to Download our 2012 Catalog - Diode LED

connector = 4.5”
1.3” between centers
Actual width
size shown
0.5”
4” between cut points
Technical Specifications: SPECTRUM Wet Location RGB Strip Light
item # length color lumens / ft. beam angle power consumption / ft. IP rating LEDs / ft.
DI-0071 9.5’ RGB 70 max. 120° 2.2W / 180mA IP68 9
Each 19 foot section (two 9.5 foot spools) requires a dedicated line from the power supply and controller or
to an RGB Strip Amplifier to avoid voltage drop.
Accessories
Wet Location RGB Splice Connector Pair
(DI-0766) 4.7” x 0.4”
The Wet Location RGB Splice Connector converts wet location
RGB strip light plugs to bare wires for connection to an RGB
color controller. Sold by the pair.
39 Inch Wet Location RGB Strip-to-Strip Bending Extension
(item #DI-0778) 39.4” x 0.6”
Creates an extension between sections of SPECTRUM Wet Location
Strip Light.
Additional SPECTRUM Wet Location Strip Mounting Clips
(item #DI-0754) 0.9” x 0.2” x 0.2”
Qty of 10 clips and 20 Phillips head screws.
(9 clips, 18 screws, 5 end caps, and 1 Waterproof Solder Connector
Pair are already included with each spool.)
22/4 Wire
per foot (item #DI-0769-F) 0.4“ x 0.1”
This four-strand, 22 gauge wire creates extensions between colorchanging
fixtures, and allows for parallel runs of non-waterproof
SPECTRUM RGB Strip Light. Available by the foot.
WWW.DIODELED.COM 1.877.817.6028
37