26" 6-drawer tool cHest 66702 - Harbor Freight Tools

Overall Dimensions
Maximum Weight
Capacity
Individual Drawer
Weight Capacities
26" Wide, 6-Drawer
Suspension System
Specifications
12.75"L x 26"W x 14.75"H
130 lbs
Drawer 1 (Max. load 17.5 lbs)
Drawer 2 (Max. load 22 lbs)
Drawer 3 (Max. load 22 lbs)
Tray (Max. load 33 lbs)
Heavy Duty Ball Bearing Slides
Unpacking
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
Save This Manual
Keep this manual for the safety warnings
and precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual
on the last page (or month and year of purchase if
product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
1.
2.
3.
4.
5.
1.
2.
Important SAFETY
Information
Assembly Precautions
Assemble only according to these instructions.
Improper assembly can create hazards.
Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly and
during use.
Keep assembly area clean and well lit.
Keep bystanders out of the area during assembly.
Do not assemble when tired or when under
the influence of drugs or medication.
Specific Safety Warnings
Do not exceed 130 lb. max. weight capacity
evenly distributed. Be aware of dynamic
loading! Dropping or bouncing a load may
briefly create excess load causing product
failure.
Do not open more than one drawer at a time.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Load and distribute evenly from the bottom
up.
Do not climb or stand on upper chest.
Inspect the product before use; do not use if
there are parts that are loose or damaged.
Use for intended purposes only.
The handle and swivel casters must be attached
to the same side of the product.
Do not stand on this product. You could fall,
which may cause personal injury.
Be careful when opening more than one
drawer. The product may become unstable
and tip.
When moving this product, do not pull it.
Push the product to prevent personal injury.
Do not attempt to lift the chest by the Side
Handles (1) using chains, ropes or other lifting
devices as the Side Handles may fail.
Wear safety glasses and gloves when cutting
the banding material. The bands may snap
and fly out.
Do not mount this product on a truck bed or
any other moving object.
Do not tow this product with power equipment
as the product could tip.
Secure this product well before moving it with
a forklift.
Do not alter this product in any manner. For
example, do not weld external lock bars or
attach electrical equipment.
Keep the product on level surfaces. The
product may become unstable and tip if
stored or moved onto an inclined surface.
Close the cover and lock the drawers before
moving this product. The drawers could
come open and make the product unstable
and tip.
When placing this chest onto a bottom chest,
be sure it sits on the bottom chest securely.
Failure to do so may cause the chest to slide
or fall off.
Spread the weight evenly in the drawers. If
the weight is not spread out evenly, the contents
could shift and fall out.
Save these
instructions.
SKU 66702 For technical questions, please call 1-800-444-3353. Page 2