User Manual - John Preston

Contents
1 Mechanical adjustments to the adventure
1.1 Armrest height adjustment 4
1.2 Armrest length adjustment 4
1.3 Armrest sideways adjustment 6
1.4 Backrest height adjustment only function seat
(comfort and standard upholstery) 7
1.5 Backrest angle of inclination adjustment
Function seat 8
1.6 Backrest angle of inclination adjustment
Standard seat 9
1.7 Seat length adjustment
Function seat (standard and comfort upholstery) 10
1.8 Leg support angle adjustment
Function seat 11
1.9 Leg support length adjustment
Standard and function seats 12
1.10 Leg support footrest angle adjustment
Function seat 13
1.11 Leg support footrest length adjustment
Standard and function seats 14
1.12 Interface instructions 15
1.13 Adjusting the chassis springing and damping 16
1.13.1 General information 16
1.13.2 Adjusting the rear springing 17
1.14 Setting the direction indicators 18
1.15 Setting the seat position
Function seat 19
1.16 Setting the seat position
Standard seat 20
1.17 Fitting mudguards (optional extra) 21
1.17.1 Mudguards for the steering wheels 21
1.17.2 Mudguards for the powered wheels 22
1.17.3 Fitting rear reflectors 22
1.18 Control unit length adjustment 23
2 Settings on the control unit
2.1 General information regarding
programming mode 24
2.2 Driving programs 24
2.3 Changeable parameters 25
2.4 Activating service mode 28
2.5 Selection of the parameter settings
Indoor/Outdoor 29
2.6 Changing the parameters 30
2.7 Reverting to factory parameters settings 31
2.8 Parameter table 32
2.8.1 adventure Version 6 km/h 32
2.8.2 adventure Version 10 km/h 33
2.8.3 adventure Version 12 km/h 34
2.9 Fault detection / fault analysis codes 35
2.10 Fault indications on the display 35