CIMCO CNC-Calc 2 Tutorial

More documents

Recommendations

Info

Figure 8.4 One line of text at a 15° angle. The text is now showing in the drawing and its geometry can now be used for generating the toolpaths. Select the file type (NC Format) for our example letter milling program (e.g. ISO Milling). Figure 8.5 Selection of file type (NC Format). 3
Select the feature Letter Milling by clicking the <strong>CNC</strong>-<strong>Calc</strong> menu, then Millng Operations, Mill Letters, or select the corresponding icon from the Milling Operations toolbar. Figure 8.6 Selecting the feature 'Letter Milling'. The dialog Letter Milling will appear on the left side of the screen as shown above. Here you can enter the coordinates of the Machine Zero (X 0.0; Y 40.0) and the Machine Zero Z (depth: -1 mm.). Further, you should also click on the Parameters button to define e.g. retract height over the part surface. For this example we chose a 2 mm. retract height (see Figure 8.7) below. 4
Page 1 and 2: www.cimco-software.com CIMCO CNC-Ca
Page 3: Once the toolbars have been selecte
Page 7 and 8: Now use window selection to select
Page 9: Your screen should now present “C

CIMCO CNC-Calc 2 Tutorial

Create successful ePaper yourself

Delete template?

Save as template?