to Download our 2012 Catalog - Diode LED

ARRAY 24V Linkable Light Bar Accessories
Bar-to-Bar Connector
0.45” x 0.3” x 0.1” (item #DI-0266)
Qty of 25 (item #DI-0266-25)
Qty of 50 (item #DI-0266-50)
Seamlessly connects two bars.
A pair comes with each bar.
9” Bar-to-Bar Extension Cable
9” x 0.4” x 0.3” (item #DI-0267)
Extension between two bars.
39” Bar-to-Bar Extension Cable
39” x 0.4 x 0.2” (item #DI-0268)
Extension between two bars.
Cable-to-Cable Extension Connector
0.5” x 0.4 x 0.2” (item #DI-0269)
Connects any two Bar-to-Bar
Extension Cables.
Cable-to-Cable Splitter Connector
1.45” x 0.8” x 0.2” (item #DI-0270)
One input and four outputs power
four unlinked bars with the same
source.
Bar-to-Adapter Cable
11.5” x 0.4 x 0.2” (item #DI-0271)
Connects a bar to a Plug-In Adapter
with a straight-type bar plug.
Right Angle Bar-to-Adapter Cable
19” x 0.4 x 0.2” (item #DI-0272)
Connects a bar to a Plug-In Adapter
with a right-angle-type bar plug.
39” Bar-to-Adapter Extension Cable
39” x 0.4 x 0.2” (item #DI-0273)
Extension between a bar and the
Bar-to-Adapter Cables (#DI-0271
and # DI-0275).
90° Bending Extension
2.2” x 0.4” x 0.2” (item #DI-0277)
Connects two bars with a joint that
bends 0° - 90°.
On/Off Switch
12.5” x ” 0.8” x 0.75” (item #DI-0275)
Cables length: 7”
Connects a bar and Plug-In Adapter.
Hard-Wire Connector
19.5” x 0.4” x 0.2” (item #DI-0276)
Qty of 25 (item #DI-0276-25)
Qty of 50 (item #DI-0276-50)
Directly connects a bar to a Hard-
Wired Driver.
Right Angle Hard-Wire Connector
39” x 0.4” x 0.2” (item #DI-0279)
Directly connects a bar to a Hard-
Wired Driver.
Array In-Line Dimmer
2” x 1.75” x 0.5” (item #DI-0295)
With the same dimensions as the
Array bar, it attaches seemlessly
into any array installation.
REIGN 12V / 24V Dimmer Switches
(page 73)
The REIGN DImmer is connected
between the 12V or 24V DC power
supply and 12V or 24V LED fixture,
and offers 100%-0% dimming. Limit
of 100W.
Mounting Clips and Screws Pair
(item #DI-0274) / Qty of 25 (item
#DI-0274-25) / Qty of 50 (item #DI-
0274-50)
One pair of this clip is included with
each bar and three clips included
with 35.5” and 47.3” bars.
45° Angle Mounting Clips
and Screws pair
(item #DI-0278)
Qty of 25 (item #DI-0278-25)
Qty of 50 (item #DI-0278-50)
Mounts a bar at a 45° angle.
62 1.877.817.6028 WWW.DIODELED.COM