You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Edition Manual Product Page<br />
2008-05-19 Workshop Manual <strong>Mower</strong> <strong>Deck</strong>s 6<br />
5. Loosen the belt guide screws (K) a couple of<br />
turns.<br />
Villa, Ready<br />
K<br />
K<br />
Park 4WD<br />
6. Set the maximum cutting height.<br />
7. Work off the belt from the cutting deck pulley.<br />
8. Fit the belt to the machine pulley and after<br />
that to the cutting deck pulley.<br />
9. Tighten the belt guide screws (K).<br />
10.Tension the belt as follows.<br />
Park 4WD:<br />
Grip the belt tensioner’s lever with your left<br />
hand. Pull the lever and apply the tensioner<br />
to the outside of the belt with your right hand.<br />
K<br />
Park 4WD<br />
Villa, Ready:<br />
Tension the belt with the belt idler. The belt<br />
idler should be on the inside of the belt and<br />
pull out to the left (viewed from the driver’s<br />
position).<br />
Villa / Ready<br />
11.Install the belt cover (H) with the screws (I).
Change language