com 

www.weatronic.com 

Your dealer: 

Gestaltung: 

Bilder: weatronic

Download - Weatronic

Create successful ePaper yourself

Delete template?

Save as template?