Starters and Contactors - Access Elevator Supply
Starters and Contactors - Access Elevator Supply
Starters and Contactors - Access Elevator Supply
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Universal Products> Smart <strong>Elevator</strong> tech, llc<br />
Universal Products Smart <strong>Elevator</strong> Tech, LLC<br />
SmaRt ElEvatoR tEch, llc<br />
Retracta ladder®<br />
A retractable elevator pit ladder engineered to<br />
fit tight clearances where traditional, stationary<br />
pit ladders do not fit .<br />
• 7-inch clearance rung to wall when deployed<br />
for full OSHA <strong>and</strong> ASME A17.1-2004 with<br />
st<strong>and</strong>ard hoistway width<br />
• 3-inch wall to ladder when retracted for<br />
minimal car to hoistway clearance<br />
• Electrical Protective prevents elevator<br />
operation when ladder is deployed<br />
• Gas spring assist<br />
• Pull pin lifting <strong>and</strong> locking mechanism<br />
• Reversible installation<br />
• OSHA Safety Yellow powder coat painted<br />
• California compliant<br />
• Sized for st<strong>and</strong>ard pit depths<br />
• Proudly made in the USA<br />
• Patent Pending<br />
model # Size model # Size<br />
RL36 3’ RL72 6’<br />
RL48 4’ RL84 7’<br />
RL60 5’<br />
adjusta ladder <br />
A stationary elevator pit ladder engineered to<br />
fit various car to wall clearances <strong>and</strong> maximize<br />
center of rung to wall .<br />
• 4-1/2” to 7” clearance wall to center of rung in<br />
1/2” increments<br />
• Top bracket to stabilize the upper h<strong>and</strong> risers<br />
• Traction Tread non-slip rungs<br />
• OSHA Safety Yellow powder coat<br />
• Sectioned for reduced shipping costs <strong>and</strong> ease<br />
of h<strong>and</strong>ling<br />
• Strongest <strong>and</strong> safest elevator pit ladder on<br />
the market<br />
• Sized for st<strong>and</strong>ard pit depths<br />
• Proudly made in the USA<br />
model # Size model # Size<br />
AL36 3’ AL72 6’<br />
AL48 4’ AL84 7’<br />
AL60 5’<br />
low-Profile Fishplate <br />
A Seismic Risk Zone 2 or Greater guide rail<br />
fishplate for 15 lb/ft guide rails engineered to fit<br />
tight clearances where traditional T-section or<br />
minimum clearance fishplates do not fit .<br />
• 1-inch clearance back of guide rail to wall<br />
or beam<br />
• Fits st<strong>and</strong>ard hoistway for seismic <strong>and</strong><br />
non-seismic installations or narrower<br />
hoistways for the same elevator capacities<br />
• Designed for seismic retrofits with tight<br />
clearance to existing walls <strong>and</strong> beams without<br />
removing the rail<br />
• Meets ASME A17.1, 1996 – 2008 including<br />
sections 2.23.7, 8.4.8.5 <strong>and</strong> 8.4.8.6. The<br />
section modulus <strong>and</strong> moment of inertia of the<br />
assembly is equal to or greater than the guide<br />
rail. Models A <strong>and</strong> B for two common rail end<br />
hole dimensions. Other hole spacing available<br />
by special order.<br />
• Custom manufactured ASTM A307 Grade A<br />
bolts comply with A17.1, section 2.23.2.1(b) <strong>and</strong><br />
8.4.8.6(h)<br />
• Two bolt lengths available to accommodate<br />
both modern counterbored rails <strong>and</strong> older<br />
non-counterbored rails<br />
• Certified by a California licensed structural<br />
engineer, calculations available upon request<br />
• Proudly made in the USA<br />
Rope align Block <br />
An engineered assembly to be mounted on the<br />
elevator hoist ropes above the car or counterweight<br />
crosshead to align the ropes above the<br />
shackles to eliminate clearance problems .<br />
how to Determe the Part Number<br />
Rope align Block Quantity<br />
of Ropes<br />
Example: RAB4 – 0 .625 – 1 .00 would be a Rope<br />
Align Block for four (4) hoist ropes that are<br />
5/8” (0 .625”) in size <strong>and</strong> with a pitch (spacing)<br />
of 1” (1 .00”) .<br />
Also see the drawing sheet for the current<br />
st<strong>and</strong>ard part numbers .<br />
Universal Products Smart <strong>Elevator</strong> Tech, LLC<br />
2 <strong>Access</strong> ElEvator supply • 800-266-8654 • Fax 510-652-5043 • www.aesupply.com<br />
<strong>Access</strong> ElEvator supply • 800-266-8654 • Fax 510-652-5043 • www.aesupply.com<br />
3<br />
dash Diameter<br />
of Ropes<br />
dash<br />
RAB X – X .XXX – X .XXX<br />
Rope Pitch<br />
(center-to-center)<br />
A Rope Align Block can be provided for any rope<br />
quantity, diameter <strong>and</strong> pitch . Simply fill in the<br />
blanks per the table .<br />
For more information, call <strong>Access</strong> <strong>Elevator</strong> <strong>Supply</strong> .<br />
Universal Products> Smart <strong>Elevator</strong> tech, llc
Change language