to Download our 2012 Catalog - Diode LED
to Download our 2012 Catalog - Diode LED
to Download our 2012 Catalog - Diode LED
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
RGB Signal Amplifiers<br />
If you’re creating an installation with SPECTRUM or DAZZLE RGB Strips that is longer than 16 feet, you’ll need the SPECTRUM<br />
RGB Strip Amplifier for indoor applications, or <strong>our</strong> waterproof one for wet locations. Note: Each amplifier must be wired separately <strong>to</strong><br />
a 12V DC power supply. RGB Amplifiers are not for use with SPLASH Series Industrial RGB Wall Washers.<br />
Waterproof RGB Signal Amplifier<br />
(item #DI-0717) 3.75” x 2” x 1.2”<br />
Cable lengths: 8”<br />
Allows you <strong>to</strong> power and color-control sections of SPECTRUM and DAZZLE High<br />
Output RGB Strip Light greater than 16 feet by amplifying the controller signal and<br />
the power. One Signal Amplifier is necessary for every 16 feet of SPECTRUM or<br />
DAZZLE High Output RGB Strip Light. It can be used for wet location outdoor <strong>LED</strong><br />
lighting in a hard-wire installation.<br />
RGB Signal Amplifier<br />
(item #DI-0718) 4.2” x 2.5” x 1”<br />
Allows you <strong>to</strong> power and color-control sections of SPECTRUM and DAZZLE High<br />
Output RGB Strip Light greater than 16 feet by amplifying the controller signal and<br />
the power. One Signal Amplifier is necessary for every 16 feet of SPECTRUM or<br />
DAZZLE High Output RGB Strip Light. Power is delivered <strong>to</strong> the amplifier via an<br />
independant 12V DC adapter, DC Adapter Splice Cable (DI-0712M), or a DC Wire<br />
Plug (DI-1713M) for hard-wired power installation.<br />
Mini RGB Signal Amplifier<br />
(item #DI-0765) 1.6” x 1.1” x 0.7”,<br />
RGB cable lengths: 6”<br />
DC cable length: 2.5”<br />
Amplifies the color signal and power on sections of SPECTRUM and DAZZLE High<br />
Output RGB Strip Light longer than 16 feet, and is great for tight spaces. It can be<br />
used for wet location outdoor <strong>LED</strong> lighting. Power is delivered <strong>to</strong> the amplifier via an<br />
independant 12V DC adapter, DC Adapter Splice Cable (DI-0712M), or a DC Wire<br />
Plug (DI-1713M) for hard-wired power installation.<br />
Screwdriver Kit<br />
(item #DI-0779) 3.75” x 2.5” x 0.5”<br />
Perfect for installing any mounting<br />
clips, and for use with RGB color<br />
controllers.<br />
Includes:<br />
• #1 Philips head<br />
• #0 Philips head<br />
• 1.2mm flat head<br />
• 1.4mm flat head<br />
• 1.8mm flat head<br />
• 2.0mm flat head<br />
DC Wire Plug<br />
Male white (DI-1713M)<br />
1.6” x 0.6” x 0.5”<br />
Converts two-strand wire <strong>to</strong> a DC<br />
plug without soldering.<br />
Adapter Splice Cable<br />
Male (item #DI-0712M)<br />
42” x 0.45”<br />
Connects RGB Amplifiers <strong>to</strong> a hardwired<br />
driver.<br />
WWW.DIODE<strong>LED</strong>.COM 1.877.817.6028<br />
47