Starters and Contactors - Access Elevator Supply

Softstarters: Siemens/Nordic
Softstarters Siemens/Nordic
Call Access today
for low prices and
same day shipping
on all Siemens Soft
Starters. We ship
from either East
Coast or West Coast
warehouses.
For a complete
troubleshooting
guide, contact
Access Elevator
Supply or visit
www.AEsupply.com
Softstarters
SiemeNS/Nordic
The industry Standard for electronic Soft Starters
Siemens/Nordic elevator starters are specifically designed
and manufactured for the elevator industry with over
150,000 units installed and running.
Features
• Heavy duty, full size, and fully rated @ 80 starts per hour
Not a light duty uprated miniature electronic starter that has to rely
on constant cooling from a fan, the Siemens/Nordic starter has set the
industry standard for heavy-duty service.
• Easy to read self-diagnostics and easy to set starting and overload amps
All done with the keypad and two-line LCD display. Just follow
the prompts.
• Provides smooth, stepless soft-start of elevator motor
Reduces or eliminates the problem dimming lights.
Protects sensitive medical and diagnostic equipment and computers.
Reduces wear of motor, pump, valves, seals, and other mechanical
components.
• Built in phase loss/phase reversal protection plus field adjustable
electronic overload relay
Fully protects expensive elevator motors and service components.
• No moving parts
Eliminates the expense of replacing contact kits.
• Significant noise reduction
No electromechanical contactors closing and opening. Delivers
quiet operation.
• Automatic status monitoring
Siemens/Nordic starters automatically check for proper motor
connections upon initial start-up.
• Windows-based computer diagnostic software also available
Installation and Set-up
One of the many reasons that the Siemens/Nordic elevator starter is the
industry’s preferred product is its ease of set-up.
After making the control power connections (remember, only use
120VAC for the motor run signal on terminal 4), make the line and load
connections. The starter is wired at the factory for a wye-delta motor,
6 or 12 leads.
If you have a 9-lead motor or a 3- or 6-lead in-line motor, you must
reconnect the starter to run across the line. Check to make sure the
starter can handle the larger draw of an across-the-line motor. For in-line
connections, consult the instruction book.
continued on page 84
Soft-Start Hydraulic Elevator Appllication Guide*
Table 1:
For use with
Wye-Delta Wound
motors
200 – 460 Volts
Table 2:
For use with
Wye-Delta Wound
motors
575 – 600 Volts
(primarily Canada)
Table 3:
For use with
Across - the - Line
motors
200 – 460 Volts
Table 4:
For use with
Across-the-Line
motors
575 –600 Volts
(primarily Canada)
* For traction elevator applications, call Access
Softstarters Siemens/Nordic
82 Access ElEvator supply • 800-266-8654 • Fax 510-652-5043 • www.aesupply.com
Access ElEvator supply • 800-266-8654 • Fax 510-652-5043 • www.aesupply.com
83
HP @
200V
HP @
230V
HP @
460V
rated
current
(Amps)
Overload
Range
(Amps)
current
Limit Range
(Amps)
manufactured
Catalog #
5 7.5 15 22 7 – 27 26 – 94 72EG34AFP
7.5 10 25 35 12 – 44 41 – 148 72GG34AFP
10 15 30 42 14 – 53 49 – 179 72HG34AFP
15 20 40 55 18 – 69 64 – 234 72JG34AFP
20 25 50 68 22 – 85 79 – 289 72KG34AFP
25 30 60 80 26 – 100 93 – 340 72LG34AFP
30 40 75 105 35 – 131 121 – 447 72MG34AFP
40 50 100 130 43 – 163 151 – 553 72NG34AFP
50 60 125 156 52 – 196 181 – 663 72PG34AFP
75 100 — 252 83 – 315 292 – 1071 72RG32AFP
HP @
460V
HP @
575V
rated
current
(Amps)
Overload
Range
(Amps)
current
Limit Range
(Amps)
manufactured
Catalog #
15 20 22 7 – 27 26 – 94 72EG35AFP
25 30 35 12 – 44 41 – 148 72GG35AFP
30 40 42 14 – 53 49 – 179 72HG35AFP
40 50 55 18 – 69 64 – 234 72JG35AFP
50 60 68 22 – 85 79 – 289 72KG35AFP
60 75 80 26 – 100 93 – 340 72LG35AFP
75 100 105 35 – 131 121 – 447 72MG35AFP
100 125 130 43 – 163 151 – 553 72NG35AFP
125 150 156 52 – 196 181 – 663 72PG35AFP
HP @
200V
HP @
230V
HP @
460V
rated
current
(Amps)
Overload
Range
(Amps)
current
Limit Range
(Amps)
manufactured
Catalog #
— 5 10 18 6 – 25 24 – 85 72GG34AFP
5 7.5 15 22 8 – 30 28 – 10 72HG34AFP
7.5 10 20 28 10 – 39 36 – 135 72JG34AFP
7.5 10 25 35 13 – 49 45 – 166 72KG34AFP
10 15 30 42 15 – 57 53 – 196 72LG34AFP
15 20 40 55 20 – 7 70 – 257 72MG34AFP
20 25 50 68 24 – 93 87 – 319 72NG34AFP
25 30 60 80 29 – 112 104 – 382 72PG34AFP
40 50 — 130 48 – 181 168 – 618 72RG32AFP
HP @
460V
HP @
575V
rated
current
(Amps)
Overload
Range
(Amps)
current
Limit Range
(Amps)
manufactured
Catalog #
10 15 18 6 – 25 24 – 25 72GG35AFP
15 20 22 8 – 30 28 – 103 72HG35AFP
20 25 28 10 – 39 36 – 135 72JG35AFP
25 30 35 13 – 49 45 – 166 72KG35AFP
30 40 42 15 – 57 53 – 196 72LG35AFP
40 50 55 20 – 75 70 – 257 72MG35AFP
50 60 68 24 – 93 87 – 319 72NG35AFP
60 75 80 29 – 119 104 – 382 72PG35AFP
Softstarters: Siemens/Nordic