User Manual - John Preston
User Manual - John Preston
User Manual - John Preston
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Drive symbol flashes<br />
Temperature symbol lit up<br />
Exclamation mark lit up<br />
Letter »L« flashes<br />
“Left“ drive operating<br />
temperature switch-off<br />
Drive overheating deactivates<br />
temperature!<br />
Allow system to<br />
cool! (Cooling period<br />
depends on ambient<br />
temperature!)<br />
39<br />
Code L3<br />
Drive symbol flashes<br />
Temperature symbol lit up<br />
Exclamation mark lit up<br />
Letter »R« flashes<br />
“Right“ drive operating<br />
temperature switch-off<br />
Drive overheating deactivates<br />
temperature!<br />
Allow system to<br />
cool! (Cooling period<br />
depends on ambient<br />
temperature!)<br />
Code R3<br />
Temperature symbol flashes<br />
Exclamation mark flashes<br />
Battery capacity display<br />
illuminates<br />
“Left“ drive operating<br />
temperature warning<br />
Drive overheating<br />
warning!<br />
Reduce load, otherwise<br />
temp. system shutdown<br />
with error L3/R3!<br />
Code L<br />
Temperature symbol flashes<br />
Exclamation mark flashes<br />
Battery capacity display<br />
illuminates<br />
“Right“ drive operating<br />
temperature warning<br />
Drive overheating<br />
warning!<br />
Reduce load, otherwise<br />
temp. system shutdown<br />
with error L3/R3!<br />
Code R<br />
Drive symbol flashes<br />
Exclamation mark<br />
lit up<br />
Letter »L« flashes<br />
Code L5<br />
Wheel code/“Left“<br />
electronic drive error<br />
Wrong electronics in<br />
drive (e.g. 6 km/h PCB<br />
in 12 km/h machine) or<br />
wrong drive code!<br />
1. Replace electronics<br />
2. Edit drive code (only<br />
possible in alber works)<br />
Drive symbol flashes<br />
Exclamation mark<br />
lit up<br />
Letter »R« flashes<br />
Code R5<br />
Wheel code/“Right“<br />
electronic drive error<br />
Wrong electronics in<br />
drive (e.g. 6 km/h PCB<br />
in 12 km/h machine) or<br />
wrong drive code!<br />
1. Replace electronics<br />
2. Edit drive code (only<br />
possible in alber works