PET Compressed Air Solutions - Ingersoll Rand

Type-30
Continuous Duty
The Type-30 compressor is an Ingersoll-Rand legend. The
basic design has been in service throughout the world for
more than 75 years. Now newly redesigned and improved
as a continuous duty unit, the Type-30 is perfectly suited
for intermittent blowing applications, such as single-step
injection blow molding or small two-step reheat blow
molding processes. The Type-30 is available in single or
dual base plate configurations. Our staff is ready to help
you select the right unit to fit your needs.
Type-30 Model 15T2
Type-30 Model 7T2
BENEFITS
• 100% Cast iron construction
• 2 or 3 stages of compression available
with maximum pressure rating up to 68 bar
• NEMA rated starter with hour meter
• Single point air and electrical connections
• Air-cooled aftercooler
• Fully adjustable pressure switch
• Pressure lubricated main and
connection rod bearings
• Mounted motor starter
• Continuous duty cycle
• Heavy-duty two-stage air inlet
particulate filter
• Centrifugal unloader
• Low level oil switch
• Rugged one-piece fabricated
baseplate
SPECIFICATIONS
Compressor Nominal Capacity Pressure Max Dimensions mm Weight
Model Stages kW m 3 /h Bar Bar L W H kg
T30 7T2x10 3 7.5 36.5 35 35 1250 890 850 295
T30 7T4x5 2 3.7 11.2 40 70 1250 890 850 341
T30 15T2x10 2 7.5 39.1 40 70 1420 970 840 432
T30 15T2x15 3 15 52.8 40 70 1420 970 840 432
T30 15T2x15D 3 25 105.7 40 70 2860 1960 1700 523
*Reference Conditions: Inlet Pressure — 1 Bar, Temperature 20°C
9