Multidiscipline support systeM type MultiGrid™ - JT Day Pty Ltd

Multidiscipline Support System
Type MultiGrid
Being first is good, being smart is better, being both is Simply the Best!
1

PRODUCT PORTFOLIO
Oglaend System offer a broad range of cable support systems for all applications, e.g.
cabIe Iadders, cable trays, junction box racks, tubing clamps, cable cleats,
heating cables, control systems etc.
If you need further information,
please do not hesitate to contact us!
Company presentation
Download our latest version of product catalogues from: www.oglaend-system.com
2

www.oglaend-system.com
Discipline guide:
MultiGrid Support System
Electro / Instrument / Telecom
HVAC
Piping
Symbols for Material types:
PG = Pre galvanized steel 20 my zink
HDG = Hot Dip Galvanized NS/ISO 1461*
SS = Stainless Steel AISI 316L**
AL = Aluminium 5052 H22/H32
*) Steel quality for HDG:
Steel grade EN 10130 Grade DC01
**) Steel quality for SS: EN 1.4404
Other material qualities on request.
SYMBOLS FOR SCREWS:
2(4)
M10x25
2
M10x55
1
M10x20
2(4)
M6x12
6
4x32
This symbol shows type
of screw, the number
needed and name.
For order no.–
see page 81.
Symbol examples:
Expansion bolts
2 pcs. needed.
Type M10x55.
Locking screws
1 pcs. needed.
Type M10x20.
Hexagonal screws
Minimum 2 pcs. needed.
(4) May be used*.
Type M6x12.
Self tapping screw
6 pcs. needed.
Type 4x32.
Standard: Screws are included!
The number of screws and nuts before the
brackets are included when ordering the part.
(4) Screws in brackets are
NOT included!
The number in brackets represents the number
of screws that can be fitted to fix the part.
These must be ordered separately.
Screws NOT
Included!
SNI: Screws not included.
SNI
newS!
newS!
Contents:
––––––––––––––––––––––––––––––––––––––––
Catalogue Portfolio 2
––––––––––––––––––––––––––––––––––––––––
Explanation of symbols 3
–––––––––––––––––––––––––––––––––––––––––––––––––––––
MultiGrid MultiGrid: Multidiscipline support introduction 4
–––––––––––––––––––––––––––––––––––––––––––––––––––––
Starters Starting Brackets (Welded and bolted)
–––––––––––––––––––––––––––––––––––––––––––––––––––––
12
Channels Mekano Channels 14
––––––––––––––––––––––––––––––––––––––––
Mekano Channels Data Sheets 18
–––––––––––––––––––––––––––––––––––––––––––––––––––––
E, I & T MultiGrid: Electro, Instrumentation & Telecom 56
––––––––––––––––––––––––––––––––––––––––
Angle Brackets and Various Items
Brackets for Cable Trays
Accessories Earth “Jumpers” and Lug
Splice Connectors for Channels 66
––––––––––––––––––––––––––––––––––––––––
Beam Clamps 68
––––––––––––––––––––––––––––––––––––––––
Instrument and other E, I & T products
ETIN tubing clamps, SmartCleat, Lighting,
Rack, Instrument stands and equipment plates
Ask for our special catalogues: 69
–––––––––––––––––––––––––––––––––––––––––––––––––––––
HVAC MultiGrid: HVAC 70
–––––––––––––––––––––––––––––––––––––––––––––––––––––
Piping MultiGrid: Pipe Support Standard Details 72
–––––––––––––––––––––––––––––––––––––––––––––––––––––
for Ships MultiGrid: Ships 75
–––––––––––––––––––––––––––––––––––––––––––––––––––––
for Concrete Multidiscipline for Concrete Constructions
Brackets and Channels solutions 76
–––––––––––––––––––––––––––––––––––––––––––––––––––––
in FRP Multidiscipline support system in FRP 78
–––––––––––––––––––––––––––––––––––––––––––––––––––––
Miscellaneous Products
UNO, U-Bolts, Safety-Hooks, El-Insulation details 79
––––––––––––––––––––––––––––––––––––––––
Self-Locking Bolt Sets Bolts & Fixing items 80
––––––––––––––––––––––––––––––––––––––––
Other Perforated Channels 82
–––––––––––––––––––––––––––––––––––––––––––––––––––––
Sales Locations 83
––––––––––––––––––––––––––––––––––––––––
Patents and design applications
Many of Oglaend System´s products are patented or
protected by design applications.
New Mekano Channels
Low weight, full system compatibility and
considerable torsion strength.
Material thickness from 1,5-3 mm.
Surface treatment
Standard: Brushed and polished.
On request: Pickled and passivated.
Study the new patent pending design on page 14.
Subject to minor changes
without notice. Check our
website for latest issues.
3

MultiGrid
Multidiscipline Support
MultiGrid is an integrated support system
for all main disciplines such as electrical,
instrumentation, telecom, HVAC and piping.
A key feature is the compatible components
which gives you maximum support flexibility
across the disciplines. This offers you the
freedom to use the system for one or two
disciplines, or three or four if you like.
The system provides a bolted solution
for supporting all disciplines.
MultiGrid
MultiGrid is the concept name of the entire multidiscipline support
system. The MultiGrid concept covers all welded and
bolted starter brackets, all channels and frames.
Mekano
Mekano is the concept name of all channels and fixing accessories
for MultiGrid. The Mekano channels are multidiscipline
and used for creating support and support frames. All Mekano
parts are marked in red in the following system drawings.
Discipline Parts
Discipline guide
MultiGrid Support System for:
Electro / Instrument / Telecom
HVAC
Piping
Discipline parts for Electro/Instrument/ Telecom are marked
ingreen, HVAC are marked in blue and Piping parts are marked
in yellow.
4

Our value proposition:
Design & Engineering
MultiGrid is available in Aveva’s PDMS format along with
our cable ladders and trays. MultiGrid will be available in
Intergraph’s Smart Plant 3D in 2012. See page 74.
Modeling using MultiGrid in our PDMS or SP3D catalogues
in the detailed design stage can generate
Total System Cost savings of up to 35% in
an EPC contract.
Reduce Total System Cost
MultiGrid is designed to optimize all factors
contributing to the Total System Cost of a
construction project. The Total System Cost can
be reduced by up to 30 percent.
Cross section data from:
MultiGrid included:
Material Qualities
Supplied in both
Stainless Steel
AISI 316L and
Hot Dip Galvanized
Carbon Steel.
Other material qualities
can be made available
on request.
Quick Installation
Our patented system and product solutions make the
installation work very simple and quick.
In co-operation with your engineering and installation team
we can tailor an installation manual that will secure the
quality and the time schedule of the installation.
Installation time reduction up to 60 percent.
Less Weight & Volume
The combination of an integrated support system for all
disciplines and patented component solutions generates
approximately 30 percent weight savings and
15 percent volume savings.
Improved Safety Performance
Our system and product solutions reduces the installation
time significantly through the constuction phase
of an EPC contract. Fewer manhours on site
minimize the safety risk.
Long Life & Integrity
A key feature of MultiGrid is the compatibility of the
components across the disciplines.
The compatibility and flexibility of this system has been the
same for over 30 years. This makes your future investment
secure and guarantees that modifications will be straight
forward.
MultiGrid is compatible with our FRP product line.
5

MultiGrid Support System
The idea behind MultiGrid is that welding
brackets are welded in a square pattern
(e.g. 1200 x 600 cm).
These are welded early in the
construction phase, and later sandblasted
and painted along
with the steel structure.
The broad range of starter brackets and
channels provide excellent support for any
discipline.
TW!
The utmost use of MultiGrid
MultiGrid delivers modification flexiblity,
and eliminates need for hot work. No shut
down required.
1 2
Start by welding starter brackets in a grid
pattern before painting the main structure.
For increased flexibility a horizontal Mekano
channel can be bolted to the starters.
MultiGrid bolted support for the future
No welding
No sand blasting
No painting
6

Provide lowest possible
Total System Cost
The broad range of brackets in the MultiGrid
system enable support for different
loads. The starters should always
be selected based on the load capacity
needed.
The grid pattern is decided through a dialogue
between the engineering experts.
All grid starters and Mekano channels are
fully compatible in order to provide flexibility
and deliver lowest possible
Total System Cost.
Above: Grid system and ”starters” welded & ready for area painting.
3 4
Vertical and horizontal Mekano channels
can be bolted to the starters to support
any discipline.
MultiGrid: Your flexible low weight support
system, safe and easy to install and flexible
in terms of future modifications.
Whatever support you decide, the solution may be preassembled
before installation.
7

How to get started:
Choose starters according to the required load capacity
Increased load capacity
HOT WORK
FOR HOT WORK
Welded Starters
See full range page 10-11
Page 12
We offer
welded starters
for whatever
support solution
you need!
8
The Mekano Support Channels See the full range page 14-17
Increased load capacity
Choose channels according to the required load capacity

Choose starters according to the required load capacity
Increased load capacity
FOR COLD WORK
Bolted Starters
See full range page 12-13
COLD WORK
Page 14
We offer
bolted starters
for whatever
support solution
you need!
The FRP Support Channels
combined with FRP or Steel Starters
give required load capacity.
See page 78.
Increased load capacity
9

Welded Starters – Typical support for Electrical, Instrumentation & HVAC
Type states length and recommended channel
105 105
FOR HOT WORK
S-M WB-125-CH50-1*
125
40
Used with Mekano
Channel Type
S-M CH50-1
S-M WB-200-CH50-1
Type T Weight Art. no. Art. no.
mm kg CS** SS
S-M WB-125-CH50-1* 6 0.3 1302511 1371695
S-M WB-200-CH50-1 6 0.5 1302512 1371696
*) Welding Brackets L = 125 mm ordinary not in stock
**) CS steel quality: S235JR
200
40
50-1
105 105
200
300
Used with Mekano Channel Type
S-M CH100-2T2
S-M CH100-2T3
WB-ST-200 WB-ST-300
100-2T2 100-2T3
Type T Weight Art. no. Art. no.
mm kg CS* SS
S-M WB-200-CH100-2 5 1.5 88619 88618
S-M WB-300-CH100-2 5 2.3 70169 70168
*) CS steel quality: S355J2-Y05
S-M WB-200-CH100-1
90 90 90
125
200
300
S-M WB-125-CH100-1*
S-M WB-200-CH100-1
S-M WB-300-CH100-1
Type T Weight Art. no. Art. no.
mm kg CS* SS
S-M WB-125-CH100-1 6 0.5 1302507 1371691
S-M WB-200-CH100-1 6 0.8 1302508 1371692
S-M WB-300-CH100-1 6 1.2 1302509 1371693
S-M CH100-1
Used with Mekano
Channel Type
S-M CH100-1
S-M CH100-2T
*) CS steel quality: S355J2-Y05
100-1 100-2T
S-M WB-200-CH50-2
S-M CH50-2T
S-M WB-200-CH100-2
S-M CH100-2T
114 109793 91 93
120
175
150
S-M WB-ST-200-CH50-2
S-M CH50-2
S-M WB-CH100-3 S-M WB-ST-CH100-3
Type T Weight Art. no. Art. no.
mm kg CS* SS
S-M WB-CH100-3 4 1.3 1372516 1372517
S-M WB-ST-CH100-3 4 1.2 1372514 1372515
10
S-M WB-CH100-3
S-M CH100-2T
Used with Mekano
Channel Type
S-M CH100-3
*) CS steel quality: S235JR
100-3

Welded Starters – Typical for Piping & heavy loads
Type states length and recommended channel
FOR HOT WORK
S-M WB-125-CH50-2
125
S-M WB-200-CH50-2
S-M WB-300-CH50-2
S-M WB-ST-200-CH50-2
Type T Weight Art. no. Art. no.
mm kg CS* SS
S-M WB-125-CH50-2 6 0.5 82210 82211
S-M WB-200-CH50-2 6 0.9 1302514 1371698
S-M WB-300-CH50-2 6 1.3 1302599 1371699
S-M WB-ST-200-CH50-2 6 0.9 84287 84283
200
Used with Mekano
Channel Type
S-M CH50-2
S-M CH60-2
S-M CH50-2T 50-2 60-2 50-2T
*) CS steel quality: S355J2-Y05
61 61 61 61 61 61 61 61
300
170
250
240
113 113 150 150
S-M WB-CH100-4
8
200
240
S-M WB-PL-CH100-4
S-M WB-FP-CH100-4
Type T Weight Art. no. Art. no.
mm kg CS SS
S-M WB-CH100-4 6 3 1372606 1372601
S-M WB-PL-CH100-4 6 5.5 N/A 1372552
S-M WB-FP-CH100-4 6 11 N/A 1372602
Used with Mekano
Channel Type
S-M CH100-4
100-4
200
6
250
240
200
200
*) CS steel quality: S355J2-Y05
CS brackets are uncoated and not available in HDG.
S-M WB-200-CH50-2
S-M CH60-2
S-M WB-ST-200-CH100-3
S-M CH100-3
S-M WB-CH100-4
S-M CH100-4
11

FOR COLD WORK
Bolted Starters – Typical support for Electrical, Instrument & HVAC
Type states recommended channel
Bolted solutions for concrete,
see page 77.
160
Used with Mekano
Channel Type
S-M CH100-1
S-M BS-CH100-1
105
S-M CH100-2T
100-1 100-2T
Type T Weight Art. # Art. no.
mm HDG SS
S-M BS-CH100-1 3 1.2 61092 1371707
S-M BC-ST-HD
S-M CH100-3
76
110
M12 bolts
S-M BS-CH100-1
S-M CH100-1
S-M BC-240
S-M CH50-2T
S-M BS-CH100-4
S-M CH100-2T
See page 68 for
further details
S-M BC-FC
(x2)
M12 bolts
200 120 200 150 200 200
8
8
8
240
240
240
172
150
S-M BC-ST-HD S-M BS-CH100-3
Type T Weight Art. # Art. no.
mm kg HDG SS
S-M BC-ST-HD 4 6 N/A 86887
S-M BS-CH100-3 4 3,6 1372493 1372492
90
Used with Mekano
Channel Type
S-M CH100-3
S-M CH100-4
100-3 100-4
S-M BC-160
S-M BC-300
Type T Weight Art. no. Art. no.
mm kg HDG SS
S-M BC-FC 4 0.37 85196 85197
S-M BC-160 3 1.15 85621 85622
S-M BC-300 3 1.7 85623 85624
Used with Mekano
Channel Type
S-M CH50-1
S-M CH50-2
S-M CH50-2T1,5
S-M CH50-2T2
12
50-1 50-2 50-2T
113
S-M BS-CH100-4-B
S-M BS-CH100-4-C
S-M BS-CH100-4
Type T Weight Art. # Art. no.
mm kg HDG* SS
S-M BS-CH100-4-C 6 5 1372522 1372523
S-M BS-CH100-4-B 6 5.3 1372554 1372555
S-M BS-CH100-4 6 6 1372603 1372550
Used with Mekano
Channel Type
S-M CH100-4 100-4
*) CS steel quality:
S355J2-Y05

FOR COLD WORK
Bolted Starters – Typical for Piping & heavy loads
Type states recommended channel
S-M BC-CH100-3
S-M BS-CH60-2
96
Type T Weight Art. # Art. no.
mm HDG SS
S-M BS-CH60-2 4 2.1 1371424 1371423
103
Used with Mekano
Channel Type
S-M CH60-2
S-M CH50-2T1.5
S-M CH50-2T2
S-M CH100-2T3
S-M CH100-2T3 60-2 50-2T 100-2T
109.5
500
S-M BT-CH100-3
S-M MG-CA
See page 68
for further details
Type T Weight Art. no. Art. no.
mm HDG SS
S-M BC-CH100-3 4 2 1372490 1372491
S-M BT-CH100-3 4 2 1372494 1372495
S-M MG-CA 3 80926 1372497
Used with Mekano
Channel Type
S-M CH100-2T2
S-M CH100-2T3
S-M CH100-3
95
100-2T2 100-2T3 100-3
415
M16 bolts
120
S-M BC-MS-CH100-4
100
400
(See Page 63 for details.)
Fit-range HE240-1000A/B
Type T Weight Art. # Art. no.
mm kg HDG SS
S-M BC-MS-CH100-4 5 16 1372519 1372520
Used with Mekano
Channel Type
S-M CH100-4
100-4
S-M BS-CH60-2
S-M CH60-2
S-M BC-CH100-3
S-M CH100-3
S-M BC-MS-CH100-4
S-M CH100-4
13

Support Channels for Electrical, Instrument & HVAC
Electro / Instrument / Telecom
HVAC
Piping
Increased load capacity
Mekano 50-1 Mekano 50-2 Mekano 100-1
Single and Double
Single and Double
Mekano 50-2T
Mekano 100-2T
new!
S-M CH50-1
S-M CH50-2
S-M CH100-1
S-M CH50-2T S-M CH100-2T
Data:
Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight
Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m
S-M CH50-1-3 1.5 1.3 S-M CH50-2-3 1.5 1.7 S-M CH100-1-3 1.5 1.7 S-M CH50-2T1,5-3 1.5 1.4
S-M CH50-2T2-3 2.0 1.8
Ordering list:
S-M CH100-2T2-3 2.0 3.8
Type states width, material
Type states width and length Type states width and length Type states width and length thickness and length
Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no.
Type HDG SS Type HDG SS Type HDG SS Type HDG SS
S-M CH50-1-3 1371684 1371687 S-M CH50-2-3 1302506 1371689 S-M CH100-1-3 1371649 1371685 S-M CH50-2T1,5-3 1372186 1372181*
S-M CH50-2T2-3 1372187 1372182*
S-M CH100-2T2-3 1372189 1372184*
*) The triangular SS channels are supplied non pickled and passivated as standard.
Article numbers for pickled and passivated are: 1372181P, 1372182P, 1372184P.
Calculation basis Channel material thickness (mm)
Channel Type: CH50-1 (1.5) CH50-2 CH100-1 (1.5) CH100-1 (1.5) CH50-2T CH50-2T CH100-2T
Double (1.5mm) Single Double (1.5mm) (2mm) (2mm)
A E 305 215 214 427 222 222 461
I TE 237 169 160 319 33 853 41 015 273 205
I XE 127 000 81 598 31 4961 629 922 35 062 71 015 521 996
I YE 44 790 81 598 11 960 40 000 55 062 71 015 521 996
W XP 5 082 2 663 6 299 12 599 1 682 2 168 7 844
W YP 1 991 2 663 762 1 850 1 682 2 168 7 844
C TP 158 113 106 213 2 492 3 101 12 217
DW = Dead Weight
KN = Kilo Newton
14
A E - Effective cross-section area (mm 2 )
I TE - Effective moment of inertia, torsion (mm 4 )
I XE - Effective moment of inertia, bending about X-axis (mm 4 )
I YE - Effective moment of inertia, bending about Y-axis (mm 4 )
W XP - Moment of resistance, bending about X-axis, perforated (mm 3 )
W YP - Moment of resistance, bending about Y-axis, perforated (mm 3 )
C TP - Moment of resistance, torsion, perforated (mm 3 )

Support Channels for Piping & heavy loads
Electro / Instrument / Telecom
HVAC
Piping
Increased load capacity
Mekano 50-2T
Mekano 100-2T
Mekano 60-2
Double and
Single Perforated
Mekano 100-3
Mekano 100-4
new!
Thickness
2,5mm
3mm
S-M CH50-2T S-M CH100-2T
S-M CH60-2*
*) Made to order only
S-M CH100-3*
*) Made to order only
S-M CH100-4-3
S-M CH100-4-5
Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight
Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m
S-M CH50-2T2,5-3 2.5 2.4 S-M CH60-2-A-3 6 5.3 S-M CH100-3-2.5 2.5 5.7 S-M CH100-4-3-6 3 8.5
S-M CH100-2T3-3 3.0 6.0 S-M CH100-4-5-6 5 13.7
Type states width, material Type states width, material Type states width, material Type states width, material
thickness and length thickness and length thickness and length thickness and length
Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no.
Type HDG S Type HDG SS Type HDG SS Type HDG SS
S-M CH50-2T2,5-3 1372188 1372183* Double perforated S-M CH100-3-0.5 80912 80267 3mm thickness
S-M CH100-2T3-3 1372190 1372185* S-M CH60-2-A-3 1371432 1371430 S-M CH100-3-1 80913 80268 S-M CH100-4-3-6 1372525 1372526
Single perforated S-M CH100-3-1.25 80914 80460 5mm thickness
S-M CH60-2-B-3 1371431 1371429 S-M CH100-3-2.5 1372504 1372505 S-M CH100-4-5-6 1372530 1372531
*) The triangular SS channels are supplied non pickled and passivated as standard.
Article numbers for pickled and passivated are: 1372181P, 1372182P, 1372184P.
CH50-2T CH100-2T CH60-2 CH100-3 CH100-4 CH100-4
(2.5mm) (3mm) (6mm) (2.5mm) (3mm) (5mm)
240 722 633 777 1023 1 642
54 474 449 902 7 524 1 619 2 516 957 3 972 831
88 245 789 750 220 797 1 073 537 1 596 639 2 428 086
88 245 789 750 220 797 1 347 007 1 596 639 2 428 086
26 278 11 792 4 902 17 267 28 016 42 284
26 278 11 792 4 902 23 961 28 016 42 284
4 171 19 343 1 121 578 44 467 70 680
Channels are included in Staad.Pro (contact us for library)
by Bentley
by EDR
15

Support Channels for Electrical, Instrument & HVAC
Mekano 50-1 Standard length = 3 m.
Mekano 100-1
Other lengths as per your
specific material take off
requirement (MTO)
can be provided as specialty
products.
T: 1.5 mm T: 1.5 mm
Art. no. Art. no.
Art. no. Art. no.
Type HDG SS
Type HDG SS
S-M CH50-1-3 1371684 1371687
S-M CH100-1-3 1371649 1371685
Mekano 100-2T Mekano 50-2T
Mekano 50-2
new!
new!
T: 2 mm
Art. no. Art. no.
Type HDG SS
S-M CH100-2T2-3 1372189 1372184
T: 1.5 & 2 mm
Art. no. Art. no.
Type HDG SS
S-M CH50-2T1,5-3 1372186 1372181
S-M CH50-2T2-3 1372187 1372182
T: 1.5 mm
Art. no. Art. no.
Type HDG SS
S-M CH50-2-3 1302506 1371689
16

Support Channels for Piping & heavy loads
Mekano 50-2T Mekano 60-2*
Mekano 100-2T
*) Made to order only
new!
new!
T: 2.5 mm
Art. no. Art. no.
Type HDG S
S-M CH50-2T2,5-3 1372188 1372183
T: 6 mm A B
Art. no. Art. no.
Type HDG SS
S-M CH60-2-A-3 1371432 1371430
S-M CH60-2-B-3 1371431 1371429
T: 3 mm
Art. no. Art. no.
Type HDG SS
S-M CH100-2T3-3 1372190 1372185
Mekano 100-3*
*) Made to order only
Mekano 100-4
T: 2.5 mm
Art. no. Art. no.
Type HDG SS
S-M CH100-3-0.5 80912 80267
S-M CH100-3-1 80913 80268
S-M CH100-3-1.25 80914 80460
S-M CH100-3-2.5 1372504 1372505
T: 3 & 5 mm
Art. no. Art. no.
Type HDG SS
S-M CH100-4-3-6 1372525 1372526
S-M CH100-4-5-6 1372530 1372531
17

A guide to standard U- , L- , T- and Cantilever support
Choose starters and Channels according to the required load capacity
Using Channels:
Mekano 50-2 Vertical
Mekano 50-2 Horizontal
Mekano 100-1 Horizontal
For complete spesifications and ordering list see data sheet page
U: 01
U: 02
CH50-2-1,5 CH50-2T2
p 19 p 20
CH100-1
p 19 up to: p 55
Mekano 50-2T-1,5 Vertical
Mekano 50-2T-1,5 Horizontal
Mekano 100-1 Horizontal
U: 03
CH50-2T1,5
U: 05
CH50-2T1,5
C: 01
CH50-2T1,5
p 21
p 23
CH100-1
p 41
Mekano 50-2T2 Vertical
Mekano 50-2T2 Horizontal
Mekano 100-1 Horizontal
U: 04
CH50-2T2
p 22
U: 06
CH50-2T2
p 26
CH100-1
U: 07
CH50-2T1,5
p 24
CH100-1
U: 08
CH50-2T1,5
p 25
CH100-1
C: 02
CH50-2T2
p 42
Mekano 100-2T-2 Vertical
Mekano 100-2T-2 Horizontal
U: 09
CH100-2T2
U: 10
CH100-2T2
U: 11
CH100-2T2
L: 01
CH100-2T2
C: 03
CH100-2T2
T: 01
CH100-2T2
p 27
p 28
p 29
p 36
p 43
p 50
Mekano 50-2T2,5 Vertical
Mekano 50-2T2,5 Horizontal
U: 12
CH50-2T2,5
C: 04
CH50-2T2,5
p 30
p 44
Mekano 60-2 Vertical
Mekano 60-2 Horizontal
U: 13
CH60-2
C: 05
CH60-2
T: 02
CH60-2
p 31
p 45
p 51
Mekano 100-2T3 Vertical
Mekano 100-2T3 Horizontal
U: 15
CH100-2T3
L: 03
CH100-2T3
C: 07
CH100-2T3
T: 04
CH100-2T3
p 33
p 38
p 47
p 53
Mekano 100-3 Vertical
Mekano 100-3 Horizontal
U: 14 L: 02
CH100-3-2,5
CH100-3-2,5
C: 06
CH100-3-2,5
T: 03
CH100-3
p 32
p 37
p 46
p 52
Mekano 100-4 Vertical
Mekano 100-4 Horizontal
U: 16
CH100-4-3
U: 17
CH100-4-5
p 34 p 35
L: 04
CH100-4-3
C: 08
CH100-4-3
L: 05
CH100-4-5 C: 09
p 30 p 40
CH100-4-5
p 48 p 49
T: 05
CH100-4-3
p 54 p 55
T: 06
CH100-4-5
88
18

U-SUPPORT: CH 50-2 -1,5mm
MG-U: 01
A)
S-M WB-200-CH50-2
Thickness
1.5 mm
Height
B)
C)
P y (KN)
D)
Width
P x (KN)
Items list:
Function Type Thickness (mm) Weight (kg) Art # HDG Art # SS # of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2 (*kg/m) 1,5 1,7* 1302506 1371689 1
C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2 (vertical) & CH 50-2 (horizontal)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 5.5 1.8
1000 500 3.2 1.1
1000 750 2.3 0.8
1000 1000 1.8 0.6
1000 1250 1.5 0.5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH50-2-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
19

U-SUPPORT: CH 50-2-1,5mm & CH100-1-1,5mm MG-U: 02
A)
S-M WB-200-CH50-2
Thickness
1.5 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2(*kg/m) 1,5 1,7* 1302506 1371689 1
C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 12
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2 (v) & CH 100-1 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 13.4 4.5
1000 500 8.8 2.9
1000 750 6.4 2.1
1000 1000 4.4 1.5
1000 1250 4.2 1.4
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
20

U-SUPPORT: CH 50-2T-1,5mm
MG-U: 03
A)
S-M WB-200-CH50-2
Thickness
1.5 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* 1372186 1372181 1
C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 50-2T1,5 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 5.5 1.8
1000 500 3.2 1.1
1000 750 2.3 0.8
1000 1000 1.8 0.6
1000 1250 1.5 0.5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH50-2T-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
21

U-SUPPORT: CH 50-2T-2mm
MG-U: 04
A)
S-M WB-200-CH50-2
Thickness
2 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1
C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T2 (v) & CH 50-2T2 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 7.3 2.4
1000 500 4.7 1.6
1000 750 3.5 1.2
1000 1000 2.8 0.9
1000 1250 2 0.7
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH50-2T-2 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
22

U-SUPPORT: CH 50-2T-1,5mm & CH100-1-1,5mm MG-U: 05
A)
S-M WB-200-CH50-2
Thickness
1.5 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* 1372186 1372181 1
C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 12
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 13.4 4.5
1000 500 8.8 2.9
1000 750 6.4 2.1
1000 1000 4.4 1.5
1000 1250 4.2 1.4
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
23

U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 06
A)
S-M WB-200-CH50-2
Thickness
2 mm
Height
B)
P y (KN)
C)
D)
Thickness
1,5 mm
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1
C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 12
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 13,5 4,5
1000 500 9 3
1000 750 6,6 2,2
1000 1000 5,3 2,4
1000 1250 4,5 1,5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
24

U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 07
A)
H1
P y (KN)
Thickness
2 mm
S-M WB-200-CH50-2
Thickness
1,5 mm
Height
B)
C)
H1
P y (KN)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1
C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h)
Height(mm) H1 Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 13 4,3
1000 500 8,6 3,8
1000 750 6,2 2,0
1000 1000 4,2 1,4
1000 1250 4,0 1,3
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
25

U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 08
A)
H1
P y (KN)
Thickness
2 mm
Thickness
1,5 mm
S-M WB-200-CH50-2
B)
Height
H1
P y (KN)
C)
H1
P y (KN)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1
C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1(2)
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 20
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h)
Height(mm) H1 Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 12 4
1000 500 8 2,6
1000 750 6 2
1000 1000 4 1,3
1000 1250 3,5 1,5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
26

U-SUPPORT: CH100-2T-2mm MG-U: 09
A)
S-M WB-200-CH100-2
Thickness
2 mm
Height
B)
P y (KN)
C)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 2
B) Mekano Channel S-M CH100-2T2(*kg/m) 2 3,8* 1372189 1372184 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 22.5 7.5
1000 500 14.2 4.7
1000 750 10.5 3.5
1000 1000 8 2.7
1000 1250 7 2.3
1000 2000 4.7 1.5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
27

U-SUPPORT: CH100-2T-2mm MG-U: 10
A)
H1
Thickness
2 mm
P y (KN)
S-M WB-200-CH100-2
Height
B)
C)
H1
P y (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 2
B) Mekano Channel S-M CH100-2T2(*kg/m) 2 3,8* 1372189 1372184 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 24
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 21 7
1000 500 12,8 4,3
1000 750 9,4 3,4
1000 1000 7,4 2,4
1000 1250 6,2 2,1
1000 2000 4,0 1,3
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
28

U-SUPPORT: CH100-2T-2mm MG-U: 11
A)
H1
Thickness
2 mm
P y (KN)
S-M WB-200-CH100-2
Height
H1
P y (KN)
B)
C)
H1
P y (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 2
B) Mekano Channel S-M CH100-2T2(*kg/m) 2 3,8* 1372189 1372184 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 32
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 19,6 6,5
1000 500 12,0 4,0
1000 750 8,8 2,9
1000 1000 7,0 2,3
1000 1250 5,8 1,9
1000 2000 3,1 1,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
29

U-SUPPORT: CH 50-2T-2,5mm
MG-U: 12
A)
S-M WB-200-CH50-2
Thickness
2.5 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T2,5(*kg/m) 2,5 5,3* 1372188 1372183 1
C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T2,5 (v) & CH 50-2T2,5 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1000 250 8.5 3.8 1.1 10 3
1000 500 5 3.3 1 9 3
1000 750 3.6 2.5 0.8 8 3
1000 1000 2.8 2.2 0.66 5 3
1000 1250 2.4 1.8 0.54 4 2.5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation a P(y)=70% of capacity load is used to estimate max blast in x-direction.
• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
30

U-SUPPORT: CH 60-2-6mm
MG-U: 13
A)
S-M WB-200-CH50-2
Thickness
6 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1
C) Angle Bracket S-M AC CH60-2 4 1,7 1371436 1371435 4
D) Self Lock Boltset S-M LS-NU-M10x25 10 0,05 1371980 1371437 22
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 60-2(v) & CH 60-2(h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1000 250 15.5 4.6 1.38 8 7
1000 500 9 4.4 1.32 7 6
1000 750 6.5 3.8 1.14 7 6
1000 1000 5 3.3 0.99 5 6
1000 1250 4.2 2.8 0.69 3 6
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation r=450N/mm².
31

U-SUPPORT: CH 100-3-2,5mm
MG-U: 14
A)
S-M WB-ST-CH100-3
Thickness
2,5 mm
Height
B)
P y (KN)
C)
D)
P x (KN)
E)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-ST-CH100-3 4 1,2 1372514** 1372515 2
B) Mekano Channel S-M CH100-3(*kg/m) 2,5 5,7* 1372504 1372505 1
C) Splice Connector L S-M SC-L-CH100-3 4 0,2 1372510 1372511 4
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 44
E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 2
**) S-M WB-ST-CH100-3 is delivered in carbon steel quality.
Load Capacity: Mekano Channel 100-3 & CH100-3
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1000 250 20.4 11 3.3 12 12
1000 500 18 11.4 3.5 11 12
1000 750 13.2 9.8 2.5 11 12
1000 1000 10.8 8.1 2.4 10 12
1000 1250 9 6.7 2.0 9 11
1000 2000 7 4.2 1.3 4 10
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation r=450N/mm².
32

U-SUPPORT: CH 100-2T-3mm
MG-U: 15
A)
S-M WB-200-CH100-2
Thickness
3 mm
Height
B)
P y (KN)
C)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 2
B) Mekano Channel S-M CH100-2T3(*kg/m) 3 6* 1372190 1372185 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-2T3 & CH100-2T3
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1000 250 30 13.1 4.0 12 14
1000 500 20.3 12.5 3.8 14 15
1000 750 15.2 11.1 3.3 14 14
1000 1000 12.4 9 2.7 13 14
1000 1250 10.4 7.8 2.3 12 13
1000 2000 7.0 4.5 1.35 11 12
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation r=450N/mm².
33

U-SUPPORT: CH 100-4-3mm
MG-U: 18
A)
Height
Thickness
3 mm
S-M WB-CH100-4
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2
B) Mekano Channel S-M CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1
C) Splice Connector L S-M SC-L-CH100-4 4 0,4 1372539 1372540 4
D) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 32
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-4-3 & CH100-4-3
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1000 250 44 16 4.8 20 20
1000 500 36 20 6 25 25
1000 750 30 20 6 30 30
1000 1000 26 18 5.4 30 30
1000 1250 22 16 4.8 28 28
1000 2000 15 9 2.7 15 21
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation r=450N/mm².
34

U-SUPPORT: CH 100-4-5mm
MG-U: 19
A)
Height
Thickness
5 mm
S-M WB-CH100-4
B)
P y (KN)
C)
D)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2
B) Mekano Channel S-M CH100-4-5(*kg/m) 5 13,7* 1372530 1372531 1
C) Splice Connector L S-M SC-L-CH100-6 6 0,4 1372539 1372540 4
D) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 32
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-4-5 & CH100-4-5
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1000 250 69 26 7.8 45 45
1000 500 57 32 9.6 50 45
1000 750 47 31 9.3 55 45
1000 1000 39 28 8.4 50 45
1000 1250 34 25 7.5 49 43
1000 2000 23 18 5.4 38 37
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation r=450N/mm².
35

L-SUPPORT: CH100-2T-2mm & CH100-2T-2mm MG-L: 01
A)
S-M WB-200-CH100-2
Thickness
2 mm
Height
B)
P y (KN)
C)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 2
B) Mekano Channel S-M CH1002T2(*kg/m) 2 3,8* 1372189 1372184 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8
**) S-M WB-ST-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Capacity P x (KN)
600 200 6,7 2,2
600 400 3,4 1,15
600 600 2,3 1,6
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
36

L-SUPPORT: CH 100-3-2,5mm
MG-L: 02
A)
S-M WB-ST-CH100-3
Thickness
2,5 mm
Height
B)
P y (KN)
C)
D)
E)
Width
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-ST-CH100-3 4 1,2 1372514** 1372515 2
B) Mekano Channel S-M CH100-3(*kg/m) 2,5 5,7* 1372504 1372505 1
C) Splice Connector L S-M SC-L-CH100-3 4 0,2 1372510 1372511 4
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 44
E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 1
**) S-M WB-ST-CH100-3 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
600 200 10,8 4,0 1,6 12 6
600 400 6 2,7 0,9 8 5,4
600 600 3,3 1,7 0,6 5 5,4
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
37

L-SUPPORT: CH100-2T-3mm MG-L: 03
A)
S-M WB-200-CH100-2
Thickness
3 mm
Height
B)
P y (KN)
C)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 2
B) Mekano Channel S-M CH100-2T3(*kg/m) 3 6* 1372190 1372185 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH100-2T3 (v) & CH100-2T3 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
600 200 10 4,1 1,3 6 7
600 400 5 2,6 0,85 4 6
600 600 3,5 1,7 0,55 3 6
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
38

L-SUPPORT: CH 100-4-3mm
MG-L: 04
A)
Height
Thickness
3 mm
S-M WB-CH100-4
B)
P y (KN)
C)
D)
P x (KN)
E)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2
B) Mekano Channel S-M-CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1
C) Splice Connector L S-M SC-L-CH100-4 4 0,4 1372539 1372540 2
D) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 16
E) End Protection A-CH100-4 EP Plastic: PS60018 1
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-4-3 (v) & CH100-4-3 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
600 200 22 9 3 20 15
600 400 12 6 2 10 14
600 600 7 3,5 1,1 7 14
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
39

L-SUPPORT: CH 100-4-5mm
MG-L: 05
A)
Height
Thickness
3 mm
S-M WB-CH100-4
B)
P y (KN)
C)
D)
P x (KN)
E)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2
B) Mekano Channel S-M CH100-4-5(*kg/m) 3 13,7* 1372530 1372531 1
C) Splice Connector L S-M SC-L-CH100-4 4 0,4 1372539 1372540 4
D) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 16
E) End Protection A-CH100-4 EP Plastic: PS60018 1
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-4-5 (v) & CH100-4-5 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
600 200 34 14 4,5 25 23
600 400 17 8 2,5 14 22
600 600 10,5 5,4 1,5 11 22
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
40

Cantilever SUPPORT: CH 50-2T-1,5mm
MG-C: 01
S-M WB-200-CH50-2
A)
P y (KN)
B)
C)
Width
Thickness
1.5 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T(*kg/m) 1,5 1,4* 1372186 1372181 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T1,5
Lenght(mm) Capacity DW P y (KN) Piping P x (KN)
200 1,5 1
400 0,8 0,6
600 0,5 0,2
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
41

Cantilever SUPPORT: CH 50-2T-2mm
MG-C: 02
S-M WB-200-CH50-2
A)
P y (KN)
B)
C)
Width
Thickness
1.5 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,7* 1372187 1372182 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2T2
Lenght(mm) Capacity DW P y (KN) Piping P x (KN)
200 2,0 0,65
400 1,0 0,35
600 0,7 0,21
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
42

Cantilever SUPPORT: CH100-2T-2mm
MG-C: 03
S-M WB-200-CH100-2
A)
P y (KN)
B)
C)
Width
Thickness
2 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-ST-200-CH100-2 5 1,6 88619** 88618 1
B) Mekano Channel S-M CH100-2T2(*kg/m) 2 3,8* 1372189 1372184 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-2T2
Lenght(mm) Capacity DW P y (KN) Piping P x (KN)
200 7,0 2,3
400 3,6 1,2
600 2,3 0,7
800 1,8 0,6
1000 1,4 0,5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
43

Cantilever SUPPORT: CH50-2T-2,5mm
MG-C: 04
S-M WB-200-CH50-2
A)
P y (KN)
B)
P x (KN)
C)
Width
Thickness
2.5 mm
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1
B) Mekano Channel S-M CH50-2T2,5(*kg/m) 2,5 5,3* 1372188 1372183 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH50-2T2,5
Lenght(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 2,4 1,9 0,6 5,5 10,0
400 1,2 0,9 0,3 2,5 10,0
600 0,8 0,6 0,2 1,8 10,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
44

Cantilever SUPPORT: CH60-2-6mm
MG-C: 05
S-M WB-200-CH50-2
A)
P y (KN)
B)
C)
Width
Thickness
6 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 10
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH60-2
Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 4,4 3,4 1,1 10,5 10,0
400 2,2 1,7 0,6 5,5 10,0
600 1,5 1,1 0,4 3,5 10,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
45

Cantilever SUPPORT: CH100-3-2,5mm
MG-C: 06
S-M WB-ST-CH100-3
A)
P y (KN)
B)
P x (KN)
C)
Width
Thickness
2,5 mm
D)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-ST-CH100-3 4 1,2 1372514** 1372515 1
B) Mekano Channel S-M CH100-3-2,5(*kg/m) 2,5 5,7* 1372504 1372505 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 10
D) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 1
**) S-M WB-ST-CH100-3 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-3-2,5
Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 12,0 9,0 3,0 30 15
400 6,0 4,2 1,6 15 15
600 4,3 3,2 1,0 10 15
800 3,3 2,7 0,8 7,5 15
1000 2,2 2,0 0,7 6 15
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
46

Cantilever SUPPORT: CH100-2T-3mm
MG-C: 07
S-M WB-200-CH100-2
A)
P y (KN)
B)
Thickness
3 mm
P x (KN)
C)
Width
Thickness
3 mm
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 1
B) Mekano Channel S-M CH100-2T3(*kg/m) 3 3,8* 1372190 1372185 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-2T3
Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 11,0 8,0 2,6 25,0 25,0
400 5,4 4,0 1,3 12,2 25,0
600 3,6 2,7 0,9 8,0 25,0
800 2,7 2,0 0,7 6,0 25,0
1000 2,1 1,6 0,6 5,0 25,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
47

Cantilever SUPPORT: CH100-4-3mm
MG-C: 08
S-M WB-CH100-4
A)
P y (KN)
B)
C)
Width
Thickness
3 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 6 3 1372606** 1372601 1
B) Mekano Channel S-M CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1
C) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 4
D) End Protection A-CH100-4 EP Plastic: PS60018 1
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-4-3
Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 11,0 8,0 2,6 25,0 25,0
400 5,4 4,0 1,3 12,2 25,0
600 3,6 2,7 0,9 8,0 25,0
800 2,7 2,0 0,7 6,0 25,0
1000 2,1 1,6 0,6 5,0 25,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
48

Cantilever SUPPORT: CH100-4-5mm
MG-C: 09
S-M WB-CH100-4
A)
P y (KN)
B)
C)
Width
Thickness
3 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 6 3 1372606** 1372601 1
B) Mekano Channel S-M CH100-4-5(*kg/m) 3 8,5* 1372530 1372531 1
C) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 4
D) End Protection A-CH100-4 EP Plastic: PS60018 1
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-4-5
Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 38,0 25,0 8,3 75,0 50,0
400 19,2 14,0 4,3 50,0 50,0
600 13,0 9,6 3,2 30,0 50,0
800 9,5 7,2 2,4 22,0 50,0
1000 7,6 5,8 1,8 18,0 50,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
49

T-SUPPORT: CH100-2T-2mm MG-T: 01
A)
S-M WB-200-CH100-2
Thickness
2 mm
B)
Height
P y (KN)
P y (KN)
C)
P x (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 1
B) Mekano Channel S-M CH100-2T2(*kg/m) 2 3,8* 1372189 1372184 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P x (KN)
600 200 3,10 1,0
600 400 2,30 0,7
600 600 1,60 0,5
600 800 1,20 0,4
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Please note that the capacity calculation for T-support is for even loading on both sides.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
50

T-SUPPORT: CH 60-2-6mm
MG-T: 02
A)
S-M WB-200-CH50-2
Thickness
6 mm
B)
Height
C)
D)
P y (KN)
P y (KN)
P x (KN)
P x (KN)
Width
Items list:
Function Type Thickness (mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1
B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1
C) Angle Bracket S-M AC CH60-2 4 1,7 1371436 1371435 2
D) Self Lock Boltset S-M LS-NU-M10x25 10 0,05 1371980 1371437 11
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 60-2 & CH 60-2
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1500 300 3,00 2,10 0,70 6,00 2,20
1500 600 1,50 1,20 0,40 3,90 1,30
1500 900 1,00 0,75 0,25 2,40 0,90
1500 1200 0,75 0,50 0,13 1,80 0,60
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
• Please note that the capacity calculation for T-support is for even loading on both sides.
51

T-SUPPORT: CH 100-3-2,5mm
MG-T: 03
A)
S-M WB-ST-CH100-3
B)
Height
Thickness
2.5 mm
C)
D)
P y (KN)
P y (KN)
P x (KN)
E)
P x (KN)
Width
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-ST-CH100-3 4 1,2 1372514** 1372515 1
B) Mekano Channel S-M CH100-3-2,5(*kg/m) 2,5 5,7* 1372504 1372505 1
C) Splice Connector T S-M SC-T-CH100-3 4 1,1 80976 80470 2
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 38
E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 2
**) S-M WB-ST-CH100-3 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1500 300 3,5 2,7 0,9 4,9 1,6
1500 600 3 2,5 0,8 4,9 1,6
1500 900 2,8 2,2 0,7 4,9 1,6
1500 1200 2,2 1,6 0,5 4,8 1,6
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
• Please note that the capacity calculation for T-support is for even loading on both sides.
52

T-SUPPORT: CH100-2T-3mm MG-T: 04
A)
S-M WB-200-CH100-2
B)
Thickness
3 mm
C)
P y (KN)
Height
P y (KN)
P x (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 1
B) Mekano Channel S-M CH100-2T3(*kg/m) 3 6* 1372190 1372185 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH100-2T3 (v) & CH100-2T3 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1500 300 4,9 4,7 1,4 7,5 2,5
1500 600 3,6 2,7 0,9 7,5 2,5
1500 900 2,4 1,8 0,6 6 2
1500 1200 1,8 1,3 0,43 4,5 1,5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
• Please note that the capacity calculation for T-support is for even loading on both sides.
53

T-SUPPORT: CH 100-4-3mm
MG-T: 05
A)
S-M WB-CH100-4
B)
Thickness
3 mm
C)
D)
P y (KN)
Height
P y (KN)
E)
P x (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 1
B) Mekano Channel S-M CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1
C) Splice Connector T S-M SC-T-CH100-4 6 1.2 1372542 1372543 2
D) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 16
E) End Protection A-CH100-4 EP Plastic: PS60018 2
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-4-3 (v) & CH100-4-3 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1500 300 7,1 6 3 11 3,5
1500 600 6,9 6 3 11 3,5
1500 900 5,7 4,2 1,4 10,5 3,4
1500 1200 4,25 3,6 1,2 10,5 3,4
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
• Please note that the capacity calculation for T-support is for even loading on both sides.
54

T-SUPPORT: CH 100-4-5mm
MG-T: 06
A)
S-M WB-CH100-4
B)
Thickness
3 mm
C)
D)
P y (KN)
Height
P y (KN)
E)
P x (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 1
B) Mekano Channel S-M CH100-4-5(*kg/m) 3 13,7* 1372530 1372531 1
C) Splice Connector T S-M SC-T-CH100-4 6 1,2 1372542 1372543 2
D) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 16
E) End Protection A-CH100-4 EP Plastic: PS60018 2
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 100-4-5 (v) & CH100-4-5 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1500 300 11 9,9 3,3 17,5 6
1500 600 10,8 9,6 3,2 17,5 6
1500 900 8,6 6,6 2,3 17,5 6
1500 1200 6,5 4,9 1,6 16 5,5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
• Please note that the capacity calculation for T-support is for even loading on both sides.
55

Mekano 50-1
Mekano 50-2
Mekano 100-1
Order no. see page 14.
HOT WORK
Page 12
COLD WORK
Page 14
Typical use for
supporting E, I & T and HVAC
2
M10x20
40
Holes
11 x 35
55
55
Material
thickness: 4 mm.
Angle Bracket Fit all channels. Also study page 64.
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M AB 55x55-10 1302494 1371712 0.2
4
M10x20
2(4)
M10x20
200
40
Fits CH50-2
CH50-2T
Fits CH50-1
Splice Connectors for channels
For Mekano channel S-M CH50-2 and CH50-1
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M SC-CH50-2 84824 81992 0.6
S-M SC-CH50-1 1372763 1302595 0.4
30ϒ
Holes 11 x 35
40
Fits CH100-1
Splice Connectors for channels
For Mekano channel S-M CH100-1
4(6-8)
M10x20
45ϒ
Holes 11 x 35
40
56
Without
notches.
HDG SS Weight
Type Art. no. Art. no. SS (kg)
OE100 SC-NO 1371681 0,6
OE100 SC* 1371678 1371683 0.6
*) Without notches.
40
60ϒ

Mekano 50-2T Order no. see page 14.
Mekano 100-2T
new!
New Channels
•
•
•
Mekano 50-2T and 100-2T are the first perforated triangle
shaped channels in the marketplace.
Mekano 50-2T and 100-2T are lightweight channel system
with improved load capacity and torsion strength.
Standard locking bolts M10x20 are to be used.
The large holes on one side of the triangle make the channel
easy to assemble, much like a regular angle channel.
The Mekano 50-2T and 100-2T complete the MultiGrid system,
offering even more opportunities in order to
•
optimize our system to fit your requirements.
• The channels are patent pending.
Compare the load data for
Mekano 50-2T and 100-2T
with other channels! Page 14-15.
The large holes make it
easy to bolt other parts to
the channel.
Two Mekano 100-2T:
Because of the large holes the
channels are easy to assemble.
Nuts and bolts fit
through slots for easy
fastening
32 mm
Ø 22
Mekano 50-2T bolted to Mekano 100-1.
The bolts can be mounted from both sides.
Mekano 100-2T bolted to
Mekano 100-1.
The bolts can be mounted
from both sides.
Use 1 part
Splice Connectors for channel 100-4
HDG SS Weight
Type Art. no Art. no. SS (kg)
S-M SC-100-5 1372535 1372534 1.2
57

Mekano 60-2
Order no. see page 15.
Angle Connector
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M AC-CH60-2 1371436 1371435 0.33
Beam Clamp-set for ”Main & Secondary steel”
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M BC-CH60-2 1371421 1371420 0.97
Slide-step
25mm to fit.
Connection L60 to existing
HE– Main Steel
(when drilling is not prohibited)
Preferred solution where the
area directly underneath is occupied.
Mekano 60-2 solutions on Ula (BP Norway)
Mekano 60-2 solutions on Ula (BP Norway)
58

HOT WORK
COLD WORK
Mekano 60-2 & Details
Page 12
Page 14
Connection L60 to Deck Stringers
Connection L60 to RHS
(when drilling is not prohibited)
Please ask for our MultiGrid
Site Support Solution for Small Bore Pipes
(Best Practice / Work Instruction)
and our
Pipe Support Standard Parts catalogue
or download from
www.oglaend-system.com
59

Mekano 100-3
Order no. see page 15.
8
M10x20
Supplied in
pairs
Splice Connectors for 100-3
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M SC-CH100-3 1372509 1372508 0.6
MultiGrid Bracing Equipment
The unique flexibility in MultiGrid makes bracing a simple bolt
job. Various standard brackets in combination with channels or
threaded rods are tailored to fit the requirements.
Ask for alternatives.
Threaded Rod
Type Art. no. SS
S-M TR-06-1000 1900290
S-M TR-10-1000 1371416
Hinge
OE100-HH
Art. no. 1371680 SS
Nyhamna Power Station
Aukra, Norway
In 2006 it was decided that
Norwegian main grid owner Statnett was
to build two gas turbine driven power plants
on the north-west coast of Norway. The three
production units were expected to produce 150 MW.
Late 2007 Oglaend System was contacted by E&I Contractor
Siemens Installation, and based on their sketch our R&D department
developed a solution including MultiGrid support, cable ladders Type OE,
trefoil cable cleats Type SmartCleat and earth links.
The Mekano 100-3 channel along with accessories was the best choice for the 4.5 meter tall
towers. The channels were easy to handle and assemble due to the light weight of the 2.5
mm thick non-magnetic AISI 316 L stainless steel. Even if none of the items exceeded the
maximum man-handling weight of 25 kg the final construction was firm and strong.
60

HOT WORK
COLD WORK
Mekano 100-3 & Details
Page 12
Page 14
200
Channel Bracket
S-M CB-100-200
1372499 SS
1372498 HDG
Max load 600 kg
350
Channel Bracket
S-M CB-100-350
1372501 SS
1372500 HDG
Max load 500 kg
500
Channel Bracket
S-M CB-100-500
1372503 SS
1372502 HDG
Max load 500 kg
215
90
Splice Connector L 4 mm
S-M SC-L-CH100-3
1372511 SS
1372510 HDG
Patented, study the Nonie
principle below.
195
90
195
Splice Connector T 4mm
S-M SC-T-CH100-3
80470 SS
80976 HDG
350
90
End Protection
A-CH100-3 EP
1372507 SS
1372506 HDG
Splice Connector U
4 mm
S-M SC-U-CH100-3
1372513 SS
1372512 HDG
150
200
150
Goal post
Bolted starter bracket
S-M BS-CH100-3
1372492 SS
1372493 HDG
The Nonie-principle = Enhanced Flexibility
Oglaend System´s patented Nonie-principle enables
adjustments in step of 5 mm, utilizing the hole combinations
between the Mekano Channel and the L-connector.
The slots in combination with our self-lock bolt-sets ensure
precise levels and eliminates risk of sliding.
CH100-3 wth CC 25 mm against
Splice L with CC 20mm
bolt-holes = 5mm steps
Square slots
(10.3x10.3mm)
for CH 100-3
CC 25 mm
CC 100
CC 100
CC 20
CC 100
+10 mm
+5 mm
0 mm
61

Mekano 100-4
Order no. see page 15.
Splice Connector T
Type: S-M SC-T-CH100-4
Art. No. 1372543 SS
SNI
8 x M10x130mm
Bracing Connector set for 15-60°
Type: S-M SC-V-CH100-4-A
Art.No. 1372546 SS
SNI
4 x M10x130mm
Plastic End Protection
Type: A-CH100-4 EP
Art. No. PS60018
How to cut Mekano CH 100-4
All cutting of profile Mekano 100-4 to be by 25mm steps.
(L1 = Always ending with ..00,-..25,-..50 or ..75mm)
Recommended exstra length for adjustments on site (dim. L):
”L” = round up ”L1” ~ 25mm and add 25mm =
L min. 25 to L max. 50mm.
Mekano 100-4 Cut marking tool
Measuring tool.
Aid for cutting of Mekano 100-4. It is important that 90° cuts are done
exactly between 2 holes. Cut tolerance: 25mm +0 / -1mm
(both sides of cut)
Type: S-M CD-CH100-4.
316L Art. No: 1372533
Example L1= 717mm = (717 + 25 ~ 25) = 750mm cut Length. -
Result “L” = 33mm
CC 25 mm
Circle slots
(Ø 10.3mm)
for CH 100-4
L1
CC 20
Notches for positioning
L
NONIE = Simple flexibility. Study the Nonie principle at page 63.
62

HOT WORK
COLD WORK
Mekano 100-4 & Details
Page 10
Page 12
Bracing Connector for 15-60°
Type: S-M SC-V-CH100-4-B
Art. No. 1372549 SS
SNI
4 x M10x130mm
Splice Connector
Type: S-M SC-CH100-5 SS
Art. No. SS 1372534 / HDG 1372535
Order two to splice one channel
SNI
8 x M10x130mm
Splice Connector L
Type: S-M SC-L-CH100-4
316L Art.No. 1372540
HDG Art No. 1372539 (NA Stock)
Patented, study the Nonie
principle page 61.
SNI
8 x M10x130mm
Bolted Main Steel connection
Range: HE240A/B – HE1000A/B
Fit all sizes from
HE240A/B to HE1000A/B
(& similar beam with
240-300mm flange-width)
Splice Connectors for channel 100-4
HDG SS Weight
Type Art. no Art. no. SS (kg)
S-M SC-100-5 1372535 1372534 1.2
To splice connect CH100-4 use 8 through-going bolts.
Type: S-M HE-NU-M10x130. Art. no.: 1372950 as bolt set with nut.
Bolted Starter
Type: BC-MS-CH100-4
316L Art. No. 1372520
Shim plates setup:
20mm – Thickness =
mm shim-plates needed.
(Shim Size:
2 a 3, 2 & 1mm)
SNI
6 x M16x65
Thickness
(HE240B)
Bolts 6 x M16x65
Mekano CH 100-4 as
alternative starter between stringers
Step 1. Plates (110x110x6mm x 2 ) to be welded to stringer.
Step 2. CH 100-4 to be placed and welded to plates.
Step 3. Apply masking tape. (Not covering welds!)
Minimum clearence 25mm
Adjustable by 5mm step sideways
63

MultiGrid: Electro, Instrumentation & Telecom
Various Angle Brackets fits all channels
Also see page 66.
Other Fixing Clamps for Ladders
and Trays see our product
catalogues.
Traverse Support
Fixed back to back
with two bolts M10
giving shear strength
pr. bolt:
2000kg
55
Holes
11 x 35
40
Fits all
11x35
40
11x35
6x35
Single
Kg
Safetyfactor
= 2
Double
55
40
Material thickness: 4 mm.
33
23
Material thickness: 3 mm.
Fixing Clamps
For fastening ladders to brackets and supports.
Gives a safe earth connection between ladder and bracket.
Type HDG SS Weight
Art. no. Art. no. SS (kg)
S-M AB 55x55-10 1302494 1371712 0.2
OE-FC-A40x33-10/10 89908 89907 0.06
OE-FC-A40x23-10/6 89917 89916 0.05
Fits all
Material
thickness: 3 mm.
Fixing Clamp for channel-traverse. Supplied in pairs.
HDG SS Weight
Type Art. no. Art. no. SS (kg)
OE FC-CHM10 1302482 1371705 0.3
11x35
Fixing Clamp for traverse channels
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M FC-CH 1302483 1302598 0.2
How to use:
Fits both
Mekano
and UNO
L
H
64
Channel Bracket for LOE, RZE ladders
and SPB trays. Type no. indicates ladder width. Safety factor 2.
HDG SS Maks last Weight
Type H + L Art. no. Art. no. Max. load SS
S-M CB-30-100 38 + 129 1302437 1371791 180 kg 0.40 kg
S-M CB-30-150 38 + 179 1302438 1371792 180 kg 0.45 kg
S-M CB-30-200 38 + 229 1302439 1371793 200 kg 0.50 kg
S-M CB-30-300 50 + 329 1302440 1371794 200 kg 0.60 kg
S-M CB-30-400 50 + 429 1302441 1371799 200 kg 0.70 kg

Choose channels
according to the
required load capacity.
SC-TW 40/390
SC-TW 90/213
SC-TW 40/290
213 290
390
Directional adjustors
4 mm
5 mm
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M SC-TW 90/213 1302515 1371700 0.4
S-M SC-TW 40/290 1302517 1371702 0.7
S-M SC-TW 40/390 84167 84168 0.9
Channel Bracket Twisted
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-SPB CB-TW 1302172 1371818 0.35
Gives a clean and professional installation with no descenders.
Fits all Mekano Channels.
11x11
7x7
97
177
Interface between tray and OE-ladder
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-OE/SPB-RF-IF-97 85082 0.1
S-OE/SPB-RF-IF-177 60381 0.2
65

Angle Brackets Fit all channels
HDG SS Weight
Type Art. no. Art. no. SS (kg)
1
M6x12
Material
thickness: 5 mm.
25
Holes
11 x 20
7 x 22
50
50
30
Holes
7 x 30
52
52
S-M AB 50x50-10/6 1372761 1371817 0.1
S-M AB 50x50-6 83410 84386 0.1
Material
thickness: 4 mm.
1
M6x12
+1
M10x20
Material
thickness: 4 mm.
40
Holes
11 x 35
7 x 20
55
55
S-M AB 55x55-10/6 1302170 1371816 0.2
2
M10x20
Material
thickness: 4 mm.
40
Holes
11 x 35
55
55
S-M AB 55x55-10 1302494 1371712 0.2
Material
thickness: 5 mm.
40
65
2
M10x20
Holes
11 x 35
13 x 25
80
S-M AB 65x80-10/12 1372759 1371713 0.2
60
65
Material
thickness: 5 mm.
2
M10x20
Holes
11 x 35
13 x 24
80
S-M AB 65x80-10/12B 1372762 1371714 0.3
60
65
2
M10x20
Material
thickness: 5 mm.
Holes
13 x 25
11 x 35
65
60
S-M AB 65x60-Z 1302501 1371715 0.3
2
M6x12
2
M10x20
Material
thickness: 5 mm.
For kombinasjon av
6 og 10mm skruer.
To combine 6 and
10mm bolts.
50
Holes
11 x 20
7 x 20
Ø 11
115
125
S-M AB 110x120-10/6 1302503 1371717 0.5
3
M10x20
Material thickness:
5 mm.
60
14 x 25
11 x 25
50
80
60
End piece for Channel S-M CH100-1-3000
HDG SS Weight
Type Art. no. Art. no. SS (kg)
S-M AB 60x60-10/12 1302502 1371716 0.3
66

Various Items
2
M10x20
2
M6x12
5 mm material 11 x 20
11 x 35
7 x 20
40
A
B
40
62
A: Cantilever Arm for 100 mm tray
B: Channel Bracket for 100 mm tray
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS (kg)
S-SPB CA-100 1302320 1302323 0.4 kg
S-SPB CB-100 1302216 1302218 0.3 kg
2(4)
M6x12
B
B
Tray Wall SHS
SPB Wall Support Bracket
Type states tray width B and type SHS it will fit using a square
U-bolt. See page 79 ordering U-bolts. SHS: Square Hollow
Section. Can also be mounted directly to a wall.
HDG SS Weight
Type Fits SHS Art. no. Art. no. SS (kg)
S-SPB SB-85-SHS-50 1302150 1371795 0.10
S-SPB SB-111-SHS-80* 1302154 1371800 0.13
S-SPB SB-135-SHS-100 1302151 1371796 0.15
S-SPB SB-155-SHS-120 1302152 1371797 0.19
S-SPB SB-175-SHS-140 1302153 1371798 0.22
*) Fits tray width 100-150
2
M6x12
200
100
11 x 20
200
105
105
7 x 30
90
30
90
65
Tray Bracket for SPBE/SPB-RF-100
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
S-SPB SB-STUD 1372902 1372903
Ø 13
75
L
50
Ø
50
M12
Earth Link “Jumpers”
Art. L Ø
Type no. Length mm Screw
mm 2
A-M EL-100/6-4 85813 100 6 4
A-M EL-100/6-6 85814 100 6 6
A-M EL-100/10-10 85815 100 10 10
A-M EL-300/10-10 85816 300 10 10
A-M EL-100/10-16 85817 100 10 16
A-M EL-300/10-16 85818 300 10 16
Other dimensions on request.
Earthing Boss
CS SS SS
Type Art.no. Art.no. Weight
A-M EB-EL-50x50x12 83427 83428 0.2 kg
Welding zone
to be repainted
T = 5mm
75
Earthing Lug
Type Art.no. Weight
A-M WB-EL 87640 0.2 kg
67
50
90
50
90
30ϒ
45ϒ
60ϒ
Holes 11 x 35
Holes 11 x 35
50
90
50
90
50
90
Holes 11 x 35
Holes 11 x 35
50
90
225
119 119 109 109
119 mm 119 mm
35 15 35 35 15
50
77
50
90
50
90
30ϒ
45ϒ
60ϒ
Holes 11 x 35
Holes 11 x 35
50
90
50
90
50
90
Cross
section
Holes 11 x 35
2(4-8)
M10x20
Fits CH100-1
SPLICE ANGLE VERTICAL
Holes 11 x 35
OE100 SA-VE
50
90
225
Splice Connectors for channels
For Mekano channel S-M CH100-1
HDG SS Weight
Type Art. no. Art. no. SS (kg)
OE100 SA-VE 1302493 1371711 0.8
4(6-8)
M10x20
Fits CH100-1
SPLICE ANGLE HORIZONTAL
11 x 35
35
50
77
Splice Connectors for channels
For Mekano channel S-M CH100-1
HDG SS Weight
Type Art. no. Art. no. SS (kg)
OE100 SA-HO 1302534 1371682 0.7

FOR COLD WORK
Z
Load
350 kg
M 10
25/35
For various tasks and for combination with channels
13
M6/M10
5
Beam Clamp Tapered M10 screw included
SS Max Weigth
Type Art. no. load (kg) SS (kg)
S-M BC-U-25/6 1371801 350
S-M BC-U-25/10 1371802 350
S-M BC-U-35/10 1371803 350
Pressure Plate (sleeve) on request.
Type: S-M BC-U-PP Art. no. 1371804
D
min/max
D max
D min
48
Press Clamp for Beam Clamp
Supplied in pairs.
Materialtykkelse HDG SS
Type Material thickness Art. no. Art. no.
S-M BC-FC 4 mm 85196 85197
24
A
Beam Clamp
Maks. belastning / Max. load weight = 800 kg.
A For D HDG SS
Type mm min/max Art. no. Art. no.
mm
S-M BC-160 260 88 - 160 85621 85622
S-M BC-300 390 102 - 300 85623 85624
Z
Load
600 kg
Z
Load
350 kg
Beam Clamp for Stringer
HDG SS Max
Type Art. no. Art. no. Load (kg)
S-M BC-ST-HD 86889 86877 350
Z
Load
1000 kg
68
D
min/max
Beam Clamp for Beam Traverse
HDG
SS
Type Art. no. Art. no.
S-M BC-CH100-3 1372490 1372491
Beam Traverse
For D HDG SS Max
Type min/max Art. no. Art. no. Load (kg)
mm
S-M BT-CH100-3 100 - 350 1372494 1372495 1000
Channel Angle For directional adjustment (t = 3mm)
HDG SS Max
Type Art. no. Art. no. Load (kg)
S-M MG-CA 80926 1372497 1000

MultiGrid offers you the freedom in
choice of discipline support
Please study the catalogue range page 2.
Contact us or simply download on:
www.oglaend-system.com
69

MultiGrid: HVAC
Prepared for
circular
channels.
Prepared for
square
channels.
Note the different
use of the plastic
pad.
Universal Strap-Bracket
A pair of brackets and levasint coated cable ties are all you
need to fix both square and circular HVAC pipes of all sizes to
the support system. Plastic pads insulate against both noise
and corrosion.
SS Weight
Type Art. no. SS
A-H HC-UN
1302393 0.5 kg
Plastic pad: Art. no.: 1302394
Levasint coated cable ties: Use for example 19mm
Band-it AE-416/ AE-436 and the lock AE 456
HVAC Clamps
When ordering, add H = Outside duct diameter +
insulation if relevant.
HVAC clamp is supplied for duct dimensions
from 160 - 850 mm / perforated 125-800mm.
SS Weight
Type (H) Art. no. SS (kg)
A-H HC-LI-125 87613 0.3
A-H HC-LI-160 87614 0.4
A-H HC-LI-180 87615 0.4
A-H HC-LI-200 87616 0.4
A-H HC-LI-230 87617 0.5
A-H HC-LI-250 87618 0.5
A-H HC-LI-315 87619 0.7
A-H HC-LI-400 87620 0.8
A-H HC-LI-500 87621 1.0
A-H HC-LI-600 87622 1.2
A-H HC-LI-630 87877 1.3
A-H HC-LI-800 87623 1.6
HDG SS Weight
Type (H) Art. no. Art. no. SS (kg)
A-H HC-160 79167 79168 0.6
A-H HC-200 78684 78689 0.7
A-H HC-250 78685 78690 0.8
A-H HC-315 78686 78691 0.9
A-H HC-355 78703 78707 1.1
A-H HC-400 78687 78692 1.2
A-H HC-450 78704 78708 1.3
A-H HC-500 78688 78693 1.4
A-H HC-600 78705 78709 1.6
A-H HC-850 78706 78710 1.9
70

Based on our standard MultiGrid details
we offer custom made
HVAC solutions
Choose channels according to the
required load capacity. Optimised use
of Mekano channels give minimum
weight and cost.
I.V.A.R. waste water plant in Mekjarvik, Randaberg
71

MultiGrid
Pipe Support Standard Details
Clamped Shoe (2) Adjustable
Type: OPS-SD PS02
Range Pipe 2”– 8”
HDG 355 & SS 316L
Please ask for our
MultiGrid
Pipe Support
Standard Parts
Catalogue
Bolted Line Guide/
Hold down (LG & HD)
Type: OPS-SD LG05
Range: Pipe Shoes 2”– 8”
HDG 355 & SS 316L
Bolted Line Guide/
Hold down
Type: OPS-SD PG01
Range: Pipe Shoes 2”– 8”
HDG 355 & SS 316L
Clamped Shoe (2)
Type: OPS-SD PS05
Range Pipe 2”– 8”
HDG 355 & SS 316L
U-BOLTS ordering list:
Type/ For Ø Art. no.
dim: mm: HDG SS
1
/2’’ M6 23 1302347 1302403
1
/2’’ M8 23 1302348 1302404
3
/4’’ M8 28 1302349 1302405
3
/4’’ M10 28 1302350 1302396
1’’ M8 36 1302351 1302406
1 1 /4’’ M10 44 1302352 1302407
1 1 /2’’ M10 50 1302353 1302408
Type/ For Ø Art. no.
dim: mm: HDG SS
2’’ M10 62 1302354 1302409
2’’ M12 62 1302355 1302410
2 1 /2’’ M10 78 1302356 1302411
2 1 /2’’ M12 78 1302357 1302412
3” M12 91 1302358 1302413
3 1 /2’’ M12 102 1302359 1302414
4’’ M12 117 1302360 1302415
OPS SD-PC13 – Pipe Clamp
With Adjustable Bolted Bracket
Pipe Clamp
Perforated and Adjustable
Type: OPS-SD PC13
Range Pipe 1/2”– 2”
HDG 355 & SS 316L
72
Slide or/and rotate
180° to fit 25mm
perforated angle.
Sleeves to be removed
for Grip function
(pre-set Non-Grip)
Adjustable to fit
25mm vertical -
Perforated angle.
Pre-set hight = 100mm
(range = +25/ -15mm)
Note:
Req. bolt torque for
M10 Self-Lock nuts
= 30Nm
Pipe Clamps perforated and adjustable
Dim. ID Clamps HDG SS Weight
Type inch mm Art.no. Art.no. SS (kg)
OPS SD-PC13-015 1/2 141 PS43755 PS43750 0.7
OPS SD-PC13-020 3/4 170 PS43756 PS43751 0.7
OPS SD-PC13-025 1 222 PS43757 PS43752 0.8
OPS SD-PC13-030 1 1 /4 222 PS43758 PS43753 0.8
OPS SD-PC13-040 1 1 /2 222 PS43759 PS43754 0.8
OPS SD-PC13-050 2 222 PS43761 PS43760 0.9

U-Strap Non-Grip
Type: OPS-SD PC01
Range Pipe 2”– 8”
HDG 355 & SS 316L
U-Strap Grip
Type: OPS-SD PC02
Range Pipe 2”– 8”
HDG 355 & SS 316L
U-Bolt Grip
(Vibro-damping)
Type: OPS-SD PC05
Range Pipe 1/2”– 8”
HDG 355 & SS 316L
U-Bolt Non-Grip
(Vibro-damping)
Type: OPS-SD PC06
Range Pipe 1/2”– 8”
HDG 355 & SS 316L
MultiGrid Adapter
U-Bolt & U-Strap
Type: OPS-SD AD01-A
Range: U-Bolt 1/2”– 2”
Range : U-Strap 6” & 8”
HDG 355 & SS 316L
MultiGrid U-Strap Adapter
Type: OPS-SD AD01-B
Range : U-Strap 2” & 5”
HDG 355 & SS 316L
U-Bolt Grip
Type: OPS-SD PC04
Range Pipe 1/2”– 8”
HDG 355 & SS 316L
U-Bolt Non-Grip
Type: OPS-SD PC03
Range Pipe 1/2”– 8”
HDG 355 & SS 316L
U-Bolt and U-Strap Adapters
HDG SS Weight
Type Art. no. Art. no. SS (kg)
OPS SD-AD01-A PS60053 PS60051 0,3
OPS SD-AD01-B PS60052 PS60050 0,8
B
Type:
OPS-SD PC23
with 50mm
longer
base plate
Type:
OPS-SD PC21
with 50mm longer
base plate
Pipe Clamp
With Perforatet
Base Plate
Type: OPS-SD PC23
Range Pipe 3”– 4”
HDG 355 & SS 316L
Pipe Clamp with Perforatet Base Plate
Type: OPS SD-PC21
Range Pipe 1/2”– 2”. HDG 355 & SS 316L
Pipe Clamps for stdr. ST-pipes. For Cu/Ni on request.
Dim. B HDG SS Weight
Type inch mm Art. no. Art. no. SS (kg)
OPS SD-PC21-015 1/2 30 PS44105 PS44100 0,5
OPS SD-PC21-020 3/4 30 PS44106 PS44101 0,5
OPS SD-PC21-025 1’ 30 PS44107 PS44102 0,6
OPS SD-PC21-030 1 1 /4 30 PS44108 PS44103 0,6
OPS SD-PC21-040 1 1 /2 30 PS44109 PS44104 0,7
OPS SD-PC21-50 2 30 PS44111 PS44110 0,8
OPS SD-PC23-050 2 30 PS43905 PS43900
OPS SD-PC23-065 2 1 /2 30 PS43906 PS43901
OPS SD-PC23-080 3 30 PS43907 PS43902 1,2
OPS SD-PC23-090 3 1 /2 30 PS43908 PS43903 1,5
OPS SD-PC23-100 4 30 PS43909 PS43904 1,8
73

Oglaend System have commissioned Aveva to produce our Cable
Tray, Ladder and Supports catalogue within their PDMS format. This
has been done to ensure that our equipment codes are produced
in a way that is fully compatible with PDMS and that Aveva will fully
support the software with their existing client base.
Our Supports, Cable Trays and Ladders can be downloaded from our web page.
SmartPlant ® 3D and PDS ®
SmartPlant® 3D is an advanced plant design software and
Intergraph Process, Power & Marine’s next-generation, datacentric,
rule-driven solution for streamlining engineering design
processes while preserving existing data and making it more
usable/re-usable.
A fundamental component
of Intergraph’s SmartPlant
Enterprise, SmartPlant
3D is a complementary,
full-suite solution
that provides all the
capabilities needed to
design a plant, and then
keep it as-built throughout
its life cycle.
Intergraph PDS is a comprehensive, intelligent computer-aided
design/engineering (CAD/CAE) application.
Production-driven, PDS delivers the best design possible - and
does it more efficiently to reduce the total installed cost of the
project. It enhances value and minimizes risk while preserving
the value of data.
Intergraph PDS provides seamless integration with the design
tools and catalogues of Oglaend System.
Contact us for SP3D and PDS catalogue.
74
www.oglaend-system.com

MultiGrid: Ships
Flexible Support Plan and a Simplified support plan
Use our low weight versatile Mekano Channels instead of
the heavy welded traditional solutions.
For full range
Please ask for our catalogue;
Cable Ladders and
Accessories for Ships
or download from
www.oglaend-system.com
Flexible support plan
Only the welding channels are fixed in the construction
yard by the fabricator.
Then the installation contractor can fit the equipment without
need of repainting. The channels provide multiple fixing points
for cable ladders and small pipes, and also function as stiffeners
for the stringers. The flexibility makes it easy to
install and adjust E, I&T and piping, making
this a very cost efficient solution.
Simplified support plan
Only the welding brackets are installed by the fabricator.
Then the installation contractor can fit the equipment without
need of repainting.
The brackets combined with channels
give fixing points for cable ladders
and small pipes throughout the
equipment route.
75

Multidiscipline support system for concrete constructions
FOR COLD WORK
Cast the Concrete Insert Rail into the concrete construction for full Multidiscipline Support.
Additional concrete clamps for all our Mekano Channels and Support Equipment complete the
MultiGrid system.
Concrete Insert Rail as
MultiGrid Ceiling on
Ormen Lange.
Please ask for our special folder describing
the use of our Insert Rail
Order Code for Concrete Insert Rail:
Foam included. Type states length in mm
HDG SS
Type: Art. no. Art. no.
S-M CIC-V-50-1-3000 1303393 1303390
S-M CIC-V-50-1-2500 1303394 1303391
S-M CIC-V-50-1-1250 1303395 1303392
Nail plate: S-M CIC-V-FC
79717C
Nail box 500 pcs.:S-M CIC-V-NA
79717H
T-bolt M10x30: S-M CIC-V-TS 80911 80910
76

Fixing brackets for concrete
Choose starters according to the required load capacity.
Ceiling Bracket for single or double CH100-1
For order details and load capacities
see page 12-13.
Also study Angle Brackets on page 68.
Ceiling Bracket for Concrete Insert Rail. Safety factor 2.
HDG SS Max. Weight
Type L Art. no. Art. no. load (kg) SS (kg)
S-M BS-CH50-2 80133 1000 0.5
Page 81
Fix with: 1 bolt max Ø 12mm
L = Type length + 40mm
Cantilever Arm for LOE, RZE ladders and SPB trays.
Type states width. Safety factor 2.
HDG SS Maks last Weight
Type L Art. no. Art. no. Max. load (kg) SS (kg)
S-M CA-35-100 1372689 1302442 350 0,4
S-M CA-35-200 1372690 1302443 250 0,5
S-M CA-35-300 1372691 1302444 200 0,6
S-M CA-35-400 1372692 1302445 175 0,8
S-M CA-35-500 1372693 1302446 150 0,9
S-M CA-35-600 1372694 1302447 125 1,1
Fix with:
1 bolt max Ø 12mm
12.5 x 25
Page 81
Holes:
7 x 20
9 x 30
L
L
c/c 53
94
Cantilever Arm for LOE, RZE ladders and SPB trays.
Type states ladder width. Safety factor 2.
HDG SS Max. Weight
Type L Art. no. Art. no. load (kg) SS (kg)
S-M CA-30-100 86275 86270 150 0.35
S-M CA-30-150 86276 86271 100 0.42
S-M CA-30-200 86277 86272 80 0.48
S-M CA-30-300 86278 86273 60 0.67
S-M CA-30-400 86279 86274 50 0.81
L = Type length + 40mm
For wider
ladders and trays
we recommend U-frames.
Choose starters according to the required load
capacity.
77

Multidiscipline support system in FRP
Oglaend System’s enhanced FRP system consists
of a multidicipline heavy duty support system
and a full range of cable trays and cable
ladders. All made from Fiber Reinforced Plastic.
FRP CABLE LADDERS, TRAYS
AND SUPPORT SYSTEM
Ask for our special
catalogue!
ISO 9001 2008
CERTIFIED
Being first is good, being smart is better, being both is Simply the Best!
The FRP Support System
is simple, smart and fast,
whatever solution you require
• A light-weight Multidiscipline support system
• Corrosion resistant
• Simple hand tools used for cutting and drilling
• Modifications are easily done on site
Our FRP support system with ladders and trays installed
in a highly corrosive environment at the Elkem Solar
Silicium production facilities in Norway.
78

Miscellaneous products:
Type UNO
Ask for special catalogue
A complete range of
UNO support channels
and accessories
along with best practice
examples.
RHS U-bolts for UNO:
Ordering list in the
UNO catalogue
UNO channel fixed to RHS 80 with Square U- bolt type M8-RHS-80.
The UNO channels support equipment plate and cable tray.
Cantilever console fixed to RHS
with UNO 3-hole brackets and
Square U- bolts.
Square U- bolts used to fix
weather house bracket.
Square U-bolt for RHS beams
ordering list:
SS
Type states dim. Bolt/RHS Art. no.
S-M UB-SQ-M8-SHS-50 1372590
S-M UB-SQ-M8-SHS-80 1372591
S-M UB-SQ-M8-SHS-100 1372592
S-M UB-SQ-M10-SHS-120 1372593
S-M UB-SQ-M10-SHS-140 1372594
M10 supplies from stock.
The white hook is approved by DNV
Constructed to
support loads from all
kinds of cables. Made of
synthetic, none conductive
material. Available in three
different sizes:
Safety hook (Temporary solution)
Type (white)
Safe (kg)
Approved by DNV Art. no. Length Working Load Weight
A-M HT-6 1372893 160mm (6”) 60
A-M HT-9 1372894 230mm (9”) 55
A-M HT-12 1372895 310mm(12”) 190
Type (LI=green)
Light version is not approved by DNV. For some less load.
A-M HT-LI-6 80902 160mm (6”)
A-M HT-LI-9 80903 230mm (9”)
A-M HT-LI-12 80904 310mm(12”)
79

Self-Lock System
includes Vibration-proof fasteners
SELF-Locking BOLT SETS with pan head and flange nuts
Self-Lock system is supplied in stainless steel.
Other bolts & fixing items see below and next page.
Old-fashioned:
The nut is
moveable
during
vibrations
bacause of
side wards
thread gap.
Self-Lock Nut details (A4-80)
Descrition Height Key size Torque STD SS
Type (mm) (mm) (Nm) Packs Art. no.
DIN 6923 S-M NU-FL-M6 5,8 10 8-10 200 1371971
DIN 6923 S-M NU-FL-M8 7,9 13 20-23 200 1371972
DIN 6923 S-M NU-FL-M10 9,6 15 40-45 200 1371973
DIN 6923 S-M NU-FL-M12 11,8 18 80-85 200 1371343
Standard Nut details (A4-80)
Descrition Height Key size Torque STD SS
Type (mm) (mm) (Nm) Packs Art. no.
DIN 934 S-M NU-M6 4,8 10 6-7 200 1372781
DIN 934 S-M NU-M8 6,4 13 15-17 200 1371340
DIN 934 S-M NU-M10 7,9 17 30-33 200 1371341
DIN 934 S-M NU-M12 10 19 60-62 200 1371342
New standard:
The nut is locked during
vibrations because all
thread contact stops
side-wards movement.
Self-Lock, a unique pretension
thread locking system.
Ask for separate brochure.
Bolt details for Mekano 60-2 system (Channel S-M CH60-2)
SS
Description Type Art. no.
M10x25mm locking bolts A4 DIN 603 S-M LS-M10x25 84352
M10x30mm locking bolts A4 DIN 603 S-M LS-M10x30 89821
M10x35mm locking bolts A4 DIN 603 S-M LS-M10x35 82709
M10x50mm locking bolts A4 DIN 603 S-M LS-M10x50 89822
M10x70mm locking bolts A4 DIN 603 S-M LS-M10x70 81396
M10x1000mm Threaded rod A4-80 DIN 975 S-M TR-M10x1000 87995
M10 Self-Lock Nuts A4-80 DIN 6923 S-M NU-FL-M10 1371973
Various use:
Dimensions M10 is for splice connections e.g.:
Type: S-M SC-L-CH100-4
Use: 8 x M10x130mm
Other dimensions is for various items e.g.:
Type: BC-MS-CH100-4
Use: 6 x M16x65mm
For Bracing Connection
Type: S-M SC-V-CH100-4-A
and S-M SC-V-CH100-4-B
Use: 4 x M10x130mm for splice
and 1 x M20x130mm for hinge function
Bolt details for Mekano 100-4 system (Channel S-M CH100-4)
SS
Description Type Art. no.
M10x130 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X130 1372950
M10x130 HEX Bolt A4 80 DIN 931 S-M HE-M10X130 1372572
M10x140 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X140 1372951
M10x140 HEX Bolt A4 80 DIN 931 S-M HE-M10X140 1372573
M10x150 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X150 1372952
M10x150 HEX Bolt A4 80 DIN 931 S-M HE-M10X150 1372574
M10x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M10X1000 1372953
M10x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M10X1000 87995
M10 Self-Lock Nut A4-80 (L=10mm) DIN 6923 S-M NU-FL-M10 1371973
M12x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M12X1000 1372954
M12x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M12X1000 87996
M12 Self-Lock Nut A4-80 (L=12mm) DIN 6923 S-M NU-FL-M12 1371343
M16x50 HEX Bolt-Set A4-80 S-M HE-NU-M16X50 1372970
M16x50 HEX Bolt A4 80 DIN 933 S-M HE-M16X50 1372926
M16x65 HEX Bolt-Set A4-80 S-M HE-NU-M16X65 1372971
M16x65 HEX Bolt A4 80 DIN 933 S-M HE-M16X65 1372927
M16x70 HEX Bolt-Set A4-80 S-M HE-NU-M16X70 1372972
M16x70 HEX Bolt A4 80 DIN 933 S-M HE-M16X70 1372928
M16x80 HEX Bolt-Set A4-80 S-M HE-NU-M16X80 1372973
M16x80 HEX Bolt A4 80 DIN 933 S-M HE-M16X80 1372929
M16x90 HEX Bolt-Set A4-80 S-M HE-NU-M16X90 1372974
M16x90 HEX Bolt A4 80 DIN 933 S-M HE-M16X90 1372930
M16 Full Metal Lock Nut A4-80 (L=13mm) DIN 980 S-M NU-FL-M16 1372969
M20x130 HEX Bolt-Set A4-80 S-M HE-NU-M20X130 1372975
M20x130 HEX Bolt A4 80 DIN 931 S-M HE-M20X130 1372580
M20 Full Metal Lock Nut A4-80 (L=16mm) DIN 980 S-M NU-FL-M20 1372581
80

*) Low
*) Low
High
LÅSESKRUER
LOCKING BOLT SETS
m/linsehode og flensmutter
With pan head and flange nuts
Self-Lock only in SS
LÅSESKRUER
LOCKING BOLTS
SEKSKANTSKRUER
HEXAGONAL BOLTS
Lengre utgaver
leveres i DIN 931
delgjenget.
Longer lengths
in DIN 931
partly threaded.
Spisset / Cone point
LINSESKRUER
PAN HEAD SCREWS
With Torx T30
BITS for torx T30 conical
FLENSMUTTERE
FLANGE NUTS
Self-Lock only in SS
SEKSKANTMUTTERE
HEXAGONAL NUTS
SKIVER
WASHERS
Type codes:
t=
OD
Ø
10.5 x 20 x 2
STJERNESKIVER
STAR WASHERS
EKSPANSJONSBOLTER
CONCRETE ANCHOR BOLTS
Kvaliteter: V.G. = 5.8
Qualities: S.S. = A4-70
P.G. = 5.8
SELVBORENDE SKRUER
Inntil/Up to 1 mm stålplate/steelplate
Inntil/Up to 3 mm stålplate/steelplate
Inntil/Up to 3 mm stålplate/steelplate
HUSK: Skruer er inkludert!
REMEMBER: Screws are included!
SKRUER / SCREWS TYPE
STD. packs PG. HDG SS
PG+HDG / SS Art. no. Art. no. Art. no.
M 6 x 12 * S-M LS-NU-M6x12 200 1372750 1371981
M 6 x 16 * S-M LS-NU-M6x16 200 84487
M 6 x 20 * S-M LS-NU-M6x20 200 1371982
M 6 x 30 S-M LS-NU-M6x30 200 1372749 1371361
M10 x 20 * S-M LS-NU-M10x20 100 1371983
M10 x 25 * S-M LS-NU-M10x25 100 1371980 1371437
M10 x 50 S-M LS-NU-M10x50 50 1371589 1371362
M 6 x 12 * S-M LS-M6x12 200 1372167 1372161
M 6 x 16 * S-M LS-M6x16 200 84493
M 6 x 25 DIN 603 S-M LS-M6x25 200 / 100 1372169 1372162
M 6 x 50 DIN 603 S-M LS-M6x50 200 / 100 1371360 85520
M10 x 20 * S-M LS-M10x20 200 / 100 1372163
M10 x 25 * S-M LS-M10x25 100 / 50 1372765
M10 x 30 DIN 603 S-M LS-M10x30 100 / 50 86008 89821
M10 x 35 DIN 603 S-M LS-M10x35 100 82709
M10 x 50 DIN 603 S-M LS-M10x50 50 89822
M10 x 70 DIN 603 S-M LS-M10x70 50 81396
M 6 x 12 DIN 933 S-M HE-M6x12 200 1372780
M 6 x 16 DIN 933 S-M HE-M6x16 200 1372171 1371318
M 6 x 20 DIN 933 S-M HE-M6x20 200 1372172 1371319
M 6 x 30 DIN 933 S-M HE-M6x30 200 1371320
M 8 x 20 DIN 933 S-M HE-M8x20 200 1371301 1371321
M 8 x 25 DIN 933 S-M HE-M8x25 200 1371302 1371322
M 8 x 30 DIN 933 S-M HE-M8x30 200 1371303 1371323
M10 x 16 DIN 933 S-M HE-M10x16 100 1372178 1371324
M10 x 20 DIN 933 S-M HE-M10x20 200 / 100 1371304 1371325
M10 x 25 DIN 933 S-M HE-M10x25 200 / 100 1371305 1371326
M10 x 30 DIN 933 S-M HE-M10x30 200 / 100 1371306 1371327
M10 x 35 DIN 933 S-M HE-M10x35 100 1371307 1371328
M10 x 45 DIN 933 S-M HE-M10x45 100 1371308 1371329
M10 x 50 DIN 933 S-M HE-M10x50 100 1371309 1371330
M10 x 55 DIN 933 S-M HE-M10x55 100 / 50 1371310 1371331
M12 x 25 DIN 933 S-M HE-M12x25 100 1371311 1371332
M12 x 35 DIN 933 S-M HE-M12x35 100 1371312 1371333
M12 x 45 DIN 933 S-M HE-M12x45 100 / 50 1371313 1371334
M10 x 40 DIN 933 S-M HE-M10x40 100 1371314 1371335
M 6 x 16 DIN 7985 S-M PS-M6x16 200 1372164 1372156
M 6 x 20 DIN 7985 S-M PS-M6x20 200 1372842 1372157
M 6 x 25 DIN 7985 S-M PS-M6x25 200 84954 1372158
M 6 x 30 DIN 7985 S-M PS-M6x30 200 1372166 1372159
M 6 x 40 DIN 7985 S-M PS-M6x40 100 1372168 1372160
Bits conical Torx T30 1371417
6 mm DIN 6923 S-M NU-FL-M6 200 1372843 1371971
8 mm DIN 6923 S-M NU-FL-M8 200 1372831 1371972
10 mm DIN 6923 S-M NU-FL-M10 200 1372832 1372180 1371973
12 mm DIN 6923 S-M NU-FL-M12 200 1371343
M 6 x 10 DIN 934 S-M NU-M6 100 1372844 1372781
M 8 x 13 DIN 934 S-M NU-M8 100 1372176 1371340
M10 x 17 DIN 934 S-M NU-M10 100 / 50 1372845 1371341
M12 x 19 DIN 934 S-M NU-M12 100 / 50 1372179 1371342
5x30.5x1.5 S-M WA-5x30.5x1.5 200 84394
6x12x1.6 DIN 125 S-M WA-6.4x12x1.6 200 1372782
6x18x1.6 DIN 125 S-M WA-6.4x18x1.6 200 1372175 1371349
6x25x1.5 S-M WA-6x25x1.5 200 1372848 1371350
8x16x1.6 DIN 125 S-M WA-8.4x16x1.6 100 1372849 1371345 1371351
8x40.3x1.5 S-M WA-8x40.3x1.5 200 84345
10.5x20x2 DIN 125 S-M WA-10.5x20x2 100 1372850 1371352
12x24x2.5 DIN 125 S-M WA-13x24x2.5 100 1371346 1371353
7x30.4x1.5 S-M WA-7x30,4x1,5 200 84562
11x32x1 S-M WA-11x32x1 200 1371354
7x35x2 S-M WA-7x35x2 200 1371594
10x(29x33)x3 S-M WA-10x(29x33)x3 200 84110
M 6 DIN 6798 S-M SW-M6 200 1372852 1371355
M 8 DIN 6798 S-M SW-M8 100 1371356
M10 DIN 6798 S-M SW-M10 100 1372854 1371357
M12 DIN 6798 S-M SW-M12 100 1371359 1371358
M 6 x 40 S-M AC-6x40 100 1372767
M 6 x 52 S-M AC-6x52 100 1371368
M 8 x 50 S-M AC-8x50 100 1372768 1371369
M 8 x 60 S-M AC-8x60 100 1371364
M10 x 60 S-M AC-10x60 50 1372769 1371365 1371370
M10 x 92 S-M AC-10x85 50 1371366 1371371
M12 x 110 S-M AC-12x110 25 89823
i 100-pakn. / SELF-TAPPING SCREWS in packs of 100
4,2 x 13mm 32-PH 100 1349417
4.2 x 14mm 34-PH 100 1372820
4.2 x 25mm 36-PH 100 1372821
SELVBORENDE RUSTFRIE SKRUER / SELF-TAPPING STAINLESS STEEL SCrEWS
For opptil 2.5mm tykkelse 4.8 x 13 mm MArUTEx M4.8x13 SS in A2 quality 100 1371373
For up to 2.5mm thickness 4.8 x 25 mm Marutex M4.8x25 SS in A2 quality 100 1371374
Bits for Marutex Bits 1371375
Maks tiltrekningsmoment / Max tightening torque for Self-Lock Flange Nuts: M6 = 8-10Nm, M8 = 20-23Nm, M10 = 40-45Nm, M12 = 80-85Nm
PG = 4-7 my zink. HDG = 40-70 my zink. ww = A4-70 (Hex = A4-80)
81

PR = Primed
HDG = Hot Dip Galvanized
SS = Stainless Steel EN 1.4404
ALU = Aluminium
Perforated Channels
For other support of trays, ladders and electrical installations.
Available in 3m lengths.
7
7
20 mm
15
20 mm
35
15
35
7 mm 15
35
7 mm 15
35
11 mm
30
11 mm
30 30
30
11 mm
11 mm
7 10 7
7 10 7
16 mm
16 mm
Flat Iron
Crosswise perforated
PR HDG SS ALU Weight
Type Art. no. Art. no. Art. no. Art. no. HDG (kg)
Fl-CW-7x20-30x5x3000 1372104 1372130 2,6
Fl-CW-7x20-40x5x3000 1372105 1372131 3,8
Fl-CW-7x20-50x4x3000 1372101 1372103 4,0
Lengthwise perforated
SS (kg)
Fl-LW-7x35-25x5x3000 1372107 1372111 1371930 2,4
Fl-LW-7x35-30x5x3000 1372108 1372112 1371931 78173 3,0
Fl-LW-7x35-40x5x3000 1372109 1372113 1371932 78229 4,2
Fl-LW-7x35-50x5x3000 1372110 1372114 1371933 5,5
Fl-LW-11x35-40x5x3000 81477 81484 86858 3,9
Fl-LW-11x30-50x5x3000 81485 1371935 5,4
Fl-LW-11x30-40x6x3000 1371984 5,0
Fl-LW-11x30-40x8x3000 1372100 1372102 6,6
10 7 30
10 7 30
7 mm
7 mm
11 mm
11 mm
7 mm
7 mm
11 mm
11 mm
15
30
15
30
30
30 30
30
15
30
15
30
30
30
15
35 15
35
Angle Iron
Crosswise perforated
PR HDG SS ALU Weight
Type Art. no. Art. no. Art. no. Art. no. HDG (kg)
AI-CW-7x16-30x30x3x3000 1372132 1372134 1371942 78228 3,9
AI-CW-7x16-40x40x4x3000 1372133 1372140 1371943 6,9
Lengthwise perforated
AI-LW-7x30-30x30x3x3000 1372115 1372117 1371939 3,9
AI-LW-7x30-40x40x4x3000 1372116 1372118 1371940 6,9
AI-LW-7x30-50x50x3x2000 78045 1,5*
AI-LW-11x30-50x50x5x3000 1372119 1372120 1371941 10,7
Double lengthwise perforated
AI-LW-7x30-40x40x4x3000 1371945 6,6
AI-LW-11x30-50x50x5x3000 78662 1371946 10,1
AI-LW-11x35-49x49x4x3000 88349 88348 7,4
AI-LW-7x35-49x49x4x3000 88347 88342 7,9
AI-LW-7x35/11x35-49x49x4x3000** 88346 88344 7,7
AI-LW-13x40-54x54x4x3000 88351 7,8
Predefined lengths up to 1,5m are supplied on request. *) Weight in ALU
11 mm
11 mm
Welding Channel for tubing clamps
For quick and easy tubing installation with ETIN tubing clamp.
Available in 3m lengths.
PG HDG SS ALU Weight
Type Art. no. Art. no. Art. no. Art. no. SS (kg/m)
RZ- WB 78463 78497 1
28,5
25
25
7
82
15
5
35
36,5
15
35
50
15
50

LOCATIONS
HOLDING COMPANY
Øglænd Industrier AS
P.O. Box 133
NO-4358 Kleppe
Tel.: + 47 51 78 81 00
Fax: + 47 51 78 81 60
www.oglaend-system.com
SUBSIDIARY
Norway
Øglænd System AS
P.O. Box 133
NO-4358 Kleppe
Tel.: + 47 51 78 81 00
Fax: + 47 51 78 81 60
Fax sales office: + 47 51 78 81 61
Email: oglaend@oglsys.no
www.oglaend-system.com
Denmark
Øglænd System AS
Tel.: +45 86 88 66 66
Fax: +45 86 88 66 67
Email: oglaend-system@oglsys.dk
Dubai (Middle East)
Oglaend Industries Middle East
Tel.: + 971 4 887 8134
Fax: + 971 4 887 8143
Mobile: + 971 50 55 86 183
Email: sales@oglaend.ae
Malaysia
Oglaend Industries SDN BHD
Tel.: + 60 3 51 922 049
Fax: + 60 3 51 922 039
Mobile: + 60 1 26 85 57 65
Email: sales@oglaendind.com
fraser@oglaendind.com
The Netherlands
Oglaend System BV
Tel.: + 31 1804 14 204
Fax: + 31 1804 19 395
Email: rfq@oglaend-system.nl
Russia (St. Petersburg)
Oglaend System Russia
Tel.: +7(812) 313 1580
Fax: +7(812) 313 1580
Email: info@oglsys.ru
www.oglaend-system.ru
Singapore (South East Asia)
Oglaend System Singapore Pte. Ltd.
Tel.: + 65 67 48 82 78
Fax: + 65 67 48 86 15
Email: oglaend.system@pacific.net.sg
Sweden
Ögländ System AB
Tel.: + 46 40 45 74 60
Fax: + 46 40 45 67 25
Email: oglaend-system@oglsys.se
UK
Oglaend System UK Ltd.
Tel.: + 44 121 552 9662
Fax: + 44 121 544 6627
Email: oglaend.system@oglsys.co.uk
USA
Oglaend System USA
Tel.: +1 832 288 4452
Email: sales@oglsys-us.com
Korea
Oglaend System Korea Co Ltd
Tel.: + 82 518 320 761
Fax: + 82 518 320 762
Email: oglaend@oglaend-system.co.kr
SALES OFFICES
Norway
Øglænd System AS, Division Oslo:
Tel.:+ 47 22 25 15 10
Fax: + 47 22 25 25 21
Øglænd System AS, Division Ålesund:
Tel.: + 47 70 19 09 50
Fax: + 47 70 19 09 51
AGENTS - DlSTRlBUTORS
Abu Dhabi
Proserv Albadie LLC
Tel.: + 971 26 27 73 70
Fax: + 971 29 27 79 72
Email: proserv@emirates.net.ae
www.proserv.no
Australia
J. T. Day Pty. Ltd.
Tel.: + 61 8 9303 2248
Fax: + 61 8 9303 2446
Email: enquiries@jtday.com.au
www.jtday.com.au
Brazil
M.O.TECH do Brazil
Tel.: + 55 21 2532 2101
Fax: + 55 21 2517 2437
Email: motech@motech.com.br
www.motech.com.br
Brunei
Shinba Integrated Engineering Services
Tel.: + 673 333-1489
Fax: + 675 333-6333
Email: info@shinbaies.com
Canada
Apel/CSA Enterprises
Tel.: + 1 902 450 5647
Fax: + 1 902 450 5286
Email: urquhart@csarep.com
www.csarep.com
NOSO Ltd.
Tel.: + 1 709 782 2645
Fax: + 1 709 782 0534
Email: mshinkle@coil.ca
www.noso.ca
Finland
Elmarino - Shipping OY
Tel.: + 358 22 54 61 00
Fax: + 358 22 54 62 76
Iceland
Smith & Norland
Tel.: + 354 52 03 000
Fax: + 354 52 03 011
Email: sminor@sminor.is
www.sminor.is
lndonesia
PT. Multi Tarex MuIia
Tel.: + 62 21 3983 5337
Fax: + 62 21 3983 5340
Email: agus@multitarex.co.id
www.multitarex.com
Italy
Piemme Broker S.R.L.
Tel.:+39 02 906 33621
Fax +39 02 906 32036
Email: m.maiandi@pmbroker.it
www.pmbroker.it
Malaysia
Offshore Industries Sdn Bhd
Tel.: + 60 3-9284 0613
Fax: + 60 3-9284 1051
Email: oisbkl@tm.net.my
Poland
Nd Service Sp. Z.O.O.
Tel.: + 48 665 070 111
Email: wojciech.pedzich@ndservice.pl
www.ndservice.pl
Thailand
Probity International Co Ltd.
Tel.: + 66 2 710 6146 Ext. 107
Fax: + 66 2 710 6147
Email: ak@probity.co.th
www.probity.co.th
The Baltic States
Bastini OÜ
Tel.: + 372 660 5811
Fax: + 372 660 5812
Email: sales@bastini.ee
Øglænd System AS, Division Trondheim:
Tel.: + 47 73 80 99 70
Fax: + 47 73 80 99 77
Finn H&T Group Oy
Tel.: +358 45 630 4004
Fax: +358 3 5752550
Email: teppo.kuivanen@finnhtgroup.fi
www.finnhtgroup.fi
Vietnam
MT Corp.
Tel.: + 848 821 0373
Fax: + 848 821 0358
Email: mail@mt-co.com
*
••
•
•
•
•
•
•
x
•
*
•
x
HEAD OFFICE AND FACTORY
SUBSIDIARIES
AGENTS – DISTRIBUTORS
SALES OFFICES
FABRICATION FACILITIES

Simply the BEST!
This has been our motto since the company was founded in 1977. By living up
to the motto we have become the market leader in our field – worldwide.
Oglaend System´s goal is to develop systems that are better, simpler and more
economic overall.
Konsern/Holding company:
Øglænd Industrier AS
Datterselskap/Subsidiary:
Øglænd System AS
Hovedkontor fabrikk/Head Office factory:
P.O. box 133, N-4358 Kleppe,
Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60
Fax sales office: +47 51 78 81 61
84
www.oglaend-system.com Email: oglaend@oglsys.no 12.12