Mounting Brackets - Dlog

Mounting
Brackets
DLoG X 7, X 10 and X 12
DLoG MPC 6/110 and 6/112
DLoG IPC 7/215
DLoG ITC 7

We reserve the right to modify the contents of this catalog at any time and without prior notice.
DLoG GmbH assumes no liability for technical inaccuracies, typographic errors or faults in this catalog.
DLoG GmbH also assumes no liability for damages caused directly or indirectly by the delivery,
performance or usage of this material.
The brand designations used in this catalog are in most cases also registered trademarks and are thus
subject to law.
This catalog is protected by copyright. Duplication, in whole or in part, is not permitted without prior
written approval of DLoG GmbH!
Title of the catalog: Mounting Brackets
DLoG X 7, X 10 and X 12,
DLoG MPC 6/110 and 6/112
DLoG IPC 7/215
DLoG ITC 7
Catalog completed on: 16 th of December 2009
Version: V4.00
DAN: 885502E22
© Copyright 2007-2009
DLoG GmbH
Industriestraße 15
82110 Germering
Germany
All rights reserved
Technical customer support
If you experience technical difficulties, please
consult your distributor or contact the technical
services department at DLoG’s headquarters:
(+49) 89 41 11 91 0
www.dlog.com

Table of contents
1. Operation Classes 5M3, 5M2 and 5M1..................................................8
2. DLoG X 7 .................................................................................................9
2.1. Mounting brackets...................................................................................................9
2.1.1. Mounting kit with mounting bracket, tiltable up to 15°.......................................9
2.1.2. Mounting kit with mounting bracket, tiltable up to 100°.....................................9
2.1.3. Mounting kit with mounting bracket, tiltable up to 180°...................................10
2.1.4. Mounting kit with mounting bracket, adjustable +/- 15° ..................................10
2.1.5. Mounting kit with mounting plate .....................................................................11
2.2. RAM Mount ® ...........................................................................................................12
2.2.1. RAM Mount ® short mounting kit, 1.5" ball .......................................................12
2.2.2. RAM Mount ® long mounting kit, 1.5" ball.........................................................12
2.2.3. RAM Mount ® long mounting kit, 1.5" ball, 1.25" pipe ......................................13
2.2.4. Adapter plate with RAM-VESA plate 1.5" or 2.25" ..........................................13
2.3. Clamp foot / clamp foot adapter...........................................................................14
2.3.1. Tall clamp foot adapter....................................................................................14
2.4. Wall adapters .........................................................................................................15
2.4.1. I-30 wall adapter mounting kit .........................................................................15
2.4.2. I-50 wall adapter mounting kit .........................................................................15
2.5. Vibration isolation .................................................................................................16
2.5.1. 3 elastomer springs D30 S12 mounting kit .....................................................16
3. DLoG X 10 and DLoG X 12...................................................................17
3.1. Mounting brackets.................................................................................................17
3.1.1. Mounting kit with mounting bracket.................................................................17
3.1.2. Mount. kit with mounting bracket, for 10" devices tiltable up to 100°.............17
3.1.3. Mounting kit with mounting bracket, for 10" devices .......................................18
3.1.4. Mounting kit with mounting bracket, for 12" devices .......................................18
3.2. RAM Mount ® ...........................................................................................................19
3.2.1. RAM Mount ® double, long mounting kit, 1.5" ball............................................19
3.2.2. RAM Mount ® long mounting kit, 2.25" ball ......................................................19

3.2.3. RAM Mount ® short mounting kit, 2.25" ball .....................................................20
3.2.4. Adapter plate with RAM-VESA plate 1.5" or 2.25" ..........................................20
3.3. Clamp foot / clamp foot adapter...........................................................................21
3.3.1. Clamp foot small..............................................................................................21
3.3.2. Tall clamp foot adapter....................................................................................21
3.3.3. Flat clamp foot adapter....................................................................................22
3.4. Wall adapters .........................................................................................................23
3.4.1. I-30 wall adapter mounting kit .........................................................................23
3.4.2. I-50 wall adapter mounting kit .........................................................................23
3.5. Vibration isolation .................................................................................................24
3.5.1. 3 elastomer springs D30 S12 mounting kit .....................................................24
3.5.2. 3 elastomer springs D40 S12 mounting kit .....................................................24
3.5.3. 4 elastomer springs S12 mounting kit .............................................................25
3.5.4. 4 elastomer springs S20 mounting kit .............................................................25
4. DLoG MPC 6..........................................................................................26
4.1. Mounting brackets.................................................................................................26
4.1.1. Mounting kit with mounting bracket, for 10" and 12" devices..........................26
4.1.2. Mount. kit with mounting bracket, for 10" devices tiltable up to 100°.............26
4.1.3. Mounting kit with mounting bracket, for 10" devices .......................................27
4.1.4. Mounting kit with mounting bracket, for 12" devices .......................................27
4.2. RAM Mount ® ...........................................................................................................28
4.2.1. RAM Mount ® double, long mounting kit, 1.5" ball............................................28
4.2.2. RAM Mount ® long mounting kit, 2.25" ball ......................................................28
4.2.3. RAM Mount ® short mounting kit, 2.25" ball .....................................................29
4.2.4. Adapter plate with RAM-VESA Plate 1.5" or 2.25"..........................................29
4.3. Clamp foot / clamp foot adapter...........................................................................30
4.3.1. Clamp foot small..............................................................................................30
4.3.2. Tall clamp foot adapter....................................................................................30
4.3.3. Flat clamp foot adapter....................................................................................31
4.4. Wall adapters .........................................................................................................32
4.4.1. Wall adapter I-30 mounting kit.........................................................................32
4.4.2. Wall adapter I-50 mounting kit.........................................................................32

4.5. Vibration isolation .................................................................................................33
4.5.1. 3 elastomer springs D30 S12 mounting kit .....................................................33
4.5.2. 3 elastomer springs D40 S12 mounting kit .....................................................33
4.5.3. 4 elastomer springs S12 mounting kit .............................................................34
4.5.4. 4 elastomer springs S20 mounting kit .............................................................34
5. DLoG IPC 7/215.....................................................................................35
5.1. Mounting brackets.................................................................................................35
5.1.1. Mounting kit for mounting bracket, adjustable 180°........................................35
5.1.2. Mounting kit for mounting bracket, adjustable 15°..........................................35
5.2. RAM Mount ® ...........................................................................................................36
5.2.1. RAM Mount ® long mounting kit, 2.25" ball ......................................................36
5.2.2. RAM Mount ® short mounting kit, 2.25" ball .....................................................36
5.2.3. Adapter plate with RAM-VESA Plate 1.5" or 2.25"..........................................37
5.3. Clamp foot / clamp foot adapter...........................................................................38
5.3.1. Large clamp foot adapter ................................................................................38
5.3.2. Large clamp foot..............................................................................................38
5.4. Vibration isolation .................................................................................................39
5.4.1. 6 elastomer springs mounting kit.....................................................................39
6. DLoG ITC 7............................................................................................40
6.1.1. Mounting kit with mounting bracket tiltable up to 150° (table) ........................40
6.1.2. Mounting kit with mounting bracket tiltable up to 90° (wall)............................40
6.1.3. Clamp foot / clamp foot adapter, small clamp foot ..........................................41
6.1.4. Flat clamp foot adapter....................................................................................41
6.1.5. Tall clamp foot adapter....................................................................................42
6.1.6. Mounting kit with mounting bracket.................................................................42
6.1.7. Wall adapter mounting kit................................................................................43
6.1.8. RAM Mount ® long mounting kit, 2.25" ball ......................................................43
6.1.9. RAM Mount ® short mounting kit, 2.25" ball .....................................................44
7. Suggested Solutions............................................................................45
7.1. Universal.................................................................................................................45
7.1.1. Welded mounting I mounting kit......................................................................45

7.1.2. Double plate I-35 mounting kit.........................................................................45
7.1.3. Double plate I-70 mounting kit.........................................................................46
7.1.4. Double plate I-90 mounting kit.........................................................................46
7.1.5. Double plate IV-90 mounting kit ......................................................................47
7.1.6. Counterplate I-30 mounting kit .......................................................................47
7.1.7. Counterplate I-70 mounting kit ........................................................................48
7.1.8. Counterplate I-80 mounting kit ........................................................................48
7.1.9. Plate II-70 mounting kit....................................................................................49
7.1.10. Mounting bridge 782x150x110x8 mm .........................................................49
7.1.11. Plate 540x110x8 mm mounting kit ..............................................................50
7.1.12. Extension mounting kit ................................................................................50
7.1.13. I-30 mounting kit, washers ..........................................................................51
7.2. Jungheinrich ® Forklift ...........................................................................................52
7.2.1. JH ECE 20.......................................................................................................52
7.2.2. JH ECE 20, 95 model.....................................................................................52
7.2.3. JH ECE 20.......................................................................................................53
7.2.4. JH ECE 20, 95 model, wide shaft....................................................................53
7.2.5. JH ETX 125, 99 model, ETX 150, 84 model and ETV 14, 96 model ..............54
7.2.6. JH ETX K 125, 2002 model............................................................................54
7.2.7. JH ETX AC 125TG, 02 model and ETV 214, 04 model ..................................55
7.2.8. JH EFG 16L, 00 mod., EFG DFAC15, 03 mod., Linde E 16, 97 mod.............55
7.2.9. JH ECP 100-3, 98 model and ECP LG 120, 96 model ...................................56
7.2.10. JH ECP 100-190E, 2000 model ..................................................................56
7.2.11. JH ETV 214, 04 model ................................................................................57
7.2.12. JH ETV 214, ETV 14 and ETVA 13.5 .........................................................57
7.3. Still ® Forklift ...........................................................................................................58
7.3.1. Still GX 09, 99 model.......................................................................................58
7.3.2. Still GX 10, 01 model.......................................................................................58
7.3.3. Still EGV S13...................................................................................................59
7.3.4. Still EGV 12, 99 model ....................................................................................59
7.3.5. Still CS 20, 96 model.......................................................................................60
7.3.6. Still CS 20........................................................................................................60
7.3.7. Still MX 13, 97 model.......................................................................................61
7.3.8. Still CS 20........................................................................................................61

7.4. Linde ® Forklift ........................................................................................................62
7.4.1. Linde E 16, 97 m., JH EFG 16L, 00 m., JH EFG DFAC15, 03 m. ..................62
7.4.2. Linde L 12........................................................................................................62
7.4.3. Linde L 14AP ...................................................................................................63
7.4.4. Linde E 16-02 ..................................................................................................63
7.4.5. Linde EK 15 .....................................................................................................64
7.4.6. Linde E14-02 ...................................................................................................64
7.4.7. Linde N 20 .......................................................................................................65
7.4.8. Linde R 20 .......................................................................................................65
7.4.9. Linde R 14, 00 model ......................................................................................66
7.4.10. Linde H 20T, 03/04 model...........................................................................66
7.4.11. Linde T 18....................................................................................................66
7.4.12. Linde T 20R.................................................................................................67
7.4.13. Linde T 20R, 03/04 model...........................................................................67
7.4.14. Linde T 20SF...............................................................................................68
7.4.15. Linde SPT....................................................................................................68
7.4.16. Linde T 20....................................................................................................69
7.4.17. Linde T20R..................................................................................................69
7.4.18. Linde L16AP................................................................................................70
8. Index DLoG Production No..................................................................71

1. Operation Classes 5M3, 5M2 and 5M1
This catalog specifies whether the listed mounting brackets are suitable for mobile use,
restricted mobile application or stationary use. These uses correspond to the operation
classes 5M3, 5M2 and 5M1 for mechanical environmental conditions.
The following standards offer a practical means of reference:
• DIN EN 60721-3-5: 1998 classification of environmental conditions, part 3,
section 5: Use on and in ground vehicles.
• Military standard MIL-STD 810F: 2000.
5M3 Mobile use
Operational environments with high energy vibrations and high energy shocks as well
as rough handling/transport compliant with:
• Operation class 5M3 according to DIN EN 60721-3-5 or equivalent.
• Category US Highway Truck according to MIL-STD 810F.
• Examples: Vehicles without shock absorption: Fork lifts, unbalanced machines:
Combustion engine of a construction machine.
5M2 Restricted mobile application
Operational environments with low energy vibrations and high energy shocks as well as
careful handling/transport compliant with:
• Operation class 5M2 according to DIN EN 60721-3-5 or equivalent.
• Category US Highway Truck according to MIL-STD 810F.
• Examples: Vehicles with shock absorption: Driver’s cab in a tractor, standing
machines: Machine tools.
5M1 Stationary use
Operational environments with low energy vibrations and medium energy shocks as well
as very careful handling/transport compliant with:
• Operation class 5M1 according to DIN EN 60721-3-5.
Examples: Vehicles with very good shock absorption: Car dashboard, immobile mounting
surfaces: Desk or wall.
8 Mounting brackets catalog V4 DLoG

2. DLoG X 7
2.1. Mounting brackets
2.1.1. Mounting kit with mounting bracket, tiltable up to 15°
Prod. No.: 701291
Suitable for:
DLoG X 7
Technical data:
Includes mobile mounting bracket
tilts 15°
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
2.1.2. Mounting kit with mounting bracket, tiltable up to 100°
Prod. No.: 701292
Suitable for:
DLoG X 7
Technical data:
tilts 100°
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
DLoG Mounting brackets catalog V4 9

2.1.3. Mounting kit with mounting bracket, tiltable up to 180°
Prod. No.: 701290
Suitable for:
DLoG X 7
2.1.4. Mounting kit with mounting bracket, adjustable +/- 15°
Technical data:
Includes mounting bracket
tilts 180°
Suitable for stationary use according to
class 5M1
Only on request!
Suitable for:
DLoG X 7
Technical data:
Includes mounting bracket
+/- 15° adjustable
Fastening angle 0°: Suitable for mobile
use according to class 5M3
Fastening angle 15°: Suitable for limited
mobile use according to class 5M2
10 Mounting brackets catalog V4 DLoG

2.1.5. Mounting kit with mounting plate
Prod. No.: 701287
Suitable for:
DLoG X 7
Technical data:
Includes mounting plate
Suitable for mobile use according to
class 5M3
DLoG Mounting brackets catalog V4 11

2.2. RAM Mount ®
2.2.1. RAM Mount ® short mounting kit, 1.5" ball
Plate/Arm 90 mm/Plate
Prod. No.: 701286
2.2.2. RAM Mount ® long mounting kit, 1.5" ball
Plate/Arm 150 mm/Plate
Prod. No.: 701240
Suitable for:
DLoG X 7
Technical data:
Includes screw set (PC-side)
Arm length 90 mm
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG X 7
Technical data:
Includes screw set (PC-side)
Arm length 150 mm
Suitable for mobile use according to
class 5M3
12 Mounting brackets catalog V4 DLoG

2.2.3. RAM Mount ® long mounting kit, 1.5" ball, 1.25" pipe
Plate/Arm 150 mm/U-Bolt Plate
Prod. No.: 701282
Suitable for:
DLoG X 7
2.2.4. Adapter plate with RAM-VESA plate 1.5" or 2.25"
Prod. No.: 701462
shown with RAM component
Technical data:
Includes screw set (PC-side)
Arm length 150 mm
For max. pipe diameter of
1.25" (3.18 cm)
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG X 7, DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG IPC 7/215
Technical data:
Welded or screwed connection
Depending on the configuration of the
entire system, suitable for use class 5M1
through 5M3
DLoG Mounting brackets catalog V4 13

2.3. Clamp foot / clamp foot adapter
2.3.1. Tall clamp foot adapter
Prod. No.: 701234
Suitable for:
DLoG X 7
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
14 Mounting brackets catalog V4 DLoG

2.4. Wall adapters
2.4.1. I-30 wall adapter mounting kit
Prod. No.: 701244
2.4.2. I-50 wall adapter mounting kit
Prod. No.: 701260
Suitable for:
DLoG X 7
Technical data:
Incl. screw set (for walls of 12 mm to
17 mm thickness)
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG X 7
Technical data:
Incl. screw set (for walls of 27 mm to
37 mm thickness)
Suitable for mobile use according to
class 5M3
DLoG Mounting brackets catalog V4 15

2.5. Vibration isolation
2.5.1. 3 elastomer springs D30 S12 mounting kit
Prod. No.: 701243
Suitable for:
DLoG X 7
Technical data:
Includes screw set (PC-side and
forklift side)
∅ 30 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket (Prod. No.:
701229) or fixed mounting bracket
(Prod. No.: 701225), (Prod. No.: 701233)
16 Mounting brackets catalog V4 DLoG

3. DLoG X 10 and DLoG X 12
3.1. Mounting brackets
3.1.1. Mounting kit with mounting bracket
Prod. No.: 701229
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
3.1.2. Mount. kit with mounting bracket, for 10" devices tiltable up to 100°
Prod. No.: 701227
Suitable for:
DLoG X 10
DLoG MPC 6/110
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
DLoG Mounting brackets catalog V4 17

3.1.3. Mounting kit with mounting bracket, for 10" devices
Prod. No.: 701225
3.1.4. Mounting kit with mounting bracket, for 12" devices
Prod. No.: 701233
Suitable for:
DLoG X 10
DLoG MPC 6/110
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Suitable for:
DLoG X 12
DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
18 Mounting brackets catalog V4 DLoG

3.2. RAM Mount ®
3.2.1. RAM Mount ® double, long mounting kit, 1.5" ball
Arm 150 mm
Prod. No.: 701258
3.2.2. RAM Mount ® long mounting kit, 2.25" ball
Plate/Arm 215 mm/Plate
Prod. No.: 701297
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Arm length 150 mm
Suitable for mobile use according to
class 5M3
Requires:
VESA oval mounting plate
(Prod. No.: 701257)
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Arm length 215 mm
Suitable for mobile use according to
class 5M3
DLoG Mounting brackets catalog V4 19

3.2.3. RAM Mount ® short mounting kit, 2.25" ball
Plate/Arm 130 mm/Plate
Prod. No.: 701298
3.2.4. Adapter plate with RAM-VESA plate 1.5" or 2.25"
Prod. No.: 701462
shown with RAM component
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Arm length 130 mm
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG X 7, DLoG X 10 and DLoG X 12
DLoG IPC 6/110 and DLoG IPC 6/112
DLoG IPC 7/215
Technical data:
Welded or screwed connection
Depending on the configuration of the
entire system, suitable for use class 5M1
through 5M3
20 Mounting brackets catalog V4 DLoG

3.3. Clamp foot / clamp foot adapter
3.3.1. Clamp foot small
Prod. No.: 510290
3.3.2. Tall clamp foot adapter
Prod. No.: 701234
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Requires:
Mobile mounting bracket (shown here in
the picture) (Prod. No.: 701229);
suitable for mobile use according to
class 5M3
Or clamp foot adapter
(Prod. No.: 701234), suitable for mobile
use according to class 5M3
Or fixed mounting bracket
(Prod. No.: 701225), (Prod. No.:
701233); Suitable for stationary use
according to class 5M1
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
DLoG Mounting brackets catalog V4 21

3.3.3. Flat clamp foot adapter
Prod. No.: 701231
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
22 Mounting brackets catalog V4 DLoG

3.4. Wall adapters
3.4.1. I-30 wall adapter mounting kit
Prod. No.: 701244
3.4.2. I-50 wall adapter mounting kit
Prod. No.: 701260
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Incl. screw set (for walls of 12 mm to
17 mm thickness)
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Incl. screw set (for walls of 27 mm to
37 mm thickness)
Suitable for mobile use according to
class 5M3
DLoG Mounting brackets catalog V4 23

3.5. Vibration isolation
3.5.1. 3 elastomer springs D30 S12 mounting kit
Prod. No.: 701243
3.5.2. 3 elastomer springs D40 S12 mounting kit
Prod. No.: 701032
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 30 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 40 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
24 Mounting brackets catalog V4 DLoG

3.5.3. 4 elastomer springs S12 mounting kit
Prod. No.: 701252
3.5.4. 4 elastomer springs S20 mounting kit
Prod. No.: 701251
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 30 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
Suitable for:
DLoG X 10 and DLoG X 12
DLoG MPC 6/110 and DLoG MPC 6/112
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 30 mm elastomer springs
Screw length (M8) 20 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
DLoG Mounting brackets catalog V4 25

4. DLoG MPC 6
4.1. Mounting brackets
4.1.1. Mounting kit with mounting bracket, for 10" and 12" devices
Prod. No.: 701229
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
4.1.2. Mount. kit with mounting bracket, for 10" devices tiltable up to 100°
Prod. No.: 701227
Suitable for:
DLoG MPC 6/110
DLoG X 10
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
26 Mounting brackets catalog V4 DLoG

4.1.3. Mounting kit with mounting bracket, for 10" devices
Prod. No.: 701225
4.1.4. Mounting kit with mounting bracket, for 12" devices
Prod. No.: 701233
Suitable for:
DLoG MPC 6/110
DLoG X 10
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Suitable for:
DLoG MPC 6/112
DLoG X 12
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
DLoG Mounting brackets catalog V4 27

4.2. RAM Mount ®
4.2.1. RAM Mount ® double, long mounting kit, 1.5" ball
Arm 150 mm
Prod. No.: 701258
4.2.2. RAM Mount ® long mounting kit, 2.25" ball
Plate/Arm 215 mm/Plate
Prod. No.: 701297
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side)
Arm length 150 mm
Suitable for mobile use according to
class 5M3
Requires:
VESA oval mounting plate
(Prod. No.: 701257)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side)
Arm length 215 mm
Suitable for mobile use according to
class 5M3
28 Mounting brackets catalog V4 DLoG

4.2.3. RAM Mount ® short mounting kit, 2.25" ball
Plate/Arm 130 mm/Plate
Prod. No.: 701298
4.2.4. Adapter plate with RAM-VESA Plate 1.5" or 2.25"
Prod. No.: 701462
shown with RAM component
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side)
Arm length 130 mm
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG X 7, DLoG X 10 and DLoG X 12
DLoG IPC 6/110 and DLoG IPC 6/112
DLoG IPC 7/215
Technical data:
Welded or screwed connection
Depending on the configuration of the
entire system, suitable for use class 5M1
through 5M3
DLoG Mounting brackets catalog V4 29

4.3. Clamp foot / clamp foot adapter
4.3.1. Clamp foot small
Prod. No.: 510290
4.3.2. Tall clamp foot adapter
Prod. No.: 701234
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Requires:
Mobile mounting bracket (shown here in
the picture) (Prod. No.: 701229);
suitable for mobile use according to
class 5M3
Or clamp foot adapter
(Prod. No.: 701234), suitable for mobile
use according to class 5M3
Or fixed mounting bracket
(Prod. No.: 701225), (Prod. No.:
701233); Suitable for stationary use
according to class 5M1
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
30 Mounting brackets catalog V4 DLoG

4.3.3. Flat clamp foot adapter
Prod. No.: 701231
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
DLoG Mounting brackets catalog V4 31

4.4. Wall adapters
4.4.1. Wall adapter I-30 mounting kit
Prod. No.: 701244
4.4.2. Wall adapter I-50 mounting kit
Prod. No.: 701260
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (for walls of 12 mm to 17
mm thickness)
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (for walls of 27 mm to
37 mm thickness)
Suitable for mobile use according to
class 5M3
32 Mounting brackets catalog V4 DLoG

4.5. Vibration isolation
4.5.1. 3 elastomer springs D30 S12 mounting kit
Prod. No.: 701243
4.5.2. 3 elastomer springs D40 S12 mounting kit
Prod. No.: 701032
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 30 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 40 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
DLoG Mounting brackets catalog V4 33

4.5.3. 4 elastomer springs S12 mounting kit
Prod. No.: 701252
4.5.4. 4 elastomer springs S20 mounting kit
Prod. No.: 701251
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 30 mm elastomer springs
Screw length (M8) 12 mm
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
∅ 30 mm elastomer springs
Screw length (M8) 20 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot
(Prod. No.: 510290)
34 Mounting brackets catalog V4 DLoG

5. DLoG IPC 7/215
5.1. Mounting brackets
5.1.1. Mounting kit for mounting bracket, adjustable 180°
Prod. No.: 701221
Suitable for:
DLoG IPC 7/215
5.1.2. Mounting kit for mounting bracket, adjustable 15°
Prod. No.: 701224
Technical data:
180° adjustable
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Suitable for:
DLoG IPC 7/215
Technical data:
15° adjustable
Includes screw set (PC-side)
Suitable for limited mobile use according
to class 5M2
DLoG Mounting brackets catalog V4 35

5.2. RAM Mount ®
5.2.1. RAM Mount ® long mounting kit, 2.25" ball
Plate/Arm 215 mm/Plate
Prod. No.: 701296
5.2.2. RAM Mount ® short mounting kit, 2.25" ball
Plate/Arm 130 mm/Plate
Prod. No.: 701195
Suitable for:
DLoG IPC 7/215
Technical data:
Includes screw set (PC-side)
Arm length 215 mm
Suitable for limited mobile use according
to class 5M2
Suitable for:
DLoG IPC 7/215
Technical data:
Includes screw set (PC-side)
Arm length 130 mm
Suitable for limited mobile use according
to class 5M2
36 Mounting brackets catalog V4 DLoG

5.2.3. Adapter plate with RAM-VESA Plate 1.5" or 2.25"
Prod. No.: 701462
shown with RAM component
Suitable for:
DLoG X 7, DLoG X 10 and DLoG X 12
DLoG IPC 6/110 and DLoG IPC 6/112
DLoG IPC 7/215
Technical data:
Welded or screwed connection
Depending on the configuration of the
entire system, suitable for use class 5M1
through 5M3
DLoG Mounting brackets catalog V4 37

5.3. Clamp foot / clamp foot adapter
5.3.1. Large clamp foot adapter
Prod. No.: 701253
5.3.2. Large clamp foot
Prod. No.: 510291
Suitable for:
DLoG IPC 7/215
Technical data:
Includes screw set (PC-side)
Requires:
Large clamp foot (Prod. No.: 510291)
Suitable for stationary use according to
class 5M1
Suitable for:
DLoG IPC 7/215
Requires:
Mounting kit for mounting bracket,
adjustable 180° (Prod. No.: 701221)
Or mounting kit with mounting bracket
(Prod. No.: 701224)
Or large clamp foot adapter
(Prod. No.: 701253)
Suitable for stationary use according to
class 5M1
38 Mounting brackets catalog V4 DLoG

5.4. Vibration isolation
5.4.1. 6 elastomer springs mounting kit
Only on request!
Suitable for:
DLoG IPC 7/215
DLoG Mounting brackets catalog V4 39

6. DLoG ITC 7
6.1.1. Mounting kit with mounting bracket tiltable up to 150° (table)
Prod. No.: 701283
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Screw set (customer side)
6.1.2. Mounting kit with mounting bracket tiltable up to 90° (wall)
Prod. No.: 701285
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Screw set (customer side)
40 Mounting brackets catalog V4 DLoG

6.1.3. Clamp foot / clamp foot adapter, small clamp foot
Prod. No.: 510290
6.1.4. Flat clamp foot adapter
Prod. No.: 701231
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Clamp foot adapter, Prod. No. 701234 or
Mounting bracket Prod. No. 515112 -
UPON REQUEST.
Screw set (customer side)
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Small clamp foot, Prod. No. 510290
Screw set (customer side)
DLoG Mounting brackets catalog V4 41

6.1.5. Tall clamp foot adapter
Prod. No.: 701234
6.1.6. Mounting kit with mounting bracket
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Small clamp foot, Prod. No. 510290
Screw set (customer side)
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Mounting bracket, Prod. No. 515112 -
UPON REQUEST.
Screw set (customer side)
42 Mounting brackets catalog V4 DLoG

6.1.7. Wall adapter mounting kit
Prod. No.: 701244
Prod. No.: 701260
6.1.8. RAM Mount ® long mounting kit, 2.25" ball
Plate / Arm 215 mm long / Plate
Prod. No.: 701297
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Includes screw set (for walls of 12 mm to
17 mm thickness), Prod. No. 701244
Or screw set (for walls of 27 mm to
37 mm thickness), Prod. No. 701260
Suitable for stationary use according to
class 5M1
Requires:
Small clamp foot, Prod. No. 510290
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Screw set (customer side)
DLoG Mounting brackets catalog V4 43

6.1.9. RAM Mount ® short mounting kit, 2.25" ball
Plate / Arm 130 mm long / Plate
Prod. No.: 701298
Suitable for:
DLoG ITC 7
Technical data:
Includes screw set (PC-side)
Suitable for stationary use according to
class 5M1
Requires:
Screw set (customer side)
44 Mounting brackets catalog V4 DLoG

7. Suggested Solutions
7.1. Universal
7.1.1. Welded mounting I mounting kit
Prod. No.: 701238
7.1.2. Double plate I-35 mounting kit
Prod. No.: 701262
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Plate size: 160x150 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter
(Prod. No.: 701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Screw length (M10) 35 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
DLoG Mounting brackets catalog V4 45

7.1.3. Double plate I-70 mounting kit
Prod. No.: 701237
7.1.4. Double plate I-90 mounting kit
Prod. No.: 701236
Handle
bar
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side and PC side)
Max. handlebar width 120 mm,
handlebar height 60 +/- 5 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side and PC side)
Max. handlebar width 80 mm,
handlebar height 40 +/- 5 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
46 Mounting brackets catalog V4 DLoG

7.1.5. Double plate IV-90 mounting kit
Prod. No.: 701261
7.1.6. Counterplate I-30 mounting kit
Prod. No.: 701242
Roof grid
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Screw length (M10) 90 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Screw length (M8) 30 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
DLoG Mounting brackets catalog V4 47

7.1.7. Counterplate I-70 mounting kit
Prod. No.: 701259
7.1.8. Counterplate I-80 mounting kit
Prod. No.: 701263
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Screw length (M8) 70 mm
Suitable for mobile use according to class
5M3
Requires:
Small clamp foot (Prod. No.: 510290) and
clamp foot adapter (Prod. No.: 701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Screw length (M8) 80 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
48 Mounting brackets catalog V4 DLoG

7.1.9. Plate II-70 mounting kit
Prod. No.: 701255
7.1.10. Mounting bridge 782x150x110x8 mm
Prod. No.: 701440
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Screw length (M10) 70 mm
Max. section width: 80 mm
Suitable for mobile use according to
class 5M3
Requires:
4 elastomer springs mounting kit
(Prod. No.: 701252) and (Prod. No.:
701251) and mounting bracket 100°
tiltable (Prod. No.: 701277)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Side parts 150x110x8 mm included
separately
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter
(Prod. No.: 701234)
DLoG Mounting brackets catalog V4 49

7.1.11. Plate 540x110x8 mm mounting kit
Prod. No.: 701441
7.1.12. Extension mounting kit
Prod. No.: 701033
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp food adapter (Prod. No.:
701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Length 270 mm
Requires:
Mobile mounting bracket (Prod. No.:
701229); suitable for mobile use
according to class 5M3
50 Mounting brackets catalog V4 DLoG

7.1.13. I-30 mounting kit, washers
Prod. No.: 701035
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Screw length (M8) 30 mm
Washer dimensions 100x180 mm
no tensile loading of the elastomer
springs
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket
(Prod. No.: 701229)
DLoG Mounting brackets catalog V4 51

7.2. Jungheinrich ® Forklift
7.2.1. JH ECE 20
Prod. No.: 701272
7.2.2. JH ECE 20, 95 model
Prod. No.: 701241
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
4 elastomer springs mounting kit
(Prod. No.: 701252) and mobile
mounting bracket (Prod. No.: 701229)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Suitable for mobile use according to
class 5M3
Requires:
3 elastomer springs mounting kit
(Prod. No.: 701243) and mobile
mounting bracket (Prod. No.: 701229)
52 Mounting brackets catalog V4 DLoG

7.2.3. JH ECE 20
Prod. No.: 701281
7.2.4. JH ECE 20, 95 model, wide shaft
Prod. No.: 701034
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
4 elastomer springs mounting kit
(Prod. No.: 701252) and mounting
bracket 100° tiltable (Prod. No.: 701227)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Suitable for mobile use according to
class 5M3
Requires:
3 elastomer springs mounting kit
(Prod. No.: 701243) and mobile
mounting bracket (Prod. No.: 701229)
DLoG Mounting brackets catalog V4 53

7.2.5. JH ETX 125, 99 model, ETX 150, 84 model and ETV 14, 96 model
Prod. No.: 701808
7.2.6. JH ETX K 125, 2002 model
Prod. No.: 701812
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Screw length (M8) 35 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510212)
and clamp foot adapter (Prod. No.:
701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
54 Mounting brackets catalog V4 DLoG

7.2.7. JH ETX AC 125TG, 02 model and ETV 214, 04 model
Prod. No.: 701813
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
7.2.8. JH EFG 16L, 00 mod., EFG DFAC15, 03 mod., Linde E 16, 97 mod.
Prod. No.: 701814
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
DLoG Mounting brackets catalog V4 55

7.2.9. JH ECP 100-3, 98 model and ECP LG 120, 96 model
Prod. No.: 701815
7.2.10. JH ECP 100-190E, 2000 model
Prod. No.: 701816
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket (Prod. No.:
701229)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
Mobile mounting bracket (Prod. No.:
701229)
56 Mounting brackets catalog V4 DLoG

7.2.11. JH ETV 214, 04 model
Prod. No.: 701265
7.2.12. JH ETV 214, ETV 14 and ETVA 13.5
Prod. No.: 701821
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Screw length (M8) 35 mm
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
DLoG Mounting brackets catalog V4 57

7.3. Still ® Forklift
7.3.1. Still GX 09, 99 model
Prod. No.: 701807
7.3.2. Still GX 10, 01 model
Prod. No.: 701806
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
58 Mounting brackets catalog V4 DLoG

7.3.3. Still EGV S13
No picture: Prod. No.: 701279
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Suitable for mobile use according to class 5M3
Requires:
Wall adapter I-30 mounting kit (Prod. No.: 701244)
7.3.4. Still EGV 12, 99 model
Prod. No.: 701822
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Suitable for mobile use according to
class 5M3
Requires:
Wall adapter I-30 mounting kit (Prod.
No.: 701244)
DLoG Mounting brackets catalog V4 59

7.3.5. Still CS 20, 96 model
7.3.6. Still CS 20
Prod. No.: 701256
Prod. No.: 701239
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Suitable for mobile use according to class
5M3
Requires:
100° tiltable mounting bracket (Prod. No.:
701227) and 4 elastomer springs S12
mounting kit (Prod. No.: 701252)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Suitable for mobile use according to class
5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.:
701234)
60 Mounting brackets catalog V4 DLoG

7.3.7. Still MX 13, 97 model
7.3.8. Still CS 20
Prod. No.: 701805
Prod. No.: 701826
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
clamp foot adapter (Prod. No.: 701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Handlebar width 80 mm
Suitable for mobile use according to
class 5M3
Requires:
4 elastomer springs mounting kit
(Prod. No.: 701252) mobile mounting
bracket (Prod. No.: 701229)
DLoG Mounting brackets catalog V4 61

7.4. Linde ® Forklift
7.4.1. Linde E 16, 97 m., JH EFG 16L, 00 m., JH EFG DFAC15, 03 m.
7.4.2. Linde L 12
Prod. No.: 701814
Prod. No.: 701264
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set
Suitable for mobile use according to class
5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.: 701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Suitable for mobile use according to
class 5M3
Requires:
Wall adapter I-30 mounting kit
(Prod. No.: 701244)
62 Mounting brackets catalog V4 DLoG

7.4.3. Linde L 14AP
No picture: Prod. No.: 701277
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC-side and forklift-side)
Suitable for mobile use according to class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.: 701234)
7.4.4. Linde E 16-02
Prod. No.: 701267
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter
(Prod. No.: 701234)
DLoG Mounting brackets catalog V4 63

7.4.5. Linde EK 15
Prod. No.: 701269
(with base plate 517356)
No picture: Prod. No.: 701276
(with base plate 517362)
7.4.6. Linde E14-02
Prod. No.: 701811
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (forklift side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter
(Prod. No.: 701234)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data :
Incl. screw set (forklift side)
Suitable for mobile use according to
class 5M3
Requires :
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter
(Prod. No.: 701234)
64 Mounting brackets catalog V4 DLoG

7.4.7. Linde N 20
7.4.8. Linde R 20
Prod. No.: 701254
Prod. No.: 701268
Suitable for:
DLoG MPC 6/110
DLoG X 10
Technical data:
Incl. screw set (forklift side)
Suitable for mobile use according to
class 5M3
Requires:
100° tiltable mounting bracket (Prod.
No.: 701227) and 4 elastomer spring
S12 mounting kit (Prod. No.: 701252)
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to
class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter
(Prod. No.: 701234)
DLoG Mounting brackets catalog V4 65

7.4.9. Linde R 14, 00 model
7.4.10. Linde H 20T, 03/04 model
7.4.11. Linde T 18
Prod. No.: 701810
No picture: Prod. No.: 701270
Suitable for:
DLoG MPC 6/110
DLoG X 10
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to class 5M3
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Includes screw set (PC-side and forklift
side)
Suitable for mobile use according to
class 5M3
No picture: Prod. No.: 701275
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to class 5M3
Requires:
Small clamp foot (Prod. No.: 510290) and clamp foot adapter (Prod.
No.: 701234)
66 Mounting brackets catalog V4 DLoG

7.4.12. Linde T 20R
Prod. No.: 701280
7.4.13. Linde T 20R, 03/04 model
No picture: Prod. No.: 701271
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 7, DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Suitable for limited mobile use according to class 5M2
Suitable for:
DLoG MPC 6/110
DLoG X 10
Technical data:
Incl. screw set
Suitable for mobile use according to
class 5M3
Requires:
100° tiltable mounting bracket (Prod.
No.: 701227) and 3 elastomer spring
mounting kit (Prod. No.: 701243)
DLoG Mounting brackets catalog V4 67

7.4.14. Linde T 20SF
No picture: Prod. No.: 701278
Suitable for:
DLoG MPC 6/110
DLoG X 10
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to class 5M3
Requires:
Small clamp foot (Prod. No.: 510290)
and clamp foot adapter (Prod. No.: 701234)
7.4.15. Linde SPT
Prod. No.: 701432
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to
class 5M3
Requires:
Double RAM mount (Prod. No.: 701258)
and VESA oval mounting plate
(Prod. No.: 701257)
68 Mounting brackets catalog V4 DLoG

7.4.16. Linde T 20
7.4.17. Linde T20R
Prod. No.: 701434
Prod. No.: 701818
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
For mast width of 705 mm
Suitable for mobile use according to
class 5M3
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Suitable for mobile use according to
class 5M3
Requires:
double RAM mount (Prod. No.: 701258)
and VESA oval mounting plate
(Prod. No.: 701257)
DLoG Mounting brackets catalog V4 69

7.4.18. Linde L16AP
Prod. No.: 701439
Suitable for:
DLoG MPC 6/110 and DLoG MPC 6/112
DLoG X 10 and DLoG X 12
Technical data:
Incl. screw set (PC and forklift side)
Plate: 460x100 mm
Suitable for mobile use according to
class 5M3
Requires:
double RAM mount (Prod. No.: 701258)
and 2x VESA oval mounting plate
(Prod. No.: 701257)
70 Mounting brackets catalog V4 DLoG

8. Index DLoG Production No.
510290 .........................................................................21, 22, 25, 30, 31, 34, 41, 42, 43, 45, 46, 47, 48, 49, 50
510291 .............................................................................................................................................................38
515112 .......................................................................................................................................................41, 42
517356 .............................................................................................................................................................64
517362 .............................................................................................................................................................64
701032 .......................................................................................................................................................24, 33
701033 .............................................................................................................................................................50
701034 .............................................................................................................................................................53
701035 .............................................................................................................................................................51
701195 .............................................................................................................................................................36
701221 .......................................................................................................................................................35, 38
701224 .......................................................................................................................................................35, 38
701225 .....................................................................................................................................16, 18, 21, 27, 30
701227 .......................................................................................................................................................17, 26
701229 .......................................................................................................16, 17, 24, 25, 26, 30, 33, 34, 50, 51
701231 .................................................................................................................................................22, 31, 41
701233 .....................................................................................................................................16, 18, 21, 27, 30
701234 .................................................................................................14, 21, 30, 41, 42, 45, 46, 47, 48, 49, 50
701236 .............................................................................................................................................................46
701237 .............................................................................................................................................................46
701238 .............................................................................................................................................................45
701239 .............................................................................................................................................................60
701240 .............................................................................................................................................................12
701241 .............................................................................................................................................................52
701242 .............................................................................................................................................................47
701243 .................................................................................................................................................16, 24, 33
701244 ...........................................................................................................................................15, 23, 32, 43
701251 .................................................................................................................................................25, 34, 49
701252 .................................................................................................................................................25, 34, 49
701253 .............................................................................................................................................................38
701254 .............................................................................................................................................................65
701255 .............................................................................................................................................................49
701256 .............................................................................................................................................................60
701257 .......................................................................................................................................................19, 28
701258 .......................................................................................................................................................19, 28
701259 .............................................................................................................................................................48
701260 ...........................................................................................................................................15, 23, 32, 43
701261 .............................................................................................................................................................47
701262 .............................................................................................................................................................45
701263 .............................................................................................................................................................48
701264 .............................................................................................................................................................62
701265 .............................................................................................................................................................57
701267 .............................................................................................................................................................63
701268 .............................................................................................................................................................65
701269 .............................................................................................................................................................64
701270 .............................................................................................................................................................66
701271 .............................................................................................................................................................67
701272 .............................................................................................................................................................52
701275 .............................................................................................................................................................66
DLoG Mounting brackets catalog V4 71

701276............................................................................................................................................................. 64
701277....................................................................................................................................................... 49, 63
701278............................................................................................................................................................. 68
701279............................................................................................................................................................. 59
701280............................................................................................................................................................. 67
701281............................................................................................................................................................. 53
701282............................................................................................................................................................. 13
701283............................................................................................................................................................. 40
701285............................................................................................................................................................. 40
701286............................................................................................................................................................. 12
701287............................................................................................................................................................. 11
701290............................................................................................................................................................. 10
701291............................................................................................................................................................... 9
701292............................................................................................................................................................... 9
701296............................................................................................................................................................. 36
701297................................................................................................................................................. 19, 28, 43
701298................................................................................................................................................. 20, 29, 44
701432............................................................................................................................................................. 68
701434............................................................................................................................................................. 69
701439............................................................................................................................................................. 70
701440............................................................................................................................................................. 49
701441............................................................................................................................................................. 50
701462........................................................................................................................................... 13, 20, 29, 37
701805............................................................................................................................................................. 61
701806............................................................................................................................................................. 58
701807............................................................................................................................................................. 58
701808............................................................................................................................................................. 54
701811............................................................................................................................................................. 64
701812............................................................................................................................................................. 54
701813............................................................................................................................................................. 55
701814....................................................................................................................................................... 55, 62
701815............................................................................................................................................................. 56
701816............................................................................................................................................................. 56
701818............................................................................................................................................................. 69
701821............................................................................................................................................................. 57
701822............................................................................................................................................................. 59
701826............................................................................................................................................................. 61
72 Mounting brackets catalog V4 DLoG

For Your Notes:
DLoG Mounting brackets catalog V4 73