to Download our 2012 Catalog - Diode LED

0.6”
connector = 3.5”
0.8” between centers
Actual width
size shown
Technical Specifications: CASCADE Light Bar
item # length color color temp. lumens beam
angle
Accessories
power
consumption
IP rating CRI # of LEDs max. bars
per run
DI-0220 12” warm white 2700k 310 120° 3.6W / 300mA IP68 75 15 6
DI-0221 12” cool white 5000k 310 120° 3.6W / 300mA IP68 80 15 6
DI-0222 23.8” warm white 2700k 615 120° 7.2W / 600mA IP68 75 30 3
DI-0223 23.8” cool white 5000k 615 120° 7.2W / 600mA IP68 80 30 3
See how this product compares with our other products on the comparison chart on page 86.
See the CASCADE 12” Light Bar Kit on page 63.
Two mounting clips and screws are included with each bar. For additional mounting clips, see page 82.
Waterproof Plug to DC Adapter Connector
female (item #DI-0710F) 7.5” x 0.4”
male (item #DI-0710M) 7.5” x 0.3”
Connects the CASCADE Light Bar to a Plug-
In Adapter and to DC accessories.
Adapter Splice Cable - female
((item #DI-0712F) 42” x 0.45”
Connects the CASCADE Light Bar to a
Hard-Wired Driver without cutting wires.
Waterproof Male to Female Extension Cables
Available Lengths: 6” (item #DI-0757),
12” (item #DI-0758), 24” (item #DI-0759),
39” (item #DI-0709)
Connector Width: 0.3”
Creates an extension between CASCADE Light
Bars.
Waterproof Splitter Cable
2-way (item #DI-0804)
3-way (item #DI-0805)
5-way (item #DI-0806)
8” x 1” x 0.3”
Connects several CASCADE Light Bars
to one power source.
Waterproof Solder Connector Pair
(item #DI-0725) 4.7” x 0.3”
Connects the CASCADE Light Bar to a Hard-
Wired Driver. One pair included with each bar.
39 Inch DC Extension Cable
(item #DI-0708) 39.4” x 0.5”
Creates an extension between any fixtures
or accessories that use DC plugs.
Additional CASCADE Light Bar Mounting
Clips
(item #DI-0752) 0.75” x 0.5” x 0.6”
Qty of 10 clips and 10 Phillips head screws.
Two clips and screws are included with each
bar.
DC Wire Plug
female white (DI-1713F)
male white (DI-1713M)
1.6” x 0.6” x 0.5”
Converts two-strand wire to a DC plug
without soldering.
REIGN 12V / 24V Dimmer Switches
(page 73)
The REIGN Dimmer is connected between
the 12V or 24V DC power supply and 12V or
24V LED fixture, and offers 100%-0% dimming.
Limit of 100W.
DC Splitter Plugs
2-Way (item #DI-0720) 5.7” x 0.4”
3-Way (item #DI-0705) 8” x 0.6”
5-Way (item #DI-0707) 8” x 0.6”
Connects several Waterproof Plug to
DC Adapter Connectors to one Plug-In
Adapter.
WWW.DIODELED.COM 1.877.817.6028
57