You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Edition Manual Product Page<br />
2008-05-19 Workshop Manual <strong>Mower</strong> <strong>Deck</strong>s 16<br />
Assembly<br />
1. Fit the blades according to the figure.<br />
The sharpened surfaces of the blades shall<br />
face in the rotation direction which is left<br />
when the deck is raised.<br />
Note the following when reassembling:<br />
• The blades and blade bar must be installed<br />
as in the figure.<br />
• The blades can be turned 1/3 of a turn in<br />
their mountings. Select positions so that<br />
the blades are offset 90° from each other.<br />
See "Synchronising, blades" at page 17.<br />
R<br />
Q<br />
P<br />
Tightening torque:<br />
Screws (P) - 45 Nm<br />
Shear bolts (Q) - 9.8 Nm<br />
In the event of a collision, the shear bolts (Q)<br />
can break and the blades bend back. If this has<br />
happened, install genuine shear bolts and<br />
tighten as above.<br />
P<br />
Q<br />
45 Nm<br />
2. Tighten all screws.
Change language